Use these grinders for occasional light grinding, deburring, and finishing.

More durable than our Light Duty Grinders, these are designed for more frequent use.

Convert your straight grinder into an angle grinder.

The threaded spindles on these grinders accept raised-hub grinding wheels.

Use these grinders for light, intermittent grinding and sanding.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

The saucer shape lets you hold these wheels at shallower angles than Type 27 wheels, so they’re more comfortable to handle. They are also known as Type 28 wheels and raised-hub wheels.

Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

These pads are designed to channel air flow to the sanding disc for cooler operation, prolonging the life of the disc.

Holes in the pad align with holes in the sanding disc for a clearer view of the sanding surface.