Using a low-current signal, these relays are often used to control small motors and heaters.

Save space in your control cabinet. These narrow relays are often used for low-current switching applications, such as on small motors and pilot lights.

Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.

Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals.

Use these relays with industrial automation systems, security and emergency lighting, and small motors.

Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

The interlocked opposing contacts won't close at the same time, so these relays are suitable for safety applications such as machine guarding.

These relays pair the transmission reliability of an interface relay with the fail-safe operation of a safety relay. They have interlocking contacts—also known as force-guided or mechanically linked contacts—so opposing contacts won't close at the same time.

Split run time between two devices—these relays automatically alternate between them.

Suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

Prevent changes in frequency from damaging sensitive equipment.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Switch lighting systems on and off—these relays can handle the high switching current on large overhead light systems.

An enclosure covers the terminals on these relays to help prevent damage from dust or accidental bumps.

Sealed to keep out water, these relays are often used for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

Also known as automotive relays, these relays can handle high starting (inrush) currents.