About Timer Relays
More
DIN-Rail Mount Touch-Safe Screw Terminal Relays
Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.
Relays that control 3 and 4 circuits are built to IEC dimensional standards and are often called IEC contactors. Auxiliary contacts (sold separately) allow you to add a signaling device or control another relay. You can add one auxiliary contact to all of these relays. For relays with 12 terminals, you can add two side-mount auxiliary contacts.
Use replacement coils to swap out a broken coil or change the input voltage of a relay. They are only compatible with relays that have 12 terminals. The full load current of the relay must match the full load current range of the coil.
Control | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage | Current, mA | Switching Current @ Voltage (Load Type) | Max. Switching Voltage | Ht. | Wd. | Dp. | Each | |
4 Circuits Controlled with 4 Off (Normally Open)—4PST-NO | |||||||||
| 10 | 120V AC | 25 | 10 A @ 600 V AC | 600 V AC | 2.3" | 1.7" | 2.2" | 00000000 | 000000 |
| Number of Circuits Controlled | For Relay Width | Switch Starting Position | Industry Designation | Mounting Location | Each | |
| 2 | 1.7" | 1 Off (Normally Open) and 1 On (Normally Closed) | DPST-1NO/1NC | Front | 00000000 | 000000 |
Machine-Guard Relays
The interlocked opposing contacts won't close at the same time, so these relays are suitable for safety applications such as machine guarding. The screw terminals are recessed to prevent accidental contact with live connections. Mount them on 35 mm DIN rail (also known as DIN 3 rail) or flat surfaces. These relays are built to IEC dimensional standards.
Auxiliary contact (sold separately) allows you to add a signaling device or control another relay.
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ 600V AC | Max. Switching Voltage | Ht. | Wd. | Dp. | Each | |
4 Circuits Controlled with 2 Off (Normally Open) and 2 On (Normally Closed)—4PST-2NO/2NC | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 10 | 120V AC | 25 | 10A | 600V AC | 2.3" | 1.7" | 2.2" | 00000000 | 000000 |
4 Circuits Controlled with 3 Off (Normally Open) and 1 On (Normally Closed)—4PST-3NO/1NC | |||||||||
| 10 | 120V AC | 25 | 10A | 600V AC | 2.3" | 1.7" | 2.2" | 00000000 | 00000 |
| Number of Circuits Controlled | Switch Starting Position | Industry Designation | Mounting Location | For Relay Width | Each | |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | DPST-1NO/1NC | Front | 1.7" | 00000000 | 000000 |
Solid State Surface-Mount Timer Relays
Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.
Interval relays use input voltage to turn on for a programmed amount of time. For example, when a part moving down a conveyor reaches a certain location, a cleaning spray comes on for a set time.
For technical drawings and 3-D models, click on a part number.
Timing Range | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage | Control Current, mA | No. of | Overall | Switching Current @ Voltage | Ht. | Wd. | Dp. | Each | |
Interval | ||||||||||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||
| 5 | 120V AC | 25 | 1 | 0.05 sec.-1 sec. | 1 A @ 120 V AC | 2" | 2" | 0.88" | 00000000 | 000000 |
| 5 | 120V AC | 25 | 1 | 3 sec.-60 sec. | 1 A @ 120 V AC | 2" | 2" | 0.88" | 00000000 | 00000 |
| 5 | 120V AC | 25 | 1 | 30 sec.-10 min. | 1 A @ 120 V AC | 2" | 2" | 0.88" | 00000000 | 00000 |