Reducers for Cutting Oil

Filter by

Fitting Type

System of Measurement

Tube OD

Shape

Fitting Connection

Material

Tube Material

Thread Type

UN/UNF (SAE Straight)

Connects To

Pipe Size

Gender

For Use With

Grinders for Bits and Burs

Handheld Power Drills

Pedestal Grinder Wheels

Pharmaceuticals

Solid Particles

Solvents

Acetic Acid (White Vinegar)

Acetic Acid (White Vinegar) (5% Concentration)

Acetic Acid (White Vinegar) (10% Concentration)

Acetic Acid (White Vinegar) (75% Concentration)

Argon/Carbon Dioxide Blend

Hydrochloric Acid (10% Concentration)

Hydrochloric Acid (25% Concentration)

Hydrochloric Acid (37% Concentration)

Liquid Carbon Dioxide

Nitric Acid (10% Concentration)

Phosphoric Acid (85% Concentration)

Salt Water (30% Concentration)

Silane

Sodium Carbonate (Soda Ash)

Sodium Carbonate (Soda Ash) (20% Concentration in Water)

Sodium Hydroxide (Caustic Soda)

Sodium Hydroxide (Caustic Soda) (50% Concentration)

Sodium Hypochlorite (Bleach)

Steam

Sulfur Hexafluoride

Sulfuric Acid

Sulfuric Acid (30% Concentration)

Sulfuric Acid (70% Concentration)

Sulfuric Acid (75% Concentration)

Sulfuric Acid (80% Concentration)

Tungsten Hexafluoride

Dash Size

Thread Size

Nut Material

Sleeve Material

Maximum Pressure @ Temperature

For Tube Wall Thickness

Length

Export Control Classification Number (ECCN)

2B999

EAR99

DFARS Specialty Metals

For Tube Fabrication

Maximum Temperature

REACH

RoHS

Compliant with Exemptions

Flare Style

619 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Right-Angle Flow Rectangular Manifolds

Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.

Straight-Flow Rectangular Manifolds

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

Low-Profile Hex Manifolds

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

Round Manifolds for Hose Lines

Mount these manifolds on the end of a hose line to distribute air, water, or hydraulic fluid to three locations from a single supply source.

Low-Profile Square Manifolds

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Tube Fittings for Metal Tubing

Yor-Lok Fittings for Stainless Steel Tubing

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Precision AN 37° Flared Fittings
for Stainless Steel Tubing

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Vibration-Resistant Precision AN 37°
Flared Fittings for Stainless Steel Tubing

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

Precision Compression Fittings
for Stainless Steel Tubing

Precision Compression Fittings for Copper Tubing

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

Sleeves for Precision Compression
Fittings for Copper Tubing

Nuts for Precision Compression
Fittings for Copper Tubing

Compression Fittings for Copper Tubing

Create a strong connection without heating, flaring, or soldering.

45° Flared Fittings for Copper and Brass Tubing

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

Yor-Lok Fittings for Copper Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal.

37° Flared Fittings for Steel Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Yor-Lok Fittings for Steel Tubing

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.