DIN-Rail Mount Touch-Safe Screw Terminal Relays
Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.
Relays that control 3 and 4 circuits are built to IEC dimensional standards and are often called IEC contactors. Those with 12 terminals let you attach the control circuit onto the side that works best for your setup, which reduces the amount of wire you need.
Auxiliary contacts (sold separately) allow you to add a signaling device or control another relay. You can add one auxiliary contact to all of these relays. For relays with 12 terminals, you can add two side-mount auxiliary contacts.
Use replacement coils to swap out a broken coil or change the input voltage of a relay. They are only compatible with relays that have 12 terminals. The full load current of the relay must match the full load current range of the coil.
For technical drawings and 3-D models, click on a part number.
Control | hp @ Switching Voltage | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage  | Power | Switching Current @ Voltage (Load Type) | Max. Switching Voltage | Single Phase | Three Phase | Ht. | Wd. | Dp. | Each | |
4 Circuits Controlled with 4 Off (Normally Open)—4PST-NO | |||||||||||
| 12 | 24V AC | 6.5VA | 22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load) | 600 V AC | 2 hp @ 120 V AC 5 hp @ 240 V AC | 7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC | 3.5" | 2.4" | 3.5" | 000000000 | 0000000 |
| 12 | 120V AC | 6.5VA | 22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load) | 600 V AC | 2 hp @ 120 V AC 5 hp @ 240 V AC | 7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC | 3.5" | 2.4" | 3.5" | 000000000 | 000000 |
| 12 | 240V AC | 6.5VA | 22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load) | 600 V AC | 2 hp @ 120 V AC 5 hp @ 240 V AC | 7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC | 3.5" | 2.4" | 3.5" | 000000000 | 000000 |
| 12 | 24V DC | 5.4W | 22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load) | 600 V AC | 2 hp @ 120 V AC 5 hp @ 240 V AC | 7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC | 3.5" | 2.4" | 4.2" | 00000000 | 000000 |
| Number of Circuits Controlled | For Relay Width | Switch Starting Position | Industry Designation | Mounting Location | Each | |
| 2 | 1.8", 2.4" | 1 Off (Normally Open) and 1 On (Normally Closed) | DPST-1NO/1NC | Front | 00000000 | 000000 |
| 2 | 1.8", 2.4" | 1 Off (Normally Open) and 1 On (Normally Closed) | DPST-1NO/1NC | Side | 00000000 | 00000 |
| 2 | 1.8", 2.4" | 2 Off (Normally Open) | DPST-NO | Front | 0000000 | 00000 |
| 2 | 1.8", 2.4" | 2 On (Normally Closed) | DPST-NC | Front | 0000000 | 00000 |
| 4 | 1.8", 2.4" | 1 Off (Normally Open) and 3 On (Normally Closed) | 4PST-1NO/3NC | Front | 0000000 | 00000 |
| 4 | 1.8", 2.4" | 2 Off (Normally Open) and 2 On (Normally Closed) | 4PST-2NO/2NC | Front | 0000000 | 00000 |
| 4 | 1.8", 2.4" | 3 Off (Normally Open) and 1 On (Normally Closed) | 4PST-3NO/1NC | Front | 0000000 | 00000 |
| 4 | 1.8", 2.4" | 4 Off (Normally Open) | 4PST-NO | Front | 0000000 | 00000 |
| 4 | 1.8", 2.4" | 4 On (Normally Closed) | 4PST-NC | Front | 0000000 | 00000 |
