Using a low-current signal, these relays are often used to control small motors and heaters.

Save space in your control cabinet. These narrow relays are often used for low-current switching applications, such as on small motors and pilot lights.

Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.

Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals.

Use the screw terminals to hardwire these relays.

These relays handle the high starting (inrush) currents that often occur when turning on a vehicle.

Sealed to keep out water, these relays are often used for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

The interlocked opposing contacts won't close at the same time, so these relays are suitable for safety applications such as machine guarding.

These relays pair the transmission reliability of an interface relay with the fail-safe operation of a safety relay. They have interlocking contacts—also known as force-guided or mechanically linked contacts—so opposing contacts won't close at the same time.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion.

An enclosure covers the terminals on these relays to help prevent damage from dust or accidental bumps.

Split run time between two devices—these relays automatically alternate between them.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Safeguard your equipment against overheating, wear, and malfunction from a spike or dip in voltage.

Monitor phase, voltage, and frequency at the same time to protect motors, generators, and other three-phase circuits from burning out or overheating.

With a built-in web server, these relays can be remotely controlled over any IP network, including the Internet.

Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size.

Control two steps of an electrical process from a single relay—with two fully independent channels and 30 different functions, these relays give you a wide range of possibilities.

Protect components from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission—these relays interface between your controller and system components to isolate the input and output circuits. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Use the mounting holes to attach monitors to a flat surface.