Using a low-current signal, these relays are often used to control small motors and heaters.

Save space in your control cabinet. These narrow relays are often used for low-current switching applications, such as on small motors and pilot lights.

Isolate input and output circuits to prevent damage from voltage spikes, reduce signal interference, and amplify signal.

The circular pin terminals plug into relay sockets for easy installation.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

For use with equipment that cycles on and off, these relays meet UL 508 for air conditioning and heating. Also known as definite-purpose contactors.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.

Also known as an air-to-electric switch, this relay converts an air signal to an electric signal.

Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.

For fast installation, mount these relays directly to 35 mm DIN rail (also known as DIN 3 rail). With no moving parts, these solid state relays last longer and require less maintenance, are quieter, and switch faster than mechanical relays.

Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Protect components from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission—these relays interface between your controller and system components to isolate the input and output circuits. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.