When released, the spring-loaded ring handle returns to its recessed position to stay out of the way. These latches open from the inside as well as the outside. From the outside, pull the recessed ring to unlatch. From the inside, slide the release tab on the back of the latch.

For technical drawings and 3-D models, click on a part number.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.

For technical drawings and 3-D models, click on a part number.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold. Latches meet UL 94 HB for flammability.

The mortise-mount latches fit into a cutout (mortise) to mount flush with doors.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits for multiple-point latching to create additional holding power.

Style A-C latches arrive ready for single-point latching; add a latch kit for two-point latching or two latch kits for three-point latching.

Style C latches have a handle that lifts and then folds out of the way when not in use.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod, two bushings, and two rod guides.

For technical drawings and 3-D models, click on a part number.

Choose these keyed alike locks when you need several that open with the same key. The ring handle is recessed to stay out of the way when not in use. These locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the locks when mounting the cam.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount these latches vertically or horizontally. They have two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

Choose keyed alike locks when you need several locks that open with the same key.

Keyed differently locks each open with a different key.

For technical drawings and 3-D models, click on a part number.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

Use a 5/16" hex key to open and close these latches. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the latch can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

In addition to a safety catch to prevent accidental opening, these latches use downward compression to pull surfaces together for sealing gasketed doors. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.