McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products
    About Threaded Inserts
    industrial info icon

    Choose the right threaded insert for your application and learn how to install it securely.

    Thread-Locking Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Thread-Locking Threaded Inserts.
    With Loctite® adhesive already on the threads, these inserts won’t back out or vibrate loose. The adhesive reaches full strength after 72 hours. Unlike helical inserts, you can install them with a standard drill and tap. However, thread-locking inserts are difficult to remove and reuse.
    After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. For slotted inserts, you can drive with a slotted screwdriver instead.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Inserts
    Installation
    Tools
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg., mm
    Drill Bit
    Size, mm
    For Max.
    Hole Dia., mm
    Drive
    Style
    Pkg.
    Qty.
    Pkg.
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    M20 x 2.5 mmM36 x 4 mm3033
    		33Slotted
    		197084A31000000094110A250000000
    M24 x 3 mmM36 x 4 mm3033
    		33Slotted
    		197084A3170000094110A25000000
     

    Helical Threaded Insert Installation and Prong Break-Off Tools

    Image of Product. Front orientation. Threaded Insert Installation Tools. Helical Threaded Insert Installation and Prong Break-Off Tools, T-Handle.

    T-Handle

    Install helical inserts and break off prongs with one tool and a hammer strike. These tools have a slot that grips your insert’s prong for turning both left- and right-hand threads. Slide an insert onto these tools and drive them a quarter-turn to half-turn below the material’s surface. Then, strike the end of the tool with a hammer to break off the prong. These tools work with pronged helical inserts.
    For Thread Size
    For Pipe Size
    Handle
    Style
    Each
    1 3/8"-12, 1 1/2"-6, 1 1/2"-8, M36 × 1.5 mm, M36 × 3 mm, M36 × 4 mm3/4 BSPP, 1 BSPP, 3/4 NPT, 1 NPTT-Handle92450A193000000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Through-Hole Tap, Installation Tool.

    Installation Tool and

    Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg., mm
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    M36 x 4 mm541 7/16"
    		1.438"4Installation Tool
    Through-Hole Tap    		91732A9750000000
     

    Helical Threaded Inserts

    Image of Product. Pronged. Bottom orientation. Threaded Inserts. Helical Threaded Inserts, Pronged.

    Pronged

    Restore, reinforce, or create threads in metal. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Inserts with
    Installation Tools
    Thread
    Size
    Installed
    Lg., mm
    Drill Bit
    Size
    For Max.
    Hole Dia., mm
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    No. of Inserts
    Included
    Each
    Pronged
     
    18-8 Stainless Steel
    M36 x 4 mm541 15/32"
    		36.1SAE MA3279-187192450A16100000092450A361000000091709A360000000092450A193000000491732A9750000000
     
    Extraction Tools
    Remove installed helical inserts.
    For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.
    For Thread Size
    Each
    For Pronged Helical Inserts
    1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-8, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-8, 1 1/2"-12, M27, M30, M36, M39
    		90254A3600000000
     
    back to top