We will reply to your message within an hour.
Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.
Use these links for general lifting applications.
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.
Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.
The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.
The wide end of these links has more room for attachments than standard figure-eight links.
Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.
Once secured with the included locking pin, these links must be cut off to be removed.
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.
For a more secure hold than standard hoist rings, weld these hoist rings to your load.
The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.
Choose these hoist rings when you need to lift your load from the side.
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended.
With three different thread sizes, these hoist rings are useful when you need to lift different types of equipment.
Remove the shackle after lifting while keeping the base installed for future use.
Keep on hand all the parts needed to assemble custom hoist rings.
Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads.
An indicator dot changes from red to black when these hoist rings are properly tightened, eliminating the need for a torque wrench.
Also known as machinery eyebolts.
Also known as nut eyebolts, these are designed for through-hole applications.
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
The matte black-oxide finish won't reflect light, allowing the eyebolts to blend into the background.
Route wire and cable through the smooth eye without snagging.
These eyebolts retain their strength in temperatures as low as -40° F.
Create your own lifting eye by adding an eye nut to a stud or bolt.
Weld these stubs to parts or use them to push objects apart instead of pulling them together.