We will reply to your message within an hour.
These drums are UN-compliant for shipping.
The inside of these drums is epoxy coated to resist rust.
A threaded opening 4" from the bottom allows you to drain a drum without moving it.
Ship materials in these UN-compliant drums.
These drums are seamless, making them more durable than other plastic drums.
These drums are corrosion resistant and are UN-compliant for shipping.
These drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.
Store food, beverage, and pharmaceutical products in these drums, which have a sanitary design.
Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.
Replace the lids on your sanitary stainless steel drums. These lids are highly polished to prevent product buildup and bacteria growth, so they’re used to store food, beverage, and pharmaceutical products.
Seal lids onto sanitary drums. These silicone seals are FDA compliant for direct contact with food.
Store dry materials in these drums.
A plastic liner and lid allow these drums to be used with wet and dry materials.
These faucets meet NSF/ANSI standards.
Push or pull the faucet handle to open; release the handle and the faucet automatically shuts off.
The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.
Primarily used on drums, these faucets can also be used on tanks, carboys, and other containers.
All of these faucets are primarily used on drums, but can also be used on tanks, carboys, and other containers.
Use these faucets with fluids at least as thick as motor oil.
Install these plugs into drum holes using a drum-plug wrench.
Add a gasket or replace one that's worn out to ensure a tight seal.
Screw these metal protectors into plastic drum openings to replace threads that can become damaged with frequent use.
Prevent drum failure by using these vents to release pressure caused by sudden temperature changes and vacuum buildup caused by draining liquids.
Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.
Prevent tampering with the contents of your drum while allowing access for filling.
Use these drums for secondary containment or for temporarily storing and transporting leaking containers.
Protect contents from dirt, dust, and other contaminants with these caps.
An additive on these caps prevents static charge from building up on the surface.
Secure 30- and 55-gallon steel drums.
These plastic batch cans meet NSF/ANSI 2 sanitary standards for food environments.
Use the faucet on these batch cans for easy dispensing.
These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.
Also known as milk cans, these have a narrow mouth for controlled pouring.
These corrosion-resistant cans have a built-in faucet for dispensing.
These tubs are crack and dent resistant.
Tubs are made of galvanized steel for corrosion resistance.
These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.
Often used in high-traffic environments, such as parking lots and cafeterias, these waste containers are dent resistant.
A galvanized finish protects these waste containers from rust.
Wheel away waste in these large-capacity containers. Made of seamless heavy duty plastic, they resist cracks, dents, and leaks.
Step on the pedal to open these containers.
Add these 7" tall waste containers to tables, shelves, and small spaces.
Mount these containers to the wall to avoid using valuable floor space.
Recycling labels make it clear these containers are not for waste.
For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.
Store between 30 and 550 gallons in these large tanks.
These tanks are typically used for storing fuel and waste oil.
The bottom of these tanks is sloped to ensure easy and complete drainage.
Store and transport liquids in bulk in sanitary environments such as food and pharmaceutical plants.
The heavy-wall construction makes these tanks durable and easy to clean.
These pallets have removable grating for easy cleaning.
Made of 12-gauge steel, these pallets are more durable than plastic pallets.
The 52" × 52" grating is sized to hold an IBC tank.
Catch 3 to 30 gallons of spills and drips.
Larger than collapsible spill-control trays, these berms hold from 180- to 2,150 gallons and collapse for easy storage.
A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage and have spill capacities up to 60 gallons.
With spill capacities up to 170 gallons, these tubs hold 55-gallon drums.
Keep contents secure with these pails and tight-fitting lids.
Stretch these plastic caps over the tops of pails to keep out dust, bugs, and other debris.
Caps are made with an additive that prevents static charge from building up on the surface.
Made of PVC, these liners have excellent chemical resistance.
These polypropylene liners are rated at least 70° higher than standard liners.
These liners are made of polyethylene.
Liners are made with an additive that prevents electrostatic discharge from building up on the surface.
Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.
These include a barrel and a screw.
Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.
These include a barrel and a screw with an extra-wide (truss) head. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.
Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.
Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.
An unthreaded barrel allows quick assembly with a press or a hammer.
Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.
One-third the weight of steel, aluminum binding barrels and screws resist corrosion in wet environments.
Add length to a binding barrel.
Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.
These barrels and caps are corrosion resistant in wet environments.
Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.
A tamper-resistant Torx driver is required for installation and removal.
Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.
Angled under the head for a flush finish in countersunk holes.
Create strong joints in wood and wood composite.
These binding barrels and screws have good chemical resistance.
More corrosion resistant than 18-8 stainless steel binding barrels and screws, these have excellent resistance to chemicals and salt water.
Sealed with PVC foam under the head to prevent leaks and keep contaminants out.
This lock has a latch bolt to secure doors in the closed position.
Slide the bolt and drop the knob into the notch to secure.
A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.
No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.
Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.
Push the bolt into the strike plate to secure doors, gates, and cabinets.
The mounting screws on these latches are concealed to prevent tampering.
The strike has angled ends so these latches can accept their bolt even when doors become misaligned.
Bolts are spring-loaded to stay latched until you activate the pull.
Pull the chain-grip to unlatch hard-to-reach doors and panels.
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.
Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.
These padlockable latches are reversible for right- and left-hand mounting.
These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.
The mounting screws on these padlockable latches are concealed to prevent tampering.
These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.
Choose these locks if you need locks that each open with a different key.
Choose these locks if you need several locks that open with the same key.
A red indicator on the side of these locks is visible when they are open and hidden when they are locked.
Slide these latches into the strike plate to secure bathroom doors.
Prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. There is a security ring on the lid that separates when the jug is opened.
Also known as closed-head pails, these rectangular jugs have a small top opening. Use them to safely ship hazardous liquids.
Also known as closed-head pails, these round jugs have a small top opening. They safely ship hazardous liquids.
These polyethylene pails have a twist-lock lid that opens and closes without tools and provides a more secure seal than a snap-lock lid.
Add a lid to safely ship with these pails.
These pails come matched with UN-specified lids.
Add a tight-fitting, snap-lock lid to safely ship hazardous materials in these sturdy pails.
Prevent the absorption and permeation of chemicals with these fluorinated pails.
The jug in these kits holds its shape as liquid is dispensed. It comes with a cardboard box for protection.
The jug inside these cardboard containers collapses as it dispenses for uninterrupted flow.
Create a custom spool to store twine, wire, rope, and chain.
No assembly required—these spools are all one piece. Use them to store twine, wire, rope, and chain.
Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.
Create various configurations by snapping these adapters into the ports of keystone wall plates.
Join coaxial cords even if they are a different style or the same gender.
Send a signal from one coaxial cord to multiple devices.
Mount two coaxial cords of the same gender and coaxial connection directly onto a panel cutout.
Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.
Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.
A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.
Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.
Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.
Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.
Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel.
Intended for demanding applications, these reels include an oil- and water-resistant extension cord.
A steel stand makes these reels more rugged than light duty cord reels.
The outlets have covers to keep out water and dust when not in use.
Made of polypropylene, these reels stand up to more impact than other reels, even those made of steel.
Store and transport cords.
Plug a cord into these reels.
Attach the wires in a power cord to these reels for a permanent connection.
Keep an ethernet cord on hand but out of the way.
Transmit audio, video, and data signals over long distances with minimal signal loss.
Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.
Keep the cords connecting your robot controller and teach pendant organized and out of the way, so they won’t become damaged or cause tripping.
Designed for use in food processing and other sanitary environments. You can store them directly on the beams of a pallet rack.
Built to rest directly on the beams of a pallet rack.
Compared to plastic pallets, steel pallets offer the highest load capacities. You can store them directly on the beams of a pallet rack.
Molded indentations hold 55-gallon drums while in transit. When stored in racks, they require a supporting deck surface.
When stored in racks, these pallets require a supporting deck surface.
Unlike nestable pallets, these pallets can be stored in stacks for easy forklift access. When stored in racks, they require a supporting deck surface.
Protect your hose when it’s not in use.
Turn the handle to rewind the hose.
Designed for areas where space is limited, these reels have the smallest overall size of all our reels.
Reels are enclosed to protect your hose when it's not in use.
Use with lightweight fire-fighting hose (also known as pin-rack hose), which can be folded.
Protect your hose when it's not in use.
Turn the hand crank to rewind your hose.
Wind your garden hose around these reels to keep it neat and organized.
Take your garden hose wherever you need it—this reel has four pneumatic tires for mobility.
Not only do these reels have very good corrosion resistance, they also have more support than medium duty reels, so you can pull the hose out at an angle.
Reels have a frame-style construction that provides extra strength to handle large-diameter hose. They have very good corrosion resistance.
Use these reels in applications where the hose is pulled straight out of the reel. They have good to very good corrosion resistance.
Strong and well-supported to handle large-diameter hose, these reels can be used in high-vibration applications.
These reels have more support than medium duty reels, so you can pull the hose out at an angle.
Use these reels in applications where the hose is pulled straight out of the reel.
Also known as safety reels, these have a retraction speed that's up to 80% slower than other automatic-winding hose reels.
This drum works with drum-top vacuums for 55-gallon open-head drums.
Add a secondary spill-containment system to bring your cabinets into compliance with EPA 40 CFR 264.
Add faucets to oil dispensing stations for increased utility.
The barricade with prismatic bands is high visibility for use in heavy traffic and low-light areas.