Use these corrosion-resistant fittings in a low-pressure pipe line.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Use these fittings for low-pressure applications in noncorrosive environments.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

These brass fittings have the strength to handle high-pressure applications.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Their small size makes these miniature fittings a good choice for cramped, confined spaces.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

These PVDF fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. PVDF is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Connect these fittings to air tools for pneumatic applications.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

Use these sleeves with compression nuts and fittings to create a strong seal on copper tubing.

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

Use these fittings to make leak-resistant connections without threading or soldering. Slide them over tubing and turn the end nuts to compress the gasket.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

Use these nuts with compression sleeves and fittings to create a strong seal on stainless steel tubing.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

When used with high-pressure compression fittings and nuts, these sleeves bite into stainless steel tubing to form a strong seal.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Also known as luer lock couplings, these consist of a plug and socket that connect with a half turn. Use in low-pressure applications up to 30 psi.

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Use these sleeves with compression nuts and fittings, sometimes called bite fittings, to create a strong seal on steel tubing. They are also known as ferrules.

Pair these nuts with compression sleeves and high-pressure fittings. They withstand about twice as much pressure as nuts for standard compression fittings, so they’re good for hydraulic power applications.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Barbs grip onto tubing.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Fittings have good corrosion resistance.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

Use these to replace a damaged sleeve (ferrule) in quick-assembly compression nuts.

Tube supports slip inside tubing to prevent the walls from collapsing.

Made of acetal, these compression fittings are lighter in weight than metal compression fittings and won’t absorb moisture when used in wet environments.

Use these nuts with plastic compression fittings to create a seal on plastic tubing. They're moisture-resistant acetal, so they won't absorb water and soften, even in high-humidity environments.

Use these nuts with plastic compression fittings to create a seal on plastic tubing. They have a built-in sleeve (ferrule), so the sleeve is positioned correctly for installation.