Right-Hand Threaded Finished Full Hex Nuts

Filter by

System of Measurement

Thread Size

Material

Hex Nut Profile

Fastener Strength Grade/Class

Width

Thread Pitch

Height

Finish

Cadmium Yellow-Chromate Plated

Corrosion-Resistant Coated

Dyed

Hot-Dipped Galvanized

Zinc Yellow-Chromate Plated

Thread Type

Thread Spacing

Specifications Met

Federal Specification

Performance

Thread Fit

Unified Standard Class 2B

Fastener Strength Rating

Low

Medium

High

DFARS Specialty Metals

Color

REACH

RoHS

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

2B999

EAR99

Military Specification

Maximum Temperature

Certificate Type

Material Certificate with Traceable Lot Number

Material Certificate with Traceable Lot Number and Test Report

Minimum Temperature

Number of Pieces

Container Features

1,335 Products

About Hex Nuts

Choose a hex nut with the right profile, material, and strength for your application.

Hex Nut Profile

Standard

The most common hex nuts for fastening machinery and equipment

1,330 products

Heavy

Wider and taller than standard nuts to handle heavier loads

3 products

Hex Nut Profile

Narrow

20% narrower than other nuts to fit in cramped spaces

2 products

Performance

Corrosion Resistant

Won't rust in wet and outdoor environments

522 products

Hex Nuts

The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.

Medium-Strength Steel

Image of Product. Front orientation. Hex Nuts. Hex Nuts.

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Black Corrosion-Resistant-Coated Steel—Combines a finished appearance with the rust resistance of stainless steel. The coating has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. Also known as black luster.

Zinc-Flake-Coated Steel—The best zinc coating for long-term wear and rust resistance. This multilayer finish is tested to withstand at least 720 hours of salt spray. That's about five times the corrosion resistance of standard zinc plating. Like zinc yellow chromate, however, it doesn't hold up to harsh chemicals as well as stainless steel. These nuts are also embedded with lubricant for easy installation.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		1/4"-20	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	000000000	00000


		1/4"-28	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
		5/16"-18	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
		5/16"-24	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		3/8"-16	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
		3/8"-24	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		7/16"-14	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		7/16"-20	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		1/2"-13	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		1/2"-20	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
		9/16"-12	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	50	000000000	00000


		9/16"-18	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
		5/8"-11	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
		5/8"-18	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
		7/8"-9	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		1"-8	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		1"-12	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		1"-14	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	10	000000000	00000


		1 1/8"-7	1 11/16"	31/32"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		1 1/8"-12	1 11/16"	31/32"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		2"-4 1/2	3"	1 23/32"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
		2"-12	3"	1 23/32"	SAE Grade 5	ASME B18.2.2	1	000000000	00000


		M2 × 0.4 mm	4 mm	1.6 mm	ISO Class 8	DIN 934	100	000000000	0000
		M2.5 × 0.45 mm	5 mm	2 mm	ISO Class 8	DIN 934	100	000000000	0000
		M3 × 0.5 mm	5.5 mm	2.4 mm	ISO Class 8	DIN 934	100	000000000	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	ISO Class 8	DIN 934	100	000000000	0000
		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 8	DIN 934	100	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 8	DIN 934	100	000000000	0000
		M6 × 0.75 mm	10 mm	5 mm	ISO Class 8	DIN 934	50	000000000	00000
		M6 × 1 mm	10 mm	5 mm	ISO Class 8	DIN 934	100	000000000	0000
		M7 × 1 mm	11 mm	5.5 mm	ISO Class 8	DIN 934	100	000000000	0000
		M8 × 1 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	100	000000000	00000


		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	100	000000000	0000
		M10 × 1 mm	17 mm	8 mm	ISO Class 8	DIN 934	50	000000000	00000
		M10 × 1.25 mm	17 mm	8 mm	ISO Class 8	DIN 934	50	000000000	00000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 8	DIN 934	100	000000000	00000
		M12 × 1 mm	19 mm	10 mm	ISO Class 8	DIN 934	10	000000000	00000
		M12 × 1.25 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	00000
		M12 × 1.5 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	00000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 8	DIN 934	50	000000000	00000
		M14 × 1.5 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	000000000	00000
		M14 × 2 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	000000000	0000

M16 × 1.5 mm	24 mm	13 mm	ISO Class 8	DIN 934	20	000000000	00000
M16 × 2 mm	24 mm	13 mm	ISO Class 8	DIN 934	25	000000000	00000
M18 × 1.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	10	000000000	00000
M18 × 2.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	10	000000000	0000
M20 × 1.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	10	000000000	00000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	10	000000000	0000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 2 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	10	000000000	00000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 3 mm	36 mm	19 mm	ISO Class 8	DIN 934	10	000000000	00000
M27 × 2 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	00000
M27 × 3 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	0000
M30 × 2 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	000000000	0000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	000000000	0000
M33 × 3.5 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	000000000	0000
M36 × 3 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	000000000	00000
M36 × 4 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	000000000	0000
M39 × 4 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	000000000	0000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	000000000	0000
M48 × 5 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	000000000	00000

Zinc-Yellow-Chromate-Plated Steel



		M3 × 0.5 mm	5.5 mm	2.4 mm	ISO Class 8	DIN 934	100	000000000	0000


		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 8	DIN 934	100	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 8	DIN 934	100	000000000	0000
		M6 × 0.75 mm	10 mm	5 mm	ISO Class 8	DIN 934	50	000000000	0000
		M6 × 1 mm	10 mm	5 mm	ISO Class 8	DIN 934	100	000000000	0000
		M7 × 1 mm	11 mm	5.5 mm	ISO Class 8	DIN 934	100	000000000	0000
		M8 × 1 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	50	000000000	0000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	50	000000000	0000
		M10 × 1 mm	17 mm	8 mm	ISO Class 8	DIN 934	25	000000000	0000
		M10 × 1.25 mm	17 mm	8 mm	ISO Class 8	DIN 934	50	000000000	00000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 8	DIN 934	25	000000000	0000


		M12 × 1 mm	19 mm	10 mm	ISO Class 8	DIN 934	10	000000000	0000
		M12 × 1.25 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	00000
		M12 × 1.5 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	00000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	0000
		M14 × 1.5 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	000000000	00000
		M14 × 2 mm	22 mm	11 mm	ISO Class 8	DIN 934	10	000000000	0000
		M16 × 1.5 mm	24 mm	13 mm	ISO Class 8	DIN 934	10	000000000	0000
		M16 × 2 mm	24 mm	13 mm	ISO Class 8	DIN 934	10	000000000	0000
		M18 × 1.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	5	000000000	0000
		M18 × 2.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	5	000000000	0000


		M20 × 1.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	5	000000000	0000
		M20 × 2.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	5	000000000	0000
		M22 × 1.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
		M22 × 2.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	5	000000000	0000
		M24 × 1.5 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
		M24 × 2 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
		M24 × 3 mm	36 mm	19 mm	ISO Class 8	DIN 934	5	000000000	0000
		M27 × 3 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	0000
		M30 × 3.5 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	000000000	0000
		M36 × 4 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	000000000	00000


		M48 × 5 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	000000000	00000


		Black-Oxide Steel



				1/4"-20	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	50	000000000	0000


				1/4"-28	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	50	000000000	00000
				5/16"-18	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	50	000000000	0000
				5/16"-24	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	50	000000000	00000
				3/8"-16	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	50	000000000	0000
				3/8"-24	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
				7/16"-14	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	25	000000000	0000
				7/16"-20	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	25	000000000	0000
				1/2"-13	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
				1/2"-20	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	10	000000000	0000
				9/16"-12	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	10	000000000	0000


9/16"-18				7/8"	1/2"	SAE Grade 5	ASME B18.2.2	25	000000000	0000
5/8"-11	15/16"			35/64"	SAE Grade 5	ASME B18.2.2	10	000000000	0000
5/8"-18	15/16"			35/64"	SAE Grade 5	ASME B18.2.2	10	000000000	0000
3/4"-10	1 1/8"			41/64"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
3/4"-16	1 1/8"			41/64"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
7/8"-9	1 5/16"			3/4"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
7/8"-14	1 5/16"			3/4"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
1"-8	1 1/2"			55/64"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
1"-14	1 1/2"			7/8"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
1 1/8"-7	1 11/16"			31/32"	SAE Grade 5	ASME B18.2.2	1	000000000	0000


1 1/8"-12	1 11/16"			1"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
1 1/4"-7	1 7/8"			1 1/16"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 1/4"-12	1 7/8"			1 1/16"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
1 3/8"-6	2 1/16"			1 3/16"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 3/8"-12	2 1/16"			1 3/16"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
1 1/2"-6	2 1/4"			1 5/16"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
1 1/2"-12	2 1/4"			1 5/16"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
M2 × 0.4 mm	4 mm			1.6 mm	ISO Class 8	DIN 934	50	000000000	0000
M2.5 × 0.45 mm	5 mm			2 mm	ISO Class 8	DIN 934	50	000000000	0000
M3 × 0.5 mm	5.5 mm			2.4 mm	ISO Class 8	DIN 934	100	000000000	00000


M3.5 × 0.6 mm	6 mm			2.8 mm	ISO Class 8	DIN 934	50	000000000	0000
M4 × 0.7 mm	7 mm			3.2 mm	ISO Class 8	DIN 934	100	000000000	00000
M5 × 0.8 mm	8 mm			4 mm	ISO Class 8	DIN 934	100	000000000	00000
M6 × 1 mm	10 mm			5 mm	ISO Class 8	DIN 934	50	000000000	00000
M7 × 1 mm	11 mm			5.5 mm	ISO Class 8	DIN 934	25	000000000	0000
M8 × 1 mm	13 mm			6.5 mm	ISO Class 8	DIN 934	25	000000000	00000
M8 × 1.25 mm	13 mm			6.5 mm	ISO Class 8	DIN 934	50	000000000	00000
M10 × 1 mm	17 mm			8 mm	ISO Class 8	DIN 934	25	000000000	00000
M10 × 1.25 mm	17 mm			8 mm	ISO Class 8	DIN 934	25	000000000	00000
M10 × 1.5 mm	17 mm			8 mm	ISO Class 8	DIN 934	25	000000000	0000


M12 × 1.25 mm	19 mm			10 mm	ISO Class 8	DIN 934	10	000000000	0000
M12 × 1.5 mm	19 mm			10 mm	ISO Class 8	DIN 934	10	000000000	0000
M12 × 1.75 mm	19 mm			10 mm	ISO Class 8	DIN 934	25	000000000	0000
M14 × 1.25 mm	22 mm			11 mm	ISO Class 8	DIN 934	10	000000000	00000
M14 × 1.5 mm	22 mm			11 mm	ISO Class 8	DIN 934	10	000000000	00000
M14 × 2 mm	22 mm			11 mm	ISO Class 8	DIN 934	5	000000000	0000
M16 × 1.5 mm	24 mm			13 mm	ISO Class 8	DIN 934	10	000000000	00000
M16 × 2 mm	24 mm			13 mm	ISO Class 8	DIN 934	5	000000000	00000
M18 × 1.5 mm	27 mm			15 mm	ISO Class 8	DIN 934	10	000000000	00000
M18 × 2.5 mm	27 mm			15 mm	ISO Class 8	DIN 934	1	000000000	0000

M20 × 1.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	5	000000000	00000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 3 mm	36 mm	19 mm	ISO Class 8	DIN 934	5	000000000	00000
M27 × 3 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	00000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	000000000	00000
M33 × 3.5 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	000000000	00000
M36 × 4 mm	60 mm	29 mm	ISO Class 8	DIN 934	1	000000000	00000
M39 × 4 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	000000000	00000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	000000000	00000
M45 × 4.5 mm	70 mm	36 mm	ISO Class 8	DIN 934	1	000000000	00000
M48 × 5 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	000000000	00000

Black Corrosion-Resistant-Coated Steel



		1/4"-20	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	10	000000000	0000


		5/16"-18	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
		3/8"-16	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
		7/16"-14	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
		1/2"-13	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
		9/16"-12	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
		5/8"-11	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		3/4"-10	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
		M6 × 1 mm	10 mm	5 mm	ISO Class 8	DIN 934	10	000000000	0000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	10	000000000	00000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 8	DIN 934	10	000000000	00000


		M12 × 1.75 mm	19 mm	10 mm	ISO Class 8	DIN 934	5	000000000	0000


		Zinc-Flake-Coated Steel



				M6 × 1 mm	10 mm	5 mm	ISO Class 8	DIN 934	100	000000000	0000


				M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	50	000000000	0000
				M10 × 1.5 mm	17 mm	8 mm	ISO Class 8	DIN 934	25	000000000	00000
				M12 × 1.75 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	000000000	00000


				Steel



						1/4"-20	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	000000000	0000


						1/4"-28	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
						5/16"-18	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
						5/16"-24	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
						3/8"-16	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
						3/8"-24	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	000000000	0000
						7/16"-14	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
						7/16"-20	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	000000000	00000
						1/2"-13	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	50	000000000	00000
						1/2"-20	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	50	000000000	00000
						9/16"-12	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000


						9/16"-18	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	25	000000000	0000
						5/8"-11	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
						5/8"-18	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
						3/4"-10	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
						3/4"-16	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	000000000	00000
						7/8"-9	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
						7/8"-14	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	000000000	00000
						1"-8	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
						1"-12	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
						1"-14	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	5	000000000	0000


1 1/8"-7						1 11/16"	31/32"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
1 1/8"-12	1 11/16"					31/32"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
1 1/4"-7	1 7/8"					1 1/16"	SAE Grade 5	ASME B18.2.2	5	000000000	0000
1 1/4"-12	1 7/8"					1 1/16"	SAE Grade 5	ASME B18.2.2	5	000000000	00000
1 3/8"-6	2 1/16"					1 11/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 3/8"-12	2 1/16"					1 11/64"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 1/2"-6	2 1/4"					1 9/32"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 1/2"-12	2 1/4"					1 9/32"	SAE Grade 5	ASME B18.2.2	1	000000000	0000
1 3/4"-5	2 5/8"					1 1/2"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
1 3/4"-12	2 5/8"					1 1/2"	SAE Grade 5	ASME B18.2.2	1	000000000	00000


2"-4 1/2	3"					1 23/32"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
2"-12	3"					1 23/32"	SAE Grade 5	ASME B18.2.2	1	000000000	00000
M2 × 0.4 mm	4 mm					1.6 mm	ISO Class 8	DIN 934	100	000000000	0000
M2.5 × 0.45 mm	5 mm					2 mm	ISO Class 8	DIN 934	100	000000000	0000
M3 × 0.5 mm	5.5 mm					2.4 mm	ISO Class 8	DIN 934	100	000000000	0000
M3.5 × 0.6 mm	6 mm					2.8 mm	ISO Class 8	DIN 934	100	000000000	0000
M4 × 0.7 mm	7 mm					3.2 mm	ISO Class 8	DIN 934	100	000000000	0000
M5 × 0.8 mm	8 mm					4 mm	ISO Class 8	DIN 934	100	000000000	0000
M6 × 0.75 mm	10 mm					5 mm	ISO Class 8	DIN 934	100	000000000	00000
M6 × 1 mm	10 mm					5 mm	ISO Class 8	DIN 934	100	000000000	0000


M7 × 1 mm	11 mm	5.5 mm	ISO Class 8			DIN 934	100	000000000	0000
M8 × 1 mm	13 mm	6.5 mm	ISO Class 8			DIN 934	100	000000000	00000
M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8			DIN 934	100	000000000	0000
M10 × 1 mm	17 mm	8 mm	ISO Class 8			DIN 934	50	000000000	00000
M10 × 1.25 mm	17 mm	8 mm	ISO Class 8			DIN 934	50	000000000	00000
M10 × 1.5 mm	17 mm	8 mm	ISO Class 8			DIN 934	100	000000000	00000
M12 × 1 mm	19 mm	10 mm	ISO Class 8			DIN 934	10	000000000	00000
M12 × 1.25 mm	19 mm	10 mm	ISO Class 8			DIN 934	25	000000000	00000
M12 × 1.5 mm	19 mm	10 mm	ISO Class 8			DIN 934	25	000000000	00000
M12 × 1.75 mm	19 mm	10 mm	ISO Class 8			DIN 934	100	000000000	00000

M14 × 1.25 mm	22 mm	11 mm	ISO Class 8	DIN 934	5	000000000	00000
M14 × 1.5 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	000000000	00000
M14 × 2 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	000000000	0000
M16 × 1.5 mm	24 mm	13 mm	ISO Class 8	DIN 934	20	000000000	00000
M16 × 2 mm	24 mm	13 mm	ISO Class 8	DIN 934	25	000000000	00000
M18 × 1.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	10	000000000	00000
M18 × 2.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	25	000000000	00000
M20 × 1.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	5	000000000	0000
M20 × 2 mm	30 mm	16 mm	ISO Class 8	DIN 934	1	000000000	0000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	10	000000000	0000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 2 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	10	000000000	0000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	000000000	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 8	DIN 934	5	000000000	00000
M24 × 3 mm	36 mm	19 mm	ISO Class 8	DIN 934	10	000000000	00000
M27 × 1.5 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	00000
M27 × 2 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	0000
M27 × 3 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	000000000	0000
M30 × 2 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	000000000	0000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 8	DIN 934	5	000000000	00000
M33 × 2 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	000000000	00000
M33 × 3 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	000000000	0000
M33 × 3.5 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	000000000	0000
M36 × 3 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	000000000	0000
M36 × 4 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	000000000	0000
M39 × 2 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	000000000	00000
M39 × 3 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	000000000	00000
M39 × 4 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	000000000	0000
M42 × 3 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	000000000	00000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	000000000	0000
M45 × 3 mm	70 mm	36 mm	ISO Class 8	DIN 934	1	000000000	00000
M45 × 4.5 mm	70 mm	36 mm	ISO Class 8	DIN 934	1	000000000	00000
M48 × 3 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	000000000	00000
M48 × 5 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	000000000	00000
M52 × 3 mm	80 mm	42 mm	ISO Class 8	DIN 934	1	000000000	00000
M56 × 3 mm	85 mm	45 mm	ISO Class 8	DIN 934	1	000000000	00000
M56 × 4 mm	85 mm	45 mm	ISO Class 8	DIN 934	1	000000000	00000
M60 × 4 mm	90 mm	48 mm	ISO Class 8	DIN 934	1	000000000	00000
M72 × 4 mm	105 mm	58 mm	ISO Class 8	DIN 934	1	000000000	000000

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Zinc-Flake-Coated Steel—The most durable zinc coating, zinc flake is a multilayer finish that resists wear for long-term rust protection. Similar to zinc yellow-chromate, it won't hold up to harsh chemicals like stainless steel can.

Steel—Best for dry environments since moisture will cause these nuts to rust.

Blue Dyed Steel—These metric-sized nuts have a distinctive blue color, so you can easily tell them apart from inch nuts.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M3 × 0.5 mm	5.5 mm	2.4 mm	ISO Class 10	DIN 934	100	000000000	00000


		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 10	DIN 934	100	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 10	DIN 934	100	000000000	0000
		M6 × 1 mm	10 mm	5.2 mm	ISO Class 10	DIN 934	100	000000000	00000
		M8 × 1 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	25	00000000	00000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	50	000000000	0000
		M10 × 1 mm	17 mm	8 mm	ISO Class 10	DIN 934	10	00000000	0000
		M10 × 1.25 mm	17 mm	8 mm	ISO Class 10	DIN 934	10	00000000	0000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 10	DIN 934	25	000000000	0000
		M12 × 1 mm	19 mm	10 mm	ISO Class 10	DIN 934	5	00000000	0000
		M12 × 1.25 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	00000000	0000


		M12 × 1.5 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	00000000	00000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 10	DIN 934	25	000000000	00000
		M14 × 1.5 mm	22 mm	11 mm	ISO Class 10	DIN 934	10	00000000	00000
		M14 × 2 mm	22 mm	11 mm	ISO Class 10	DIN 934	10	000000000	0000
		M16 × 1.5 mm	24 mm	13 mm	ISO Class 10	DIN 934	5	00000000	0000
		M16 × 2 mm	24 mm	13 mm	ISO Class 10	DIN 934	10	000000000	0000
		M18 × 1.5 mm	27 mm	15 mm	ISO Class 10	DIN 934	5	00000000	00000
		M18 × 2.5 mm	27 mm	15 mm	ISO Class 10	DIN 934	5	000000000	00000
		M20 × 1.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	5	0000000	0000
		M20 × 2 mm	30 mm	16 mm	ISO Class 10	DIN 934	1	00000000	0000


		M20 × 2.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	5	000000000	00000
		M22 × 1.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	00000000	0000
		M22 × 2.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	000000000	0000
		M24 × 1.5 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	00000000	0000
		M24 × 2 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	00000000	0000
		M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	0000
		M27 × 2 mm	41 mm	22 mm	ISO Class 10	DIN 934	1	00000000	0000
		M27 × 3 mm	41 mm	22 mm	ISO Class 10	DIN 934	1	000000000	0000
		M30 × 1.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	00000000	0000
		M30 × 2 mm	49 mm	24 mm	ISO Class 10	DIN 934	1	00000000	0000


		M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	0000
		M42 × 4.5 mm	65 mm	34 mm	ISO Class 10	DIN 934	1	000000000	00000


		Zinc-Yellow-Chromate-Plated Steel



				1/4"-20	7/16"	7/32"	SAE Grade 8	—	100	000000000	0000


				1/4"-28	7/16"	7/32"	SAE Grade 8	—	100	000000000	0000
				5/16"-18	1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
				5/16"-24	1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
				3/8"-16	9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
				3/8"-24	9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
				7/16"-14	11/16"	3/8"	SAE Grade 8	—	50	000000000	00000
				7/16"-20	11/16"	3/8"	SAE Grade 8	—	50	000000000	0000
				1/2"-13	3/4"	7/16"	SAE Grade 8	—	50	000000000	0000
				1/2"-20	3/4"	7/16"	SAE Grade 8	—	50	000000000	00000
				9/16"-12	7/8"	31/64"	SAE Grade 8	—	25	000000000	00000


9/16"-18	7/8"			31/64"	SAE Grade 8	—	25	000000000	00000
5/8"-11	15/16"			35/64"	SAE Grade 8	—	25	000000000	00000
5/8"-18	15/16"			35/64"	SAE Grade 8	—	25	000000000	00000
3/4"-10	1 1/8"			41/64"	SAE Grade 8	—	20	000000000	00000
3/4"-16	1 1/8"			41/64"	SAE Grade 8	—	10	000000000	00000
7/8"-9	1 5/16"			3/4"	SAE Grade 8	—	10	000000000	00000
1"-8	1 1/2"			55/64"	SAE Grade 8	—	10	000000000	00000
1"-12	1 1/2"			55/64"	SAE Grade 8	—	1	000000000	0000
1"-14	1 1/2"			55/64"	SAE Grade 8	—	10	000000000	00000
1 1/8"-7	1 11/16"			31/32"	SAE Grade 8	—	5	000000000	00000


1 1/8"-12	1 11/16"			31/32"	SAE Grade 8	—	5	000000000	00000
1 1/4"-7	1 7/8"			1 1/16"	SAE Grade 8	—	5	000000000	00000
1 1/4"-12	1 7/8"			1 1/16"	SAE Grade 8	—	1	000000000	0000
1 3/8"-6	2 1/16"			1 11/64"	SAE Grade 8	—	1	000000000	0000
1 3/8"-12	2 1/16"			1 11/64"	SAE Grade 8	—	1	000000000	0000
1 1/2"-6	2 1/4"			1 9/32"	SAE Grade 8	—	1	000000000	0000
1 3/4"-5	2 5/8"			1 1/2"	SAE Grade 8	—	1	000000000	00000
1 3/4"-12	2 5/8"			1 1/2"	SAE Grade 8	—	1	000000000	00000
2"-4 1/2	3"			1 23/32"	SAE Grade 8	—	1	000000000	00000
2"-12	3"			1 23/32"	SAE Grade 8	—	1	000000000	00000


M3 × 0.5 mm	5.5 mm			2.4 mm	ISO Class 10	DIN 934	25	000000000	00000
M4 × 0.7 mm	7 mm			3.2 mm	ISO Class 10	DIN 934	50	000000000	00000
M5 × 0.8 mm	8 mm			4 mm	ISO Class 10	DIN 934	100	000000000	00000
M6 × 1 mm	10 mm			5 mm	ISO Class 10	DIN 934	100	000000000	00000
M8 × 1 mm	13 mm			6.5 mm	ISO Class 10	DIN 934	10	000000000	0000
M8 × 1.25 mm	13 mm			6.5 mm	ISO Class 10	DIN 934	100	000000000	00000
M10 × 1 mm	17 mm			8 mm	ISO Class 10	DIN 934	5	000000000	0000
M10 × 1.25 mm	17 mm			8 mm	ISO Class 10	DIN 934	5	000000000	0000
M10 × 1.5 mm	17 mm			8 mm	ISO Class 10	DIN 934	50	000000000	00000
M12 × 1.25 mm	19 mm			10 mm	ISO Class 10	DIN 934	5	000000000	0000


M12 × 1.5 mm	19 mm			10 mm	ISO Class 10	DIN 934	5	000000000	00000
M12 × 1.75 mm	19 mm			10 mm	ISO Class 10	DIN 934	25	000000000	00000
M14 × 1.5 mm	22 mm			11 mm	ISO Class 10	DIN 934	5	000000000	00000
M14 × 2 mm	22 mm			11 mm	ISO Class 10	DIN 934	10	000000000	00000
M16 × 1.5 mm	24 mm			13 mm	ISO Class 10	DIN 934	1	000000000	0000
M16 × 2 mm	24 mm			13 mm	ISO Class 10	DIN 934	10	000000000	00000
M18 × 1.5 mm	27 mm			15 mm	ISO Class 10	DIN 934	1	000000000	0000
M18 × 2.5 mm	27 mm			15 mm	ISO Class 10	DIN 934	5	000000000	00000
M20 × 1.5 mm	30 mm			16 mm	ISO Class 10	DIN 934	1	000000000	0000
M20 × 2.5 mm	30 mm			16 mm	ISO Class 10	DIN 934	5	000000000	00000

M22 × 1.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	000000000	0000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	00000
M24 × 2 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	00000
M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	0000
M30 × 1.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	00000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	0000
M36 × 4 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	000000000	00000

Black-Oxide Steel



		1/4"-20	7/16"	7/32"	SAE Grade 8	—	100	000000000	0000


		1/4"-28	7/16"	7/32"	SAE Grade 8	—	100	000000000	0000
		5/16"-18	1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
		5/16"-24	1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
		3/8"-16	9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
		3/8"-24	9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
		7/16"-14	11/16"	3/8"	SAE Grade 8	—	50	000000000	00000
		7/16"-20	11/16"	3/8"	SAE Grade 8	—	50	000000000	00000
		1/2"-13	3/4"	7/16"	SAE Grade 8	—	50	000000000	00000
		1/2"-20	3/4"	7/16"	SAE Grade 8	—	50	000000000	00000
		9/16"-12	7/8"	31/64"	SAE Grade 8	—	25	000000000	00000


		9/16"-18	7/8"	31/64"	SAE Grade 8	—	25	000000000	00000
		5/8"-11	15/16"	35/64"	SAE Grade 8	—	25	000000000	00000
		5/8"-18	15/16"	35/64"	SAE Grade 8	—	25	000000000	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 8	—	20	000000000	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 8	—	20	000000000	00000
		7/8"-9	1 5/16"	3/4"	SAE Grade 8	—	10	000000000	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 8	—	10	000000000	00000
		1"-8	1 1/2"	55/64"	SAE Grade 8	—	10	000000000	00000
		1"-14	1 1/2"	55/64"	SAE Grade 8	—	10	000000000	00000
		1 1/8"-7	1 11/16"	31/32"	SAE Grade 8	—	5	000000000	00000


		1 1/8"-12	1 11/16"	31/32"	SAE Grade 8	—	5	000000000	00000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 8	—	5	000000000	00000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 8	—	5	000000000	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 8	—	1	000000000	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 8	—	1	000000000	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 8	—	1	000000000	00000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 8	—	1	000000000	00000
		1 3/4"-5	2 5/8"	1 1/2"	SAE Grade 8	—	1	000000000	00000
		1 3/4"-12	2 5/8"	1 1/2"	SAE Grade 8	—	1	000000000	00000
		2"-4 1/2	3"	1 23/32"	SAE Grade 8	—	1	000000000	00000


		2"-12	3"	1 23/32"	SAE Grade 8	—	1	000000000	00000
		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 10	DIN 934	100	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 10	DIN 934	50	000000000	0000
		M6 × 1 mm	10 mm	5 mm	ISO Class 10	DIN 934	50	000000000	0000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	25	000000000	0000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 10	DIN 934	10	000000000	0000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	000000000	0000
		M14 × 2 mm	22 mm	11 mm	ISO Class 10	DIN 934	5	000000000	00000
		M16 × 2 mm	24 mm	13 mm	ISO Class 10	DIN 934	5	000000000	00000
		M20 × 2.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	1	000000000	0000


		M22 × 2.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	000000000	0000
		M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	0000
		M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	00000


		Black Corrosion-Resistant-Coated Steel



				1/4"-20	7/16"	7/32"	SAE Grade 8	ASME B18.2.2	10	000000000	00000


5/16"-18	1/2"			17/64"	SAE Grade 8	ASME B18.2.2	10	000000000	00000
3/8"-16	9/16"			21/64"	SAE Grade 8	ASME B18.2.2	5	000000000	0000
1/2"-13	3/4"			7/16"	SAE Grade 8	ASME B18.2.2	5	000000000	00000
M6 × 1 mm	10 mm			5 mm	ISO Class 10	DIN 934	10	000000000	00000
M8 × 1.25 mm	13 mm			6.5 mm	ISO Class 10	DIN 934	10	000000000	00000
M10 × 1.5 mm	17 mm			8 mm	ISO Class 10	DIN 934	10	000000000	00000
M12 × 1.75 mm	19 mm			10 mm	ISO Class 10	DIN 934	5	000000000	0000


Zinc-Flake-Coated Steel



				1/4"-20	7/16"	7/32"	SAE Grade 8	—	100	000000000	00000


				1/4"-28	7/16"	7/32"	SAE Grade 8	—	100	000000000	0000
				5/16"-18	1/2"	17/64"	SAE Grade 8	—	100	000000000	00000
				5/16"-24	1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
				3/8"-16	9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
				3/8"-24	9/16"	21/64"	SAE Grade 8	—	50	000000000	00000
				7/16"-14	11/16"	3/8"	SAE Grade 8	—	50	000000000	00000
				7/16"-20	11/16"	3/8"	SAE Grade 8	—	25	000000000	0000
				1/2"-13	3/4"	7/16"	SAE Grade 8	—	25	000000000	00000
				1/2"-20	3/4"	7/16"	SAE Grade 8	—	25	000000000	00000
				9/16"-12	7/8"	31/64"	SAE Grade 8	—	25	000000000	00000


				9/16"-18	7/8"	31/64"	SAE Grade 8	—	10	000000000	0000
				5/8"-11	15/16"	35/64"	SAE Grade 8	—	10	000000000	00000
				5/8"-18	15/16"	35/64"	SAE Grade 8	—	10	000000000	0000
				3/4"-10	1 1/8"	41/64"	SAE Grade 8	—	10	000000000	00000
				3/4"-16	1 1/8"	41/64"	SAE Grade 8	—	10	000000000	00000
				7/8"-9	1 5/16"	3/4"	SAE Grade 8	—	10	000000000	00000
				7/8"-14	1 5/16"	3/4"	SAE Grade 8	—	10	000000000	00000
				1"-8	1 1/2"	55/64"	SAE Grade 8	—	5	000000000	00000
				1"-14	1 1/2"	55/64"	SAE Grade 8	—	5	000000000	00000
				1 1/8"-7	1 11/16"	31/32"	SAE Grade 8	—	1	000000000	0000


				1 1/8"-12	1 11/16"	31/32"	SAE Grade 8	—	1	000000000	0000
				1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 8	—	1	000000000	0000
				1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 8	—	1	000000000	0000
				1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 8	—	1	000000000	0000
				1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 8	—	1	000000000	0000
				1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 8	—	1	000000000	0000
				1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 8	—	1	000000000	0000
				2"-4 1/2	3"	1 23/32"	SAE Grade 8	—	1	000000000	00000
				2"-12	3"	1 23/32"	SAE Grade 8	—	1	000000000	00000
				M6 × 1 mm	10 mm	5 mm	ISO Class 10	DIN 934	100	000000000	00000


				M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	50	000000000	00000
				M10 × 1.5 mm	17 mm	8 mm	ISO Class 10	DIN 934	25	000000000	00000
				M12 × 1.75 mm	19 mm	10 mm	ISO Class 10	DIN 934	25	000000000	00000


				Steel



			1/4"-20		7/16"	7/32"	SAE Grade 8	—	100	000000000	0000


			1/4"-28		7/16"	7/32"	SAE Grade 8	—	100	000000000	0000
			5/16"-18		1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
			5/16"-24		1/2"	17/64"	SAE Grade 8	—	100	000000000	0000
			3/8"-16		9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
			3/8"-24		9/16"	21/64"	SAE Grade 8	—	100	000000000	00000
			7/16"-14		11/16"	3/8"	SAE Grade 8	—	100	000000000	00000
			7/16"-20		11/16"	3/8"	SAE Grade 8	—	100	000000000	00000
			1/2"-13		3/4"	7/16"	SAE Grade 8	—	50	000000000	00000
			1/2"-20		3/4"	7/16"	SAE Grade 8	—	50	000000000	0000
			9/16"-12		7/8"	31/64"	SAE Grade 8	—	50	000000000	00000


9/16"-18	7/8"		31/64"		SAE Grade 8	—	50	000000000	00000
5/8"-11	15/16"		35/64"		SAE Grade 8	—	50	000000000	00000
5/8"-18	15/16"		35/64"		SAE Grade 8	—	25	000000000	00000
3/4"-10	1 1/8"		41/64"		SAE Grade 8	—	25	000000000	00000
3/4"-16	1 1/8"		41/64"		SAE Grade 8	—	10	000000000	0000
7/8"-9	1 5/16"		3/4"		SAE Grade 8	—	10	000000000	00000
7/8"-14	1 5/16"		3/4"		SAE Grade 8	—	10	000000000	00000
1"-12	1 1/2"		55/64"		SAE Grade 8	—	1	000000000	0000
1"-14	1 1/2"		55/64"		SAE Grade 8	—	10	000000000	00000
1 1/8"-7	1 11/16"		31/32"		SAE Grade 8	—	5	000000000	00000


1 1/8"-12	1 11/16"		31/32"		SAE Grade 8	—	5	000000000	00000
1 1/4"-7	1 7/8"		1 1/16"		SAE Grade 8	—	5	000000000	00000
1 1/4"-12	1 7/8"		1 1/16"		SAE Grade 8	—	5	000000000	00000
1 3/8"-6	2 1/16"		1 11/64"		SAE Grade 8	—	1	000000000	0000
1 3/8"-12	2 1/16"		1 11/64"		SAE Grade 8	—	1	000000000	0000
1 1/2"-6	2 1/4"		1 9/32"		SAE Grade 8	—	1	000000000	0000
1 1/2"-12	2 1/4"		1 9/32"		SAE Grade 8	—	1	000000000	0000
1 3/4"-5	2 5/8"		1 1/2"		SAE Grade 8	—	1	000000000	00000
1 3/4"-12	2 5/8"		1 1/2"		SAE Grade 8	—	1	000000000	00000
2"-4 1/2	3"		1 23/32"		SAE Grade 8	—	1	000000000	00000


2"-12	3"		1 23/32"		SAE Grade 8	—	1	000000000	00000
M3 × 0.5 mm	5.5 mm		2.4 mm		ISO Class 10	DIN 934	25	000000000	00000
M4 × 0.7 mm	7 mm		3.2 mm		ISO Class 10	DIN 934	100	000000000	0000
M5 × 0.8 mm	8 mm		4 mm		ISO Class 10	DIN 934	100	000000000	0000
M6 × 1 mm	10 mm		5 mm		ISO Class 10	DIN 934	100	000000000	00000
M8 × 1 mm	13 mm		6.5 mm		ISO Class 10	DIN 934	50	00000000	00000
M8 × 1.25 mm	13 mm		6.5 mm		ISO Class 10	DIN 934	100	000000000	00000
M10 × 1 mm	17 mm		8 mm		ISO Class 10	DIN 934	10	00000000	0000
M10 × 1.25 mm	17 mm		8 mm		ISO Class 10	DIN 934	10	00000000	0000
M10 × 1.5 mm	17 mm		8 mm		ISO Class 10	DIN 934	50	000000000	00000


M12 × 1 mm	19 mm		10 mm		ISO Class 10	DIN 934	10	00000000	00000
M12 × 1.25 mm	19 mm		10 mm		ISO Class 10	DIN 934	25	00000000	00000
M12 × 1.5 mm	19 mm		10 mm		ISO Class 10	DIN 934	10	00000000	0000
M12 × 1.75 mm	19 mm		10 mm		ISO Class 10	DIN 934	25	000000000	00000
M14 × 1.5 mm	22 mm		11 mm		ISO Class 10	DIN 934	10	00000000	0000
M14 × 2 mm	22 mm		11 mm		ISO Class 10	DIN 934	25	000000000	00000
M16 × 1.5 mm	24 mm		13 mm		ISO Class 10	DIN 934	10	00000000	00000
M16 × 2 mm	24 mm		13 mm		ISO Class 10	DIN 934	10	000000000	00000
M18 × 1.5 mm	27 mm		15 mm		ISO Class 10	DIN 934	5	00000000	0000
M18 × 2.5 mm	27 mm		15 mm		ISO Class 10	DIN 934	10	000000000	00000

M20 × 1.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	5	0000000	0000
M20 × 2 mm	30 mm	16 mm	ISO Class 10	DIN 934	5	00000000	00000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	10	000000000	00000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	00000000	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	5	000000000	00000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	00000000	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	00000000	0000
M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	5	000000000	00000
M27 × 2 mm	41 mm	22 mm	ISO Class 10	DIN 934	1	00000000	0000
M27 × 3 mm	41 mm	22 mm	ISO Class 10	DIN 934	5	000000000	00000
M30 × 1.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	00000000	00000
M30 × 2 mm	49 mm	24 mm	ISO Class 10	DIN 934	1	00000000	00000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	0000
M36 × 2 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	00000000	00000
M36 × 4 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	000000000	00000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 10	DIN 934	1	000000000	00000
M48 × 5 mm	75 mm	38 mm	ISO Class 10	DIN 934	1	000000000	00000

Blue Dyed Steel



		M6 × 1 mm	10 mm	5 mm	ISO Class 10	DIN 934	50	000000000	0000


		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	50	000000000	00000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 10	DIN 934	25	000000000	00000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	000000000	0000
		M14 × 2 mm	22 mm	11 mm	ISO Class 10	DIN 934	10	000000000	00000
		M16 × 2 mm	24 mm	13 mm	ISO Class 10	DIN 934	10	000000000	00000
		M18 × 2.5 mm	27 mm	15 mm	ISO Class 10	DIN 934	1	000000000	0000
		M20 × 2.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	1	000000000	0000
		M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	000000000	0000
		M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	000000000	0000
		M36 × 4 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	000000000	00000

High-Strength Steel with Material Certificate

Nuts include a report with a traceable lot number and a description of their chemical and physical properties. Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M36 × 4 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	000000000	000000


	Zinc-Yellow-Chromate-Plated Steel



			1/4"-20	7/16"	7/32"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	100	000000000	0000


			5/16"-18	1/2"	17/64"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	100	000000000	00000
			3/8"-16	9/16"	21/64"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	100	000000000	00000
			1/2"-13	3/4"	7/16"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	50	000000000	00000
			5/8"-11	15/16"	35/64"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	25	000000000	00000
			3/4"-10	1 1/8"	41/64"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	10	000000000	00000
			7/8"-14	1 5/16"	3/4"	SAE Grade 8	—	10	000000000	00000
			1"-8	1 1/2"	55/64"	SAE Grade 8	ASME B1.1, ASME B18.2.2, SAE J995	5	000000000	00000
			1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 8	—	1	000000000	0000


			Steel



					1"-8	1 1/2"	55/64"	SAE Grade 8	—	10	000000000	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Hot-Dipped Galvanized Steel—Combines the strength of steel with the rust resistance of stainless steel. These nuts are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals. The galvanized finish is thicker than other types of coatings, so the threads may be more likely to stick during installation. Use with other hot-dipped galvanized fasteners.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		1/4"-20	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	00000


		1/4"-28	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
		5/16"-18	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
		5/16"-24	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
		3/8"-16	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
		3/8"-24	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
		7/16"-14	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		7/16"-20	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		1/2"-13	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		1/2"-20	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		9/16"-12	7/8"	31/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000


		9/16"-18	7/8"	31/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		5/8"-11	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		5/8"-18	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
		7/8"-9	1 5/16"	3/4"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
		1"-8	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	5	000000000	00000
		1"-12	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	5	000000000	00000
		1"-14	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	10	000000000	00000


		1 1/8"-7	1 11/16"	31/32"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
		1 1/8"-12	1 11/16"	31/32"	SAE Grade 2	ASME B18.2.2	5	000000000	0000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 2	ASME B18.2.2	5	000000000	0000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 2	ASME B18.2.2	5	000000000	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
		M1 × 0.25 mm	2.5 mm	0.8 mm	—	DIN 934	10	000000000	0000
		M1.2 × 0.25 mm	3 mm	1 mm	—	DIN 934	10	000000000	0000


		M1.4 × 0.3 mm	3 mm	1.2 mm	—	DIN 934	10	000000000	0000
		M1.6 × 0.35 mm	3.2 mm	1.3 mm	—	DIN 934	50	000000000	00000
		M1.8 × 0.35 mm	3.5 mm	1.4 mm	—	DIN 934	10	000000000	0000
		M2 × 0.4 mm	4 mm	1.6 mm	—	DIN 934	100	000000000	0000
		M2.3 × 0.4 mm	4.5 mm	1.8 mm	—	DIN 934	50	000000000	0000
		M2.5 × 0.45 mm	5 mm	2 mm	—	DIN 934	100	000000000	0000
		M2.6 × 0.45 mm	5 mm	2 mm	—	DIN 934	100	000000000	0000
		M3 × 0.35 mm	5.5 mm	2.4 mm	—	DIN 934	10	000000000	00000
		M3 × 0.5 mm	5.5 mm	2.4 mm	—	DIN 934	100	000000000	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	—	DIN 934	100	000000000	0000


		M4 × 0.5 mm	7 mm	3.2 mm	—	DIN 934	25	000000000	00000
		M4 × 0.7 mm	7 mm	3.2 mm	—	DIN 934	100	000000000	0000
		M5 × 0.5 mm	8 mm	4 mm	—	DIN 934	50	000000000	00000
		M5 × 0.8 mm	8 mm	4 mm	—	DIN 934	100	000000000	0000
		M6 × 0.75 mm	10 mm	5 mm	—	DIN 934	50	000000000	00000


		Zinc-Yellow-Chromate-Plated Steel



M2 × 0.4 mm	4 mm			1.6 mm	—	DIN 934	50	000000000	0000


M2.5 × 0.45 mm	5 mm			2 mm	—	DIN 934	25	000000000	0000
M3 × 0.5 mm	5.5 mm			2.4 mm	—	DIN 934	25	000000000	0000
M4 × 0.7 mm	7 mm			3.2 mm	—	DIN 934	25	000000000	0000
M5 × 0.8 mm	8 mm			4 mm	—	DIN 934	25	000000000	0000


Black-Oxide Steel



				1/4"-20	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	00000


				5/16"-18	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
				3/8"-16	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
				1/2"-13	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
				5/8"-11	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
				3/4"-10	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
				1"-8	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
				M8 × 1.25 mm	13 mm	6.5 mm	—	DIN 934	1	000000000	0000
				M10 × 1.5 mm	17 mm	8 mm	—	DIN 934	1	000000000	0000
				M20 × 2.5 mm	30 mm	16 mm	—	DIN 934	1	000000000	00000


				Hot-Dipped Galvanized Steel



						1/4"-20	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	0000


						5/16"-18	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
						3/8"-16	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
						7/16"-14	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	50	000000000	0000
						1/2"-13	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
						5/8"-11	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
						3/4"-10	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	10	000000000	0000
						7/8"-9	1 5/16"	3/4"	SAE Grade 2	ASME B18.2.2	10	000000000	00000
						1"-8	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	5	000000000	0000
						1 1/8"-7	1 11/16"	31/32"	SAE Grade 2	ASME B18.2.2	1	000000000	0000
						1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 2	ASME B18.2.2	1	000000000	0000


						1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 2	ASME B18.2.2	1	000000000	0000


						Steel



								1/4"-20	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	0000


								1/4"-28	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
								5/16"-18	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
								5/16"-24	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	000000000	0000
								3/8"-16	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
								3/8"-24	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
								7/16"-14	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		7/16"-20						11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		1/2"-13	3/4"					7/16"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		1/2"-20	3/4"					7/16"	SAE Grade 2	ASME B18.2.2	100	000000000	00000
		9/16"-12	7/8"					31/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000


		9/16"-18	7/8"					31/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		5/8"-11	15/16"					35/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		5/8"-18	15/16"					35/64"	SAE Grade 2	ASME B18.2.2	50	000000000	00000
		3/4"-10	1 1/8"					41/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
		3/4"-16	1 1/8"					41/64"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
		7/8"-9	1 5/16"					3/4"	SAE Grade 2	ASME B18.2.2	25	000000000	00000
7/8"-14		1 5/16"	3/4"					SAE Grade 2	ASME B18.2.2	10	000000000	00000
1"-8	1 1/2"	55/64"	SAE Grade 2					ASME B18.2.2	10	000000000	00000
1"-12	1 1/2"	55/64"	SAE Grade 2					ASME B18.2.2	10	000000000	00000
1"-14	1 1/2"	55/64"	SAE Grade 2					ASME B18.2.2	10	000000000	00000


1 1/8"-7	1 11/16"	31/32"	SAE Grade 2					ASME B18.2.2	10	000000000	00000
1 1/8"-12	1 11/16"	31/32"	SAE Grade 2					ASME B18.2.2	10	000000000	00000
1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 2					ASME B18.2.2	5	000000000	00000
1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 2					ASME B18.2.2	5	000000000	00000
1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 2					ASME B18.2.2	1	000000000	0000
1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 2					ASME B18.2.2	1	000000000	0000
1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 2					ASME B18.2.2	1	000000000	0000
1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 2					ASME B18.2.2	1	000000000	0000
1 5/8"-5 1/2	2 7/16"	1 25/64"	SAE Grade 2					ASME B18.2.2	1	000000000	0000
1 5/8"-12	2 7/16"	1 25/64"	SAE Grade 2					ASME B18.2.2	1	000000000	0000


1 3/4"-5	2 5/8"	1 1/2"	SAE Grade 2	ASME B18.2.2				1	000000000	00000
1 3/4"-12	2 5/8"	1 1/2"	SAE Grade 2	ASME B18.2.2	1			000000000	0000
1 7/8"-5	2 13/16"	1 39/64"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
1 7/8"-12	2 13/16"	1 39/64"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2"-12	3"	1 23/32"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2 1/4"-4 1/2	3 3/8"	1 15/16"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2 1/4"-12	3 3/8"	1 15/16"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2 1/2"-4	3 3/4"	2 5/32"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2 1/2"-12	3 3/4"	2 5/32"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
2 3/4"-4	4 1/8"	2 3/8"	SAE Grade 2	ASME B18.2.2	1			000000000	00000


3"-4	4 1/2"	2 19/32"	SAE Grade 2	ASME B18.2.2	1			000000000	00000
3"-12	4 1/2"	2 19/32"	SAE Grade 2	ASME B18.2.2	1			000000000	000000
3 1/2"-4	5 3/8"	3 1/2"	SAE Grade 2	ASME B18.2.2	1			000000000	000000
M2 × 0.4 mm	4 mm	1.6 mm	—	DIN 934	100			000000000	0000
M2.5 × 0.45 mm	5 mm	2 mm	—	DIN 934	100			000000000	0000
M2.6 × 0.45 mm	5 mm	2 mm	—	DIN 934	100			000000000	0000
M3 × 0.5 mm	5.5 mm	2.4 mm	—	DIN 934	100			000000000	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	—	DIN 934	100			000000000	0000
M4 × 0.7 mm	7 mm	3.2 mm	—	DIN 934	100			000000000	0000
M5 × 0.8 mm	8 mm	4 mm	—	DIN 934	100			000000000	0000

M8 × 1.25 mm	13 mm	6.5 mm	—	DIN 934	1	000000000	0000
M10 × 1.5 mm	17 mm	8 mm	—	DIN 934	1	000000000	0000
M12 × 1.75 mm	19 mm	10 mm	—	DIN 934	1	000000000	0000
M16 × 2 mm	24 mm	13 mm	—	DIN 934	1	000000000	00000
M20 × 2.5 mm	30 mm	16 mm	—	DIN 934	1	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.

PTFE-Coated 18-8 Stainless Steel—A slippery PTFE coating prevents these nuts from becoming stuck during installation. The coating resists rust in wet and outdoor environments and can handle occasional exposure to mild acids and chemicals without corroding.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. Even if the coating wears off, these nuts will hold up in just about any environment, including salt water and most chemicals.

High-Strength 17-4 PH Stainless Steel—The strongest stainless steel nuts we offer, these are comparable in strength to Grade 8 steel. Use them in high-stress applications, such as fastening structural parts and pump components. They won’t rust in wet and outdoor environments, but they can’t handle the harsh chemicals and acids that 316 stainless steel can.

Highly Corrosion-Resistant High-Strength Bumax 88 Stainless Steel—Comparable in strength to Grade 5 steel and as corrosion resistant as 316 stainless steel. These nuts are commonly used in demanding environments, such as marine and chemical processing applications.

Seize-Resistant High-Strength 410 Stainless Steel—Resists sticking during installation and is comparable in strength to Grade 5 steel. These nuts are not as corrosion resistant as 18-8 stainless steel, so they're best for environments that experience occasional moisture.

High-Temperature High-Strength A286 Stainless Steel—Stronger than 316 stainless steel and withstands higher temperatures. These nuts resist corrosion from chemicals, such as bleach and chlorine, but they won't hold up to salt water as well as 316 stainless steel.

Ultra-Corrosion-Resistant Alloy 20 Stainless Steel—The most corrosion-resistant stainless steel nuts we offer, these hold up in just about any environment. They won't pit or weaken when exposed to salt water and harsh chemicals, such as sulfuric acid. Also known as Carpenter 20.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		1/4"-20	7/16"	7/32"	—	100	000000000	00000


		1/4"-28	7/16"	7/32"	—	100	000000000	0000
		1/4"-28	7/16"	7/32"	ASTM F594	50	000000000	0000
		1/4"-32	7/16"	7/32"	—	1	000000000	0000
		5/16"-18	1/2"	17/64"	—	100	000000000	0000
		5/16"-24	1/2"	17/64"	—	100	000000000	0000
		5/16"-24	1/2"	17/64"	ASTM F594	50	000000000	0000
		5/16"-32	1/2"	17/64"	—	1	000000000	0000
		3/8"-16	9/16"	21/64"	—	100	000000000	0000
		3/8"-24	9/16"	21/64"	—	50	000000000	0000
		3/8"-24	9/16"	21/64"	ASTM F594	25	000000000	0000


		3/8"-32	9/16"	21/64"	—	1	000000000	0000
		7/16"-14	11/16"	3/8"	—	50	000000000	0000
		7/16"-14	11/16"	3/8"	ASTM F594	10	000000000	0000
		7/16"-20	11/16"	3/8"	—	50	000000000	0000
		7/16"-20	11/16"	3/8"	ASTM F594	10	000000000	0000
		1/2"-13	3/4"	7/16"	—	25	000000000	0000
		1/2"-20	3/4"	7/16"	—	25	000000000	0000
		1/2"-20	3/4"	7/16"	ASTM F594	10	000000000	0000
		1/2"-28	3/4"	7/16"	—	1	000000000	00000
		9/16"-12	7/8"	31/64"	—	10	000000000	0000


		9/16"-12	7/8"	31/64"	ASTM F594	10	000000000	0000
		9/16"-18	7/8"	31/64"	—	10	000000000	0000
		5/8"-11	15/16"	35/64"	—	10	000000000	0000
		5/8"-11	15/16"	35/64"	ASTM F594	5	000000000	0000
		5/8"-18	15/16"	35/64"	—	10	000000000	0000
		5/8"-18	15/16"	35/64"	ASTM F594	5	000000000	0000
		5/8"-24	15/16"	35/64"	—	1	000000000	00000
		3/4"-10	1 1/8"	41/64"	—	10	000000000	0000
		3/4"-16	1 1/8"	41/64"	—	5	000000000	0000
		3/4"-16	1 1/8"	41/64"	ASTM F594	5	000000000	0000


		3/4"-20	1 1/8"	41/64"	—	1	000000000	00000
		7/8"-9	1 5/16"	3/4"	—	5	000000000	0000
		7/8"-9	1 5/16"	3/4"	ASTM F594	1	000000000	0000
		7/8"-14	1 5/16"	3/4"	—	5	000000000	0000
		7/8"-14	1 5/16"	3/4"	ASTM F594	1	000000000	0000
		7/8"-20	1 5/16"	3/4"	—	1	000000000	00000
		1"-8	1 1/2"	55/64"	—	5	000000000	0000
		1"-8	1 1/2"	55/64"	ASTM F594	1	000000000	0000
		1"-12	1 1/2"	55/64"	—	1	000000000	0000
		1"-12	1 1/2"	55/64"	ASTM F594	1	000000000	0000


		1"-14	1 1/2"	55/64"	—	1	000000000	0000
		1"-14	1 1/2"	55/64"	ASTM F594	1	000000000	0000
		1 1/8"-7	1 11/16"	31/32"	—	1	000000000	0000
		1 1/8"-7	1 11/16"	31/32"	ASTM F594	1	000000000	0000
		1 1/8"-12	1 11/16"	31/32"	—	1	000000000	0000
		1 1/4"-7	1 7/8"	1 1/16"	—	1	000000000	0000
		1 1/4"-7	1 7/8"	1 1/16"	ASTM F594	1	000000000	0000
		1 1/4"-12	1 7/8"	1 1/16"	—	1	000000000	0000
		1 3/8"-6	2 1/16"	1 11/64"	—	1	000000000	0000
		1 1/2"-6	2 1/4"	1 9/32"	—	1	000000000	0000

1 1/2"-6	2 1/4"	1 9/32"	ASTM F594	1	000000000	00000
1 1/2"-12	2 1/4"	1 9/32"	—	1	000000000	0000
1 3/4"-5	2 5/8"	1 1/2"	—	1	000000000	00000
2"-4 1/2	3"	1 23/32"	—	1	000000000	00000
M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	5	000000000	00000
M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	5	000000000	0000
M1.4 × 0.3 mm	3 mm	1.2 mm	DIN 934	1	000000000	0000
M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	25	000000000	00000
M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	100	000000000	0000
M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	100	000000000	0000
M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	100	000000000	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	100	000000000	0000
M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	100	000000000	0000
M5 × 0.8 mm	8 mm	4 mm	DIN 934	100	000000000	0000
M6 × 1 mm	10 mm	5 mm	DIN 934	100	000000000	00000
M7 × 1 mm	11 mm	5.5 mm	DIN 934	25	000000000	0000
M8 × 1 mm	13 mm	6.5 mm	DIN 934	10	000000000	0000
M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	50	000000000	00000
M10 × 1 mm	17 mm	8 mm	DIN 934	10	000000000	00000
M10 × 1.25 mm	17 mm	8 mm	DIN 934	5	000000000	00000
M10 × 1.5 mm	17 mm	8 mm	DIN 934	25	000000000	00000
M12 × 1 mm	19 mm	10 mm	DIN 934	5	000000000	00000
M12 × 1.25 mm	19 mm	10 mm	DIN 934	5	000000000	00000
M12 × 1.5 mm	19 mm	10 mm	DIN 934	5	000000000	00000
M12 × 1.75 mm	19 mm	10 mm	DIN 934	25	000000000	00000
M14 × 1.5 mm	22 mm	11 mm	DIN 934	1	000000000	0000
M14 × 2 mm	22 mm	11 mm	DIN 934	10	000000000	00000
M16 × 1.5 mm	24 mm	13 mm	DIN 934	1	000000000	0000
M16 × 2 mm	24 mm	13 mm	DIN 934	10	000000000	00000
M18 × 1.5 mm	27 mm	15 mm	DIN 934	1	000000000	0000
M18 × 2.5 mm	27 mm	15 mm	DIN 934	5	000000000	00000
M20 × 1.5 mm	30 mm	16 mm	DIN 934	1	000000000	0000
M20 × 2 mm	30 mm	14.3 mm	DIN 934	1	000000000	00000
M20 × 2.5 mm	30 mm	16 mm	DIN 934	5	000000000	00000
M22 × 1.5 mm	32 mm	18 mm	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	DIN 934	1	000000000	0000
M24 × 1.5 mm	36 mm	19 mm	DIN 934	1	000000000	0000
M24 × 2 mm	36 mm	19 mm	DIN 934	1	000000000	00000
M24 × 3 mm	36 mm	19 mm	DIN 934	1	000000000	0000
M27 × 2 mm	41 mm	20.7 mm	DIN 934	1	000000000	00000
M27 × 3 mm	41 mm	22 mm	DIN 934	1	000000000	0000
M30 × 1.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
M30 × 2 mm	46 mm	22.7 mm	DIN 934	1	000000000	00000
M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
M33 × 1.5 mm	50 mm	24.7 mm	DIN 934	1	000000000	00000
M33 × 3.5 mm	50 mm	24.7 mm	DIN 934	1	000000000	00000
M36 × 1.5 mm	55 mm	29 mm	DIN 934	1	000000000	00000
M36 × 3 mm	55 mm	27.4 mm	DIN 934	1	000000000	00000
M36 × 4 mm	55 mm	29 mm	DIN 934	1	000000000	00000
M42 × 4.5 mm	65 mm	34 mm	DIN 934	1	000000000	00000
M48 × 5 mm	75 mm	38 mm	DIN 934	1	000000000	00000

Black-Oxide 18-8 Stainless Steel



		5/16"-18	1/2"	17/64"	—	25	000000000	0000


		5/16"-24	1/2"	17/64"	—	25	000000000	0000
		3/8"-24	9/16"	21/64"	—	25	000000000	0000
		7/16"-14	11/16"	3/8"	—	10	000000000	0000
		7/16"-20	11/16"	3/8"	—	10	000000000	0000
		1/2"-13	3/4"	7/16"	—	10	000000000	0000
		1/2"-20	3/4"	7/16"	—	10	000000000	0000
		5/8"-11	15/16"	35/64"	—	5	000000000	0000
		5/8"-18	15/16"	35/64"	—	5	000000000	0000
		3/4"-10	1 1/8"	41/64"	—	1	000000000	0000
		3/4"-16	1 1/8"	41/64"	—	1	000000000	0000


		M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	5	000000000	00000
		M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	5	000000000	0000
		M1.4 × 0.3 mm	3 mm	1.2 mm	DIN 934	5	000000000	0000
		M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	5	000000000	0000
		M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	100	000000000	00000
		M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	100	000000000	00000
		M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	100	000000000	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	10	000000000	0000
		M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	100	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	DIN 934	100	000000000	00000


		M6 × 1 mm	10 mm	5 mm	DIN 934	50	000000000	0000
		M7 × 1 mm	11 mm	5.5 mm	DIN 934	10	000000000	0000
		M8 × 1 mm	13 mm	6.5 mm	DIN 934	1	000000000	0000
		M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	50	000000000	00000
		M10 × 1 mm	17 mm	8 mm	DIN 934	1	000000000	0000
		M10 × 1.25 mm	17 mm	8 mm	DIN 934	1	000000000	0000
		M10 × 1.5 mm	17 mm	8 mm	DIN 934	25	000000000	00000
		M12 × 1 mm	19 mm	10 mm	DIN 934	1	000000000	0000
		M12 × 1.25 mm	19 mm	10 mm	DIN 934	1	000000000	0000
		M12 × 1.5 mm	19 mm	10 mm	DIN 934	1	000000000	0000


		M12 × 1.75 mm	19 mm	10 mm	DIN 934	25	000000000	00000
		M14 × 1.5 mm	22 mm	11 mm	DIN 934	1	000000000	0000
		M14 × 2 mm	22 mm	11 mm	DIN 934	10	000000000	00000
		M16 × 1.5 mm	24 mm	13 mm	DIN 934	1	000000000	0000
		M16 × 2 mm	24 mm	13 mm	DIN 934	10	000000000	00000
		M18 × 2.5 mm	27 mm	15 mm	DIN 934	5	000000000	0000
		M20 × 1.5 mm	30 mm	16 mm	DIN 934	1	000000000	00000
		M20 × 2.5 mm	30 mm	16 mm	DIN 934	5	000000000	0000
		M22 × 2.5 mm	32 mm	18 mm	DIN 934	5	000000000	00000
		M24 × 1.5 mm	36 mm	19 mm	DIN 934	1	000000000	00000


		M24 × 3 mm	36 mm	19 mm	DIN 934	5	000000000	00000
		M27 × 1.5 mm	41 mm	22 mm	DIN 934	1	000000000	00000
		M27 × 3 mm	41 mm	22 mm	DIN 934	1	000000000	0000
		M30 × 1.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
		M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
		M33 × 1.5 mm	50 mm	26 mm	DIN 934	1	000000000	00000
		M33 × 3.5 mm	50 mm	26 mm	DIN 934	1	000000000	00000
		M36 × 4 mm	55 mm	29 mm	DIN 934	1	000000000	00000
		M42 × 4.5 mm	65 mm	34 mm	DIN 934	1	000000000	00000


PTFE-Coated 18-8 Stainless Steel



		1/4"-20	7/16"	3/16"	—	25	000000000	00000


		Highly Corrosion-Resistant 316 Stainless Steel



				1/4"-20	7/16"	7/32"	—	100	000000000	0000


				1/4"-20	7/16"	7/32"	ASTM F594	50	000000000	0000
				1/4"-28	7/16"	7/32"	—	50	000000000	0000
				1/4"-28	7/16"	7/32"	ASTM F594	50	000000000	0000
				5/16"-18	1/2"	17/64"	—	50	000000000	0000
				5/16"-18	1/2"	17/64"	ASTM F594	25	000000000	0000
				5/16"-24	1/2"	17/64"	—	50	000000000	0000
				5/16"-24	1/2"	17/64"	ASTM F594	25	000000000	0000
				3/8"-16	9/16"	21/64"	—	50	000000000	0000
				3/8"-16	9/16"	21/64"	ASTM F594	25	000000000	0000
				3/8"-24	9/16"	21/64"	—	25	000000000	0000


				3/8"-24	9/16"	21/64"	ASTM F594	25	000000000	0000
				7/16"-14	11/16"	3/8"	—	25	000000000	0000
				7/16"-14	11/16"	3/8"	ASTM F594	10	000000000	0000
				7/16"-20	11/16"	3/8"	—	10	000000000	0000
				7/16"-20	11/16"	3/8"	ASTM F594	10	000000000	0000
				1/2"-13	3/4"	7/16"	—	10	000000000	0000
				1/2"-13	3/4"	7/16"	ASTM F594	5	000000000	0000
				1/2"-20	3/4"	7/16"	—	10	000000000	0000
				1/2"-20	3/4"	7/16"	ASTM F594	5	000000000	0000
				9/16"-12	7/8"	31/64"	—	5	000000000	0000


				9/16"-12	7/8"	31/64"	ASTM F594	5	000000000	0000
				9/16"-18	7/8"	31/64"	—	5	000000000	0000
				5/8"-11	15/16"	35/64"	—	10	000000000	0000
				5/8"-18	15/16"	35/64"	—	5	000000000	0000
				5/8"-18	15/16"	35/64"	ASTM F594	5	000000000	0000
				3/4"-10	1 1/8"	41/64"	—	5	000000000	0000
				3/4"-10	1 1/8"	41/64"	ASTM F594	1	000000000	0000
				3/4"-16	1 1/8"	41/64"	—	5	000000000	0000
				3/4"-16	1 1/8"	41/64"	ASTM F594	1	000000000	0000
				7/8"-9	1 5/16"	3/4"	—	1	000000000	0000


				7/8"-9	1 5/16"	3/4"	ASTM F594	1	000000000	0000
				7/8"-14	1 5/16"	3/4"	—	1	000000000	0000
				7/8"-14	1 5/16"	3/4"	ASTM F594	1	000000000	0000
				1"-8	1 1/2"	55/64"	—	1	000000000	0000
				1"-8	1 1/2"	55/64"	ASTM F594	1	000000000	0000
				1"-12	1 1/2"	55/64"	—	1	000000000	0000
				1"-12	1 1/2"	55/64"	ASTM F594	1	000000000	00000
				1"-14	1 1/2"	55/64"	—	1	000000000	0000
				1"-14	1 1/2"	55/64"	ASTM F594	1	000000000	0000
				1 1/8"-7	1 11/16"	31/32"	ASTM F594	1	000000000	0000


				1 1/4"-7	1 7/8"	1 1/16"	—	1	000000000	0000
				1 1/4"-7	1 7/8"	1 1/16"	ASTM F594	1	000000000	00000
				1 1/2"-6	2 1/4"	1 9/32"	—	1	000000000	0000
1 1/2"-6				2 1/4"	1 9/32"	ASTM F594	1	000000000	00000
1 3/4"-5	2 5/8"			1 1/2"	—	1	000000000	00000
2"-4 1/2	3"			1 23/32"	—	1	000000000	00000
M1 × 0.25 mm	2.5 mm			0.8 mm	DIN 934	1	000000000	0000
M1.2 × 0.25 mm	3 mm			1 mm	DIN 934	5	000000000	00000
M1.4 × 0.3 mm	3 mm			1.2 mm	DIN 934	5	000000000	0000
M1.6 × 0.35 mm	3.2 mm			1.3 mm	DIN 934	10	000000000	0000

M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	50	000000000	0000
M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	50	000000000	0000
M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	50	000000000	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	50	000000000	0000
M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	50	000000000	0000
M5 × 0.8 mm	8 mm	4 mm	DIN 934	50	000000000	0000
M6 × 1 mm	10 mm	5 mm	DIN 934	50	000000000	00000
M7 × 1 mm	11 mm	5.5 mm	DIN 934	25	000000000	00000
M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	50	000000000	00000
M10 × 1.5 mm	17 mm	8 mm	DIN 934	10	000000000	00000
M12 × 1.75 mm	19 mm	10 mm	DIN 934	5	000000000	0000
M14 × 2 mm	22 mm	11 mm	DIN 934	5	000000000	00000
M16 × 2 mm	24 mm	13 mm	DIN 934	5	000000000	00000
M18 × 2.5 mm	27 mm	15 mm	DIN 934	1	000000000	0000
M20 × 2.5 mm	30 mm	16 mm	DIN 934	1	000000000	0000
M22 × 2.5 mm	32 mm	18 mm	DIN 934	1	000000000	0000
M24 × 3 mm	36 mm	19 mm	DIN 934	1	000000000	0000
M27 × 3 mm	41 mm	20.7 mm	DIN 934	1	000000000	0000
M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
M33 × 3.5 mm	50 mm	26 mm	DIN 934	1	000000000	00000
M36 × 4 mm	55 mm	29 mm	DIN 934	1	000000000	00000
M39 × 4 mm	60 mm	31 mm	DIN 934	1	000000000	00000
M42 × 4.5 mm	65 mm	34 mm	DIN 934	1	000000000	00000
M48 × 5 mm	75 mm	38 mm	DIN 934	1	000000000	00000

Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel



		M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	1	000000000	0000


		M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	1	000000000	0000
		M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	5	000000000	0000
		M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	50	000000000	00000
		M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	10	000000000	00000
		M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	25	000000000	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	10	000000000	00000
		M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	25	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	DIN 934	25	000000000	0000
		M6 × 1 mm	10 mm	5 mm	DIN 934	25	000000000	00000
		M7 × 1 mm	11 mm	5.5 mm	DIN 934	10	000000000	00000


		M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	10	000000000	00000
		M10 × 1.5 mm	17 mm	8 mm	DIN 934	5	000000000	0000
		M12 × 1.75 mm	19 mm	10 mm	DIN 934	5	000000000	0000
		M14 × 2 mm	22 mm	11 mm	DIN 934	5	000000000	00000
		M16 × 2 mm	24 mm	13 mm	DIN 934	5	000000000	00000
		M18 × 2.5 mm	27 mm	15 mm	DIN 934	1	000000000	0000
		M20 × 2.5 mm	30 mm	16 mm	DIN 934	1	000000000	0000
		M24 × 3 mm	36 mm	19 mm	DIN 934	1	000000000	0000
		M27 × 3 mm	41 mm	22 mm	DIN 934	1	000000000	00000


		High-Strength 17-4 PH Stainless Steel



				1/4"-20	7/16"	7/32"	ASTM F594	1	000000000	00000


				5/16"-18	1/2"	17/64"	ASTM F594	1	000000000	00000
				3/8"-16	9/16"	21/64"	ASTM F594	1	000000000	00000
				3/4"-10	1 1/8"	41/64"	ASTM F594	1	000000000	00000


				Highly Corrosion-Resistant High-Strength Bumax 88 Stainless Steel



						5/16"-18	1/2"	15/64"	—	1	000000000	0000


						3/8"-16	9/16"	21/64"	—	1	000000000	0000
						1/2"-13	3/4"	7/16"	—	1	000000000	00000
						5/8"-11	1"	33/64"	—	1	000000000	00000
						M6 × 1 mm	10 mm	5.2 mm	ISO 4032	10	000000000	0000
						M8 × 1.25 mm	13 mm	6.8 mm	ISO 4032	5	000000000	0000
						M10 × 1.5 mm	16 mm	8.4 mm	ISO 4032	1	000000000	0000
						M12 × 1.75 mm	18 mm	10.8 mm	ISO 4032	1	000000000	0000
						M16 × 2 mm	24 mm	14.8 mm	ISO 4032	1	000000000	0000
						M20 × 2.5 mm	30 mm	18 mm	ISO 4032	1	000000000	00000


						Seize-Resistant High-Strength 410 Stainless Steel



								1/4"-20	7/16"	7/32"	—	5	000000000	0000


5/16"-18	1/2"							17/64"	—	5	000000000	0000
3/8"-16	9/16"							21/64"	—	5	000000000	0000
1/2"-13	3/4"							7/16"	—	5	000000000	00000


High-Temperature High-Strength A286 Stainless Steel



								1/4"-20	7/16"	7/32"	—	1	000000000	00000


								5/16"-18	1/2"	17/64"	—	1	000000000	00000
								3/8"-16	9/16"	21/64"	—	1	000000000	00000
								1/2"-13	3/4"	7/16"	—	1	000000000	00000


								Ultra-Corrosion-Resistant Alloy 20 Stainless Steel



										1/4"-20	7/16"	7/32"	—	1	000000000	0000


										3/8"-16	9/16"	21/64"	—	1	000000000	0000
										1/2"-13	3/4"	7/16"	—	1	000000000	00000

Lightweight Aluminum

6061 Aluminum—One-third the weight of steel, these nuts are commonly used in robotics, automation, and other applications that have weight limitations. They're an alternative to stainless steel for rust resistance but are not as strong.

Black Corrosion-Resistant-Coated 6061 Aluminum—Offers better rust resistance than plain aluminum. Also known as black luster, the coating creates a finished appearance and has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. One-third the weight of steel, these nuts are suitable for robotics, automation, and other applications that have weight limitations.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
6061 Aluminum



	1/4"-20	7/16"	7/32"	ASME B18.2.2	100	000000000	00000


	1/4"-28	7/16"	7/32"	ASME B18.2.2	10	000000000	00000
	5/16"-18	1/2"	17/64"	ASME B18.2.2	100	000000000	00000
	5/16"-24	1/2"	17/64"	ASME B18.2.2	10	000000000	00000
	3/8"-16	9/16"	21/64"	ASME B18.2.2	50	000000000	00000
	3/8"-24	9/16"	21/64"	ASME B18.2.2	10	000000000	00000
	7/16"-14	11/16"	3/8"	ASME B18.2.2	5	000000000	0000
	7/16"-20	11/16"	3/8"	ASME B18.2.2	5	000000000	00000
	1/2"-13	3/4"	7/16"	ASME B18.2.2	25	000000000	00000
	5/8"-11	15/16"	35/64"	ASME B18.2.2	10	000000000	00000
	5/8"-18	15/16"	35/64"	ASME B18.2.2	1	000000000	0000


	3/4"-10	1 1/8"	41/64"	ASME B18.2.2	5	000000000	0000
	M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	5	000000000	00000
	M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	50	000000000	00000
	M5 × 0.8 mm	8 mm	4 mm	DIN 934	50	000000000	00000
	M6 × 1 mm	10 mm	5 mm	DIN 934	25	000000000	00000
	M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	25	000000000	00000
	M10 × 1.5 mm	17 mm	8 mm	DIN 934	10	000000000	0000
	M12 × 1.75 mm	19 mm	10 mm	DIN 934	5	000000000	00000
	M16 × 2 mm	24 mm	13 mm	DIN 934	5	000000000	00000


	Black Corrosion-Resistant-Coated 6061 Aluminum



			8-32	11/32"	1/8"	ASME B18.2.2	5	000000000	0000


			10-24	3/8"	1/8"	ASME B18.2.2	5	000000000	0000
			10-32	3/8"	1/8"	ASME B18.2.2	5	000000000	0000
			1/4"-20	7/16"	7/32"	ASME B18.2.2	5	000000000	0000
			5/16"-18	1/2"	17/64"	ASME B18.2.2	5	000000000	0000
			3/8"-16	9/16"	21/64"	ASME B18.2.2	5	000000000	00000
			1/2"-13	3/4"	7/16"	ASME B18.2.2	1	000000000	0000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	7/16"	7/32"	ASTM F594	50	000000000	00000


	5/16"-18	1/2"	17/64"	ASTM F594	50	000000000	0000
	3/8"-16	9/16"	21/64"	ASTM F594	25	000000000	0000
	7/16"-28	11/16"	3/8"	—	1	000000000	0000
	1/2"-13	3/4"	7/16"	ASTM F594	10	000000000	0000
	11/16"-24	1"	27/64"	—	1	000000000	00000
	3/4"-10	1 1/8"	41/64"	ASTM F594	5	000000000	0000


	Black-Oxide 18-8 Stainless Steel



			1/4"-20	7/16"	7/32"	—	50	000000000	0000


			1/4"-28	7/16"	7/32"	—	50	000000000	0000
			3/8"-16	9/16"	21/64"	—	25	000000000	0000
			M30 × 2 mm	46 mm	24 mm	DIN 934	1	000000000	00000
			M48 × 5 mm	75 mm	38 mm	DIN 934	1	000000000	00000


			Highly Corrosion-Resistant 316 Stainless Steel



					5/8"-11	15/16"	35/64"	ASTM F594	5	000000000	0000


					1 1/8"-7	1 11/16"	31/32"	—	1	000000000	0000
					1 3/8"-6	2 1/16"	1 11/64"	—	1	000000000	0000


					High-Strength 17-4 PH Stainless Steel



							1/2"-13	3/4"	7/16"	ASTM F594	1	000000000	00000

Lightweight Corrosion-Resistant Titanium

Grade 2 Titanium—The best of both worlds, these nuts are lightweight like aluminum and as corrosion resistant as 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These nuts are ideal for use in chemical-processing and water-treatment facilities since they stand up to strong acids and other harsh chemicals.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
Grade 2 Titanium



	2-56	1/4"	1/16"	—	1	000000000	000000


	4-40	1/4"	3/32"	—	1	000000000	00000
	6-32	5/16"	7/64"	—	1	000000000	0000
	8-32	3/8"	1/8"	—	1	000000000	0000
	10-24	3/8"	1/8"	—	1	000000000	0000
	10-32	3/8"	1/8"	—	1	000000000	0000
	1/4"-20	7/16"	7/32"	—	1	000000000	0000
	5/16"-18	1/2"	17/64"	—	1	000000000	0000
	3/8"-16	9/16"	21/64"	—	1	000000000	0000
	1/2"-13	3/4"	7/16"	—	1	000000000	00000
	5/8"-11	15/16"	35/64"	—	1	000000000	00000


	3/4"-10	1 1/8"	41/64"	—	1	000000000	00000
	M6 × 1 mm	10 mm	5.2 mm	ISO 4032	1	000000000	0000
	M8 × 1.25 mm	13 mm	6.8 mm	ISO 4032	1	000000000	0000
	M10 × 1.5 mm	16 mm	8.4 mm	ISO 4032	1	000000000	0000
	M12 × 1.75 mm	18 mm	10.8 mm	ISO 4032	1	000000000	00000

Corrosion-Resistant Nickel

400 Nickel—Also known as Monel, 400 nickel is an economical alternative to titanium. These nuts are just as corrosion resistant to stand up to salt water and strong acids. However, they are not as strong as C276 nickel nuts.

C276 Nickel—Also known as Hastelloy, these nuts have the best chemical resistance of all the metal nuts we offer. They resist pitting and cracking, even when exposed to the harshest substances, such as acids and sulfides. They are stronger than 400 nickel nuts.

	Wd.	Ht.	Pkg. Qty.		Pkg.
400 Nickel



	10-24	3/8"	1/8"	1	000000000	00000


	10-32	3/8"	1/8"	1	000000000	0000
	1/4"-20	7/16"	7/32"	10	000000000	00000
	5/16"-18	1/2"	17/64"	5	000000000	00000
	3/8"-16	9/16"	21/64"	1	000000000	0000
	7/16"-14	11/16"	3/8"	1	000000000	0000
	1/2"-13	3/4"	7/16"	1	000000000	00000
	5/8"-11	15/16"	35/64"	1	000000000	00000
	3/4"-10	1 1/8"	41/64"	1	000000000	00000
	7/8"-9	1 5/16"	3/4"	1	000000000	00000


	C276 Nickel



			1/4"-20	7/16"	7/32"	1	000000000	00000


			5/16"-18	1/2"	17/64"	1	000000000	00000
			3/8"-16	9/16"	21/64"	1	000000000	00000
			1/2"-13	3/4"	7/16"	1	000000000	00000
			5/8"-11	15/16"	35/64"	1	000000000	00000
			3/4"-10	1 1/8"	41/64"	1	000000000	00000

Bronze

Silicon Bronze—More resistant to salt water than brass, these nuts are a good choice for marine environments. They are also stronger than brass and more resistant to abrasion and wear. Choose them for machinery with rotating parts or other applications where nearby components may rub against the nut.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
Silicon Bronze



	4-40	1/4"	3/32"	—	100	000000000	00000


	6-32	5/16"	7/64"	—	100	000000000	00000
	8-32	11/32"	1/8"	—	50	000000000	0000
	10-24	3/8"	1/8"	—	50	000000000	0000
	10-32	3/8"	1/8"	—	50	000000000	0000
	12-24	7/16"	5/32"	—	25	000000000	0000
	1/4"-20	7/16"	3/16"	—	25	000000000	00000
	1/4"-20	7/16"	7/32"	—	50	000000000	00000
	1/4"-28	7/16"	7/32"	—	25	000000000	00000
	5/16"-18	1/2"	17/64"	—	25	000000000	00000
	5/16"-24	1/2"	17/64"	—	10	000000000	0000


	3/8"-16	9/16"	21/64"	—	25	000000000	00000
	3/8"-16	5/8"	1/4"	—	10	000000000	0000
	3/8"-24	9/16"	21/64"	—	10	000000000	00000
	7/16"-14	11/16"	3/8"	—	10	000000000	00000
	7/16"-20	11/16"	3/8"	—	5	000000000	0000
	1/2"-13	3/4"	7/16"	—	10	000000000	00000
	1/2"-20	3/4"	7/16"	—	5	000000000	00000
	5/8"-18	15/16"	35/64"	—	1	000000000	0000
	3/4"-10	1 1/8"	41/64"	—	1	000000000	0000
	3/4"-16	1 1/8"	41/64"	—	1	000000000	0000


	7/8"-9	1 5/16"	3/4"	—	1	000000000	0000
	1"-8	1 1/2"	55/64"	—	1	000000000	00000
	1 1/8"-7	1 11/16"	31/32"	—	1	000000000	00000
	1 1/2"-6	2 1/4"	1 9/32"	—	1	000000000	00000
	M6 × 1 mm	10 mm	5 mm	DIN 934	10	000000000	00000
	M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	5	000000000	00000
	M10 × 1.5 mm	17 mm	8 mm	DIN 934	5	000000000	00000
	M12 × 1.75 mm	19 mm	10 mm	DIN 934	1	000000000	0000

Brass

Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.

Nickel-Plated Brass—The nickel plating offers better corrosion resistance than plain brass to stand up to solvents, salt water, and chemicals. The plating can wear off over time, so these nuts are not recommended for applications that experience a lot of friction or wear.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
Brass



		000-120	5/64"	1/32"	—	10	000000000	000000


		00-90	5/64"	3/64"	—	10	000000000	00000
		00-96	5/64"	3/64"	—	1	000000000	0000
		0-80	5/32"	3/64"	—	100	000000000	0000
		1-64	5/32"	3/64"	—	100	000000000	0000
		1-72	5/32"	3/64"	—	100	000000000	0000
		2-56	3/16"	1/16"	—	100	000000000	0000
		2-64	3/16"	1/16"	—	100	000000000	0000
		3-48	3/16"	1/16"	—	100	000000000	0000
		3-56	3/16"	1/16"	—	100	000000000	0000
		4-36	1/4"	3/32"	—	50	000000000	0000


		4-40	1/4"	3/32"	—	100	000000000	0000
		4-48	1/4"	3/32"	—	100	000000000	0000
		5-40	5/16"	7/64"	—	100	000000000	00000
		5-44	5/16"	7/64"	—	100	000000000	00000
		6-32	5/16"	7/64"	—	100	000000000	0000
		6-40	5/16"	7/64"	—	100	000000000	00000
		8-32	11/32"	1/8"	—	100	000000000	0000
		8-36	11/32"	1/8"	—	50	000000000	0000
		10-24	3/8"	1/8"	—	100	000000000	00000
		10-32	3/8"	1/8"	—	100	000000000	00000


		12-24	7/16"	5/32"	—	50	000000000	00000
		12-28	7/16"	5/32"	—	50	000000000	00000
		1/4"-20	7/16"	3/16"	—	50	000000000	00000
		1/4"-20	7/16"	7/32"	—	50	000000000	00000
		1/4"-28	7/16"	7/32"	—	50	000000000	00000
		5/16"-18	1/2"	17/64"	—	50	000000000	00000
		3/8"-16	9/16"	21/64"	—	25	000000000	00000
		3/8"-24	9/16"	21/64"	—	10	000000000	0000
		7/16"-14	11/16"	3/8"	—	10	000000000	0000
		7/16"-20	11/16"	3/8"	—	10	000000000	0000


		1/2"-13	3/4"	7/16"	—	10	000000000	0000
		1/2"-20	3/4"	7/16"	—	5	000000000	0000
		9/16"-12	7/8"	31/64"	—	5	000000000	0000
		5/8"-11	15/16"	35/64"	—	5	000000000	00000
		5/8"-18	15/16"	35/64"	—	1	000000000	0000
		3/4"-10	1 1/8"	41/64"	—	5	000000000	00000
		3/4"-16	1 1/8"	41/64"	—	1	000000000	0000
		7/8"-9	1 5/16"	3/4"	—	1	000000000	0000
		7/8"-14	1 5/16"	3/4"	—	1	000000000	0000
		1"-8	1 1/2"	55/64"	—	1	000000000	0000


		1 1/8"-7	1 11/16"	31/32"	—	1	000000000	00000
		1 1/4"-7	1 7/8"	1 1/16"	—	1	000000000	00000
		1 1/2"-6	2 1/4"	1 9/32"	—	1	000000000	00000
		M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	1	000000000	0000
		M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	5	000000000	00000
		M1.4 × 0.3 mm	3 mm	1.2 mm	DIN 934	5	000000000	00000
		M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	5	000000000	0000
		M1.7 × 0.35 mm	3.5 mm	1.4 mm	DIN 934	5	000000000	0000
		M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	100	000000000	0000
		M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	100	000000000	0000

M2.6 × 0.45 mm	5 mm	2 mm	DIN 934	50	000000000	00000
M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	100	000000000	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	100	000000000	00000
M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	100	000000000	00000
M5 × 0.8 mm	8 mm	4 mm	DIN 934	50	000000000	00000
M6 × 0.75 mm	10 mm	5 mm	DIN 934	1	000000000	0000
M6 × 1 mm	10 mm	5 mm	DIN 934	25	000000000	00000
M7 × 1 mm	11 mm	5.5 mm	DIN 934	10	000000000	0000
M8 × 1 mm	13 mm	6.5 mm	DIN 934	5	000000000	00000
M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	10	000000000	0000
M10 × 1 mm	17 mm	8 mm	DIN 934	5	000000000	00000
M10 × 1.5 mm	17 mm	8 mm	DIN 934	10	000000000	00000
M12 × 1 mm	19 mm	10 mm	DIN 934	1	000000000	00000
M12 × 1.75 mm	19 mm	10 mm	DIN 934	5	000000000	00000
M14 × 1.5 mm	22 mm	11 mm	DIN 934	1	000000000	0000
M14 × 2 mm	22 mm	11 mm	DIN 934	5	000000000	00000
M16 × 1.5 mm	24 mm	13 mm	DIN 934	1	000000000	0000
M16 × 2 mm	24 mm	13 mm	DIN 934	1	000000000	0000
M18 × 1.5 mm	27 mm	15 mm	DIN 934	1	000000000	00000
M18 × 2.5 mm	27 mm	15 mm	DIN 934	1	000000000	0000
M20 × 1.5 mm	30 mm	16 mm	DIN 934	1	000000000	00000
M20 × 2.5 mm	30 mm	16 mm	DIN 934	1	000000000	0000
M22 × 1.5 mm	32 mm	18 mm	DIN 934	1	000000000	00000
M24 × 1.5 mm	36 mm	19 mm	DIN 934	1	000000000	00000
M24 × 2 mm	36 mm	19 mm	DIN 934	1	000000000	00000
M24 × 3 mm	36 mm	19 mm	DIN 934	1	000000000	00000
M27 × 3 mm	41 mm	22 mm	DIN 934	1	000000000	00000
M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	000000000	00000
M33 × 3.5 mm	50 mm	26 mm	DIN 934	1	000000000	00000
M36 × 1.5 mm	55 mm	29 mm	DIN 934	1	000000000	00000

Nickel-Plated Brass



		M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	100	000000000	0000


		M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	50	000000000	0000
		M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	25	000000000	0000
		M5 × 0.8 mm	8 mm	4 mm	DIN 934	25	000000000	0000
		M6 × 1 mm	10 mm	5 mm	DIN 934	10	000000000	0000
		M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	10	000000000	0000
		M10 × 1.5 mm	17 mm	8 mm	DIN 934	5	000000000	0000

Low-Strength Steel with Material Certificate

Steel—Best for dry environments since moisture will cause these nuts to rust.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd., mm	Ht., mm	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel



	M12 × 1.75 mm	19	10	DIN 934	1	000000000	00000


	M14 × 2 mm	22	11	DIN 934	1	000000000	0000
	M16 × 2 mm	24	13	DIN 934	1	000000000	00000
	M24 × 3 mm	36	19	DIN 934	1	000000000	00000
	M30 × 3.5 mm	46	24	DIN 934	1	000000000	00000
	M36 × 4 mm	55	29	DIN 934	1	000000000	00000
	M42 × 4.5 mm	65	34	DIN 934	1	000000000	00000
	M48 × 5 mm	75	38	DIN 934	1	000000000	00000


	Steel



			M14 × 2 mm	22	11	DIN 934	1	000000000	0000


			M24 × 3 mm	36	19	DIN 934	1	000000000	00000
			M30 × 3.5 mm	46	24	DIN 934	1	000000000	00000
			M36 × 4 mm	55	29	DIN 934	1	000000000	00000
			M42 × 4.5 mm	65	34	DIN 934	1	000000000	00000
			M48 × 5 mm	75	38	DIN 934	1	000000000	00000

Plastic

Nylon 6/6— The most common plastic nuts, these are good for general purpose fastening. They are slippery and abrasion resistant, so they thread on smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so these nuts are best for dry environments.

High-Strength Glass-Filled Nylon—Glass fibers embedded in the nylon give these nuts better strength than nylon 6/6. They can also handle higher temperatures without losing strength.

Moisture-Resistant Acetal—The best plastic for damp and wet environments, these nuts won't swell or lose their strength if exposed to moisture. They also resist wear and scratches better than nylon nuts.

Clear Impact-Resistant Polycarbonate—Our most impact-resistant plastic nuts, these withstand bumps and vibration without cracking or denting. They are also clear to be less noticeable in your assembly.

Acid-Resistant PVC—Connect sensors, fittings, and other equipment in chemical-processing lines. These nuts won't degrade when exposed to harsh acids, alkalis, and alcohols.

High-Temperature Chemical-Resistant PTFE—The most chemical-resistant plastic nuts we offer, these stand up to the widest range of harsh acids, bases, solvents, and corrosive cleaners. They also keep their shape and strength at higher temperatures than most plastics.

				Temp., ° F
	Thread Size	Wd.	Ht.	Min.	Max.	Choose a Color	Pkg. Qty.		Pkg.
Nylon 6/6



		M2 × 0.4 mm	3.9 mm	1.2 mm	-40	185	Black , Off-White	100	000000000	000000


		M2.5 × 0.45 mm	4.9 mm	1.8 mm	-40	185	Black , Off-White	100	000000000	00000
		M3 × 0.5 mm	5.4 mm	2.2 mm	-40	185	Black , Off-White	100	000000000	00000
		M3.5 × 0.6 mm	6.9 mm	2.7 mm	-40	185	Black , Off-White	100	000000000	00000
		M4 × 0.7 mm	6.9 mm	3 mm	-40	185	Black , Off-White	100	000000000	00000
		M5 × 0.8 mm	7.9 mm	4.3 mm	-40	185	Black , Off-White	100	000000000	00000
		M6 × 1 mm	10 mm	5.4 mm	-40	185	Black , Off-White	100	000000000	00000
		M8 × 1.25 mm	12.9 mm	6.4 mm	-40	185	Black , Off-White	50	000000000	00000
		M10 × 1.5 mm	14.8 mm	9.8 mm	-40	185	Black , Off-White	50	000000000	00000
		M12 × 1.75 mm	17.74 mm	10.54 mm	-40	185	Black , Off-White	10	000000000	00000
		M16 × 2 mm	24 mm	14.8 mm	-40	185	Black , Off-White	10	000000000	00000


		High-Strength Glass-Filled Nylon



				6-32	5/16"	1/8"	-20	230	Off-White	10	000000000	0000


				8-32	11/32"	9/64"	-20	230	Off-White	10	000000000	0000
				10-32	3/8"	9/64"	-20	230	Off-White	10	000000000	0000
				1/4"-20	7/16"	15/64"	-20	230	Off-White	10	000000000	0000
				M2 × 0.4 mm	3.9 mm	1.2 mm	-20	230	Off-White	10	000000000	00000
				M3 × 0.5 mm	5.4 mm	2.2 mm	-20	230	Off-White	25	000000000	00000
				M4 × 0.7 mm	6.9 mm	3 mm	-20	230	Off-White	10	000000000	0000
				M5 × 0.8 mm	7.9 mm	4.3 mm	-20	230	Off-White	10	000000000	0000
				M6 × 1 mm	10 mm	5.4 mm	-20	230	Off-White	10	000000000	00000
				M8 × 1.25 mm	12.9 mm	6.4 mm	-20	230	Off-White	10	000000000	00000
				M10 × 1.5 mm	14.8 mm	9.8 mm	-20	230	Off-White	10	000000000	00000


				Moisture-Resistant Acetal



						1/4"-20	7/16"	15/64"	Not Rated	Not Rated	White	50	000000000	00000


						5/16"-18	33/64"	17/64"	Not Rated	Not Rated	White	25	000000000	00000
						3/8"-16	9/16"	21/64"	Not Rated	Not Rated	White	25	000000000	00000
						1/2"-13	49/64"	7/16"	Not Rated	Not Rated	White	10	000000000	00000


						Clear Impact-Resistant Polycarbonate



								1/4"-20	27/64"	15/64"	Not Rated	210	Clear	10	000000000	0000


								M2 × 0.4 mm	3.9 mm	1.2 mm	-40	210	Clear	10	000000000	0000
								M2.5 × 0.45 mm	4.9 mm	1.8 mm	-40	210	Clear	10	000000000	0000
								M3 × 0.5 mm	5.4 mm	2.2 mm	-40	210	Clear	25	000000000	00000
								M4 × 0.7 mm	6.9 mm	3 mm	-40	210	Clear	10	000000000	0000
								M5 × 0.8 mm	7.9 mm	4.3 mm	-40	210	Clear	10	000000000	0000
								M6 × 1 mm	10 mm	5.4 mm	-40	210	Clear	10	000000000	00000
								M8 × 1.25 mm	12.9 mm	6.4 mm	-40	210	Clear	10	000000000	00000
								M10 × 1.5 mm	14.8 mm	9.8 mm	-40	210	Clear	10	000000000	00000
M12 × 1.75 mm								17.74 mm	10.54 mm	-40	210	Clear	5	000000000	0000


Acid-Resistant PVC



								1/4"-20	15/32"	7/32"	Not Rated	Not Rated	Gray	10	000000000	00000


								5/16"-18	17/32"	17/64"	Not Rated	Not Rated	Gray	10	000000000	00000
								3/8"-16	19/32"	21/64"	Not Rated	Not Rated	Gray	10	000000000	00000
								1/2"-13	25/32"	7/16"	Not Rated	Not Rated	Gray	1	000000000	0000
								5/8"-11	29/32"	35/64"	Not Rated	Not Rated	Gray	1	000000000	0000
								3/4"-10	1 1/32"	41/64"	Not Rated	Not Rated	Gray	1	000000000	0000


								High-Temperature Chemical-Resistant PTFE



		2-56	3/16"							1/16"	Not Rated	500	White	1	000000000	0000


		1/4"-20	7/16"							7/32"	Not Rated	500	White	1	000000000	0000
		5/16"-18	1/2"							17/64"	Not Rated	500	White	1	000000000	0000
		3/8"-16	9/16"							21/64"	Not Rated	500	White	1	000000000	0000
		3/8"-24	9/16"							21/64"	Not Rated	500	White	1	000000000	0000
		1/2"-13	3/4"							7/16"	Not Rated	500	White	1	000000000	0000
		1/2"-20	3/4"							7/16"	Not Rated	500	White	1	000000000	00000
		5/8"-11	7/8"							35/64"	Not Rated	500	White	1	000000000	00000
		3/4"-10	1 1/8"							41/64"	Not Rated	500	White	1	000000000	00000
		M3 × 0.5 mm	5.32 mm							2.2 mm	Not Rated	500	White	1	000000000	0000
		M4 × 0.7 mm	6.78 mm							2.9 mm	Not Rated	500	White	1	000000000	0000


		M5 × 0.8 mm	7.78 mm							4.4 mm	Not Rated	500	White	1	000000000	0000
		M6 × 1 mm	9.78 mm							4.9 mm	Not Rated	500	White	1	000000000	0000
		M8 × 1.25 mm	12.73 mm							6.4 mm	Not Rated	500	White	1	000000000	0000

Fiberglass

Fiberglass—With the best strength-to-weight ratio of all our non-metal hex nuts, these hold up in high-stress applications without adding weight to your assembly. They resist acids, solvents, oil, and salt water.

	Wd.	Ht.	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
Fiberglass



	4-40	1/4"	3/32"	190	Gray	10	000000000	000000


	6-32	5/16"	7/64"	190	Gray	10	000000000	00000
	8-32	3/8"	1/8"	190	Gray	10	000000000	00000
	10-24	3/8"	1/8"	190	Gray	10	000000000	00000
	10-32	3/8"	1/8"	190	Gray	10	000000000	00000
	1/4"-20	7/16"	7/32"	190	Gray	5	000000000	0000
	1/4"-28	7/16"	7/32"	190	Gray	5	000000000	0000
	5/16"-18	1/2"	17/64"	190	Gray	5	000000000	0000
	5/16"-24	1/2"	17/64"	190	Gray	5	000000000	0000
	3/8"-16	9/16"	21/64"	190	Gray	5	000000000	0000
	3/8"-24	9/16"	21/64"	190	Gray	5	000000000	0000


	1/2"-13	3/4"	7/16"	190	Gray	5	000000000	0000
	1/2"-20	3/4"	7/16"	190	Gray	5	000000000	0000
	5/8"-11	15/16"	35/64"	190	Gray	5	000000000	00000
	5/8"-18	15/16"	35/64"	190	Gray	5	000000000	00000
	3/4"-10	1 1/8"	41/64"	190	Gray	5	000000000	00000
	3/4"-16	1 1/8"	41/64"	190	Gray	5	000000000	00000
	7/8"-9	1 5/16"	25/32"	190	Gray	1	000000000	0000
	1"-8	1 1/2"	55/64"	190	Gray	1	000000000	0000
	1"-12	1 1/2"	55/64"	190	Gray	5	000000000	00000
	1"-14	1 1/2"	55/64"	190	Gray	5	000000000	00000

Lightweight Aluminum with Material Certificate

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
6061 Aluminum



	2-56	3/16"	1/16"	ASME B18.6.3	10	000000000	000000


	1/2"-20	3/4"	7/16"	ASME B18.2.2	5	000000000	00000

Brass with Material Certificate

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Brass



	5/16"-24	1/2"	17/64"	25	000000000	000000

Bronze with Material Certificate

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Silicon Bronze



	5/8"-11	15/16"	35/64"	5	000000000	000000


	1 1/4"-7	1 7/8"	1 1/16"	1	000000000	00000

Medium-Strength Steel with Material Certificate

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M20 × 2 mm	30	16	ISO Class 8	DIN 934	1	000000000	00000

Mil. Spec. Hex Nuts

These nuts are manufactured and tested to strict U.S. military standards for material and construction.

Medium-Strength Steel

Image of Product. Front orientation. Hex Nuts. Mil. Spec. Hex Nuts.

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Cadmium Yellow-Chromate-Plated Steel— The plating creates a barrier against rust, so these nuts are suitable for most wet and outdoor environments. They also thread on smoothly without sticking.

	Wd.	Ht.	Mil. Spec.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Cadmium Yellow-Chromate-Plated Steel



	1/4"-20	7/16"	7/32"	MS51967-2	SAE Grade 5	Fed. Spec. FF-N-836	25	000000000	000000


	1/4"-28	7/16"	7/32"	MS51968-2	SAE Grade 5	Fed. Spec. FF-N-836	25	000000000	00000
	5/16"-18	1/2"	17/64"	MS51967-5	SAE Grade 5	Fed. Spec. FF-N-836	25	000000000	00000
	5/16"-24	1/2"	17/64"	MS51968-5	SAE Grade 5	Fed. Spec. FF-N-836	25	000000000	00000
	3/8"-16	9/16"	21/64"	MS51967-8	SAE Grade 5	Fed. Spec. FF-N-836	10	000000000	0000
	3/8"-24	9/16"	21/64"	MS51968-8	SAE Grade 5	Fed. Spec. FF-N-836	10	000000000	0000
	7/16"-14	11/16"	3/8"	MS51967-11	SAE Grade 5	Fed. Spec. FF-N-836	5	000000000	0000
	7/16"-20	11/16"	3/8"	MS51968-11	SAE Grade 5	Fed. Spec. FF-N-836	10	000000000	00000
	1/2"-13	3/4"	7/16"	MS51967-14	SAE Grade 5	Fed. Spec. FF-N-836	10	000000000	00000
	1/2"-20	3/4"	7/16"	MS51968-14	SAE Grade 5	Fed. Spec. FF-N-836	10	000000000	00000
	9/16"-12	7/8"	31/64"	MS51967-17	SAE Grade 5	Fed. Spec. FF-N-836	5	000000000	00000


	5/8"-11	15/16"	35/64"	MS51967-20	SAE Grade 5	Fed. Spec. FF-N-836	5	000000000	00000
	5/8"-18	15/16"	35/64"	MS51968-20	SAE Grade 5	Fed. Spec. FF-N-836	5	000000000	00000
	3/4"-10	1 1/8"	41/64"	MS51967-23	SAE Grade 5	Fed. Spec. FF-N-836	1	000000000	0000
	3/4"-16	1 1/8"	41/64"	MS51968-23	SAE Grade 5	Fed. Spec. FF-N-836	5	000000000	00000

High-Strength Steel

	Wd.	Ht.	Mil. Spec.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel



	1/4"-20	7/16"	7/32"	MS51967-3	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	00000


	1/4"-28	7/16"	7/32"	MS51968-3	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
	5/16"-18	1/2"	17/64"	MS51967-6	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
	5/16"-24	1/2"	17/64"	MS51968-6	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
	3/8"-16	9/16"	21/64"	MS51967-9	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	3/8"-24	9/16"	21/64"	MS51968-9	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	7/16"-14	11/16"	3/8"	MS51967-12	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	7/16"-20	11/16"	3/8"	MS51968-12	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	1/2"-13	3/4"	7/16"	MS51967-15	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	1/2"-20	3/4"	7/16"	MS51968-15	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	9/16"-18	7/8"	31/64"	MS51968-18	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000


	5/8"-11	15/16"	35/64"	MS51967-21	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	00000
	5/8"-18	15/16"	35/64"	MS51968-21	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
	3/4"-10	1 1/8"	41/64"	MS51967-24	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	00000
	3/4"-16	1 1/8"	41/64"	MS51968-24	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	00000


	Cadmium Yellow-Chromate-Plated Steel



			1/4"-20	7/16"	7/32"	MS51967-3	SAE Grade 8	Fed. Spec. FF-N-836	25	000000000	00000


			1/4"-28	7/16"	7/32"	MS51968-3	SAE Grade 8	Fed. Spec. FF-N-836	25	000000000	00000
			5/16"-18	1/2"	17/64"	MS51967-6	SAE Grade 8	Fed. Spec. FF-N-836	25	000000000	00000
			5/16"-24	1/2"	17/64"	MS51968-6	SAE Grade 8	Fed. Spec. FF-N-836	25	000000000	00000
			3/8"-16	9/16"	21/64"	MS51967-9	SAE Grade 8	Fed. Spec. FF-N-836	10	000000000	0000
			3/8"-24	9/16"	21/64"	MS51968-9	SAE Grade 8	Fed. Spec. FF-N-836	10	000000000	0000
			7/16"-14	11/16"	3/8"	MS51967-12	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
			7/16"-20	11/16"	3/8"	MS51968-12	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
			1/2"-13	3/4"	7/16"	MS51967-15	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
			1/2"-20	3/4"	7/16"	MS51968-15	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000
			9/16"-18	7/8"	31/64"	MS51968-18	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	0000


			5/8"-11	15/16"	35/64"	MS51967-21	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	00000
			5/8"-18	15/16"	35/64"	MS51968-21	SAE Grade 8	Fed. Spec. FF-N-836	5	000000000	00000
			3/4"-10	1 1/8"	41/64"	MS51967-24	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000
			3/4"-16	1 1/8"	41/64"	MS51968-24	SAE Grade 8	Fed. Spec. FF-N-836	1	000000000	0000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Mil. Spec.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	2"-4 1/2	3"	1 23/32"	MIL-DTL-1222	SAE Grade 2	1	000000000	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	7/16"	3/16"	MS35649-2254	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	000000000	00000


	1/4"-28	7/16"	3/16"	MS35650-3254	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000
	1/4"-28	7/16"	7/32"	MS51972-1	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	000000000	0000
	5/16"-18	9/16"	7/32"	MS35649-2314	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000
	5/16"-24	1/2"	17/64"	MS51972-2	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000
	3/8"-16	5/8"	1/4"	MS35649-2384	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000
	3/8"-24	9/16"	21/64"	MS51972-3	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000
	1/2"-13	3/4"	7/16"	MS51971-5	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	000000000	0000
	1/2"-20	3/4"	7/16"	MS51972-5	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	000000000	0000
	5/8"-11	15/16"	35/64"	MS51971-7	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	000000000	0000
	3/4"-10	1 1/8"	41/64"	MS51971-8	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	000000000	0000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	7/16"	7/32"	MS51971-1	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	000000000	00000


	5/16"-18	1/2"	17/64"	MS51971-2	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	000000000	0000
	3/8"-16	9/16"	21/64"	MS51971-3	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	000000000	0000

Hex Nut Assortments

With a range of sizes on hand, you can use these assortments to fasten a variety of machinery and equipment.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

SAE Grade 5—These nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

SAE Grade 8—These nuts are about 25% stronger than SAE Grade 5 nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

	No. of Pieces	Specs. Met	Container Type		Each
Zinc-Yellow-Chromate-Plated Steel SAE Grade 8



	1/4"-20 to 3/4"-10	90	—	Plastic Box	000000000	000000


	Zinc-Plated Steel SAE Grade 5



			1/4"-20 to 3/4"-10	90	—	Plastic Box	000000000	00000


			Zinc-Plated Steel ISO Class 6, ISO Class 8



					M3 to M20	720	DIN 934	Plastic Box	000000000	000000


					18-8 Stainless Steel



							1/4"-20 to 3/4"-10	90	—	Plastic Box	000000000	00000


							M2 to M12	600	DIN 934	Plastic Box	000000000	000000

Heavy-Profile Hex Nuts

About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.

Corrosion-Resistant Nickel

	Wd.	Ht.	Pkg. Qty.		Pkg.
400 Nickel



	1/2"-13	7/8"	31/64"	1	000000000	000000


	5/8"-11	1 1/16"	39/64"	1	000000000	00000
	3/4"-10	1 1/4"	47/64"	1	000000000	00000

JIS Hex Nuts

Fasten parts and components that are made to Japanese Industrial Standards.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	JIS Specification	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M3 × 0.5 mm	5.5	2.4	ISO Class 8	JIS B 1181	100	000000000	000000


	M4 × 0.7 mm	7	3.2	ISO Class 8	JIS B 1181	100	000000000	00000
	M5 × 0.8 mm	8	4	ISO Class 8	JIS B 1181	100	000000000	00000
	M6 × 1 mm	10	5	ISO Class 8	JIS B 1181	50	000000000	00000
	M8 × 1.25 mm	12	6.5	ISO Class 8	JIS B 1181	25	000000000	00000
	M10 × 1.25 mm	14	8	ISO Class 8	JIS B 1181	10	000000000	00000
	M10 × 1.5 mm	14	8	ISO Class 8	JIS B 1181	5	000000000	0000
	M12 × 1.25 mm	17	10	ISO Class 8	JIS B 1181	5	000000000	0000


	Zinc-Yellow-Chromate-Plated Steel



			M3 × 0.5 mm	5.5	2.4	ISO Class 8	JIS B 1181	50	000000000	0000


			M4 × 0.7 mm	7	3.2	ISO Class 8	JIS B 1181	50	000000000	0000
			M5 × 0.8 mm	8	4	ISO Class 8	JIS B 1181	50	000000000	0000
			M6 × 1 mm	10	5	ISO Class 8	JIS B 1181	25	000000000	0000
			M8 × 1.25 mm	12	6.5	ISO Class 8	JIS B 1181	10	000000000	0000
			M10 × 1.25 mm	14	8	ISO Class 8	JIS B 1181	5	000000000	0000
			M10 × 1.5 mm	14	8	ISO Class 8	JIS B 1181	5	000000000	0000
			M12 × 1.25 mm	17	10	ISO Class 8	JIS B 1181	5	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm	JIS Specification	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M3 × 0.5 mm	5.5	2.4	JIS B 1181	50	000000000	000000


	M4 × 0.7 mm	7	3.2	JIS B 1181	50	000000000	00000
	M5 × 0.8 mm	8	4	JIS B 1181	50	000000000	00000
	M6 × 1 mm	10	5	JIS B 1181	25	000000000	00000
	M8 × 1.25 mm	12	6.5	JIS B 1181	10	000000000	00000
	M10 × 1.25 mm	14	8	JIS B 1181	5	000000000	00000
	M12 × 1.75 mm	17	7	JIS B 1181	1	000000000	00000
	M14 × 2 mm	19	8	JIS B 1181	1	000000000	00000
	M16 × 2 mm	22	10	JIS B 1181	1	000000000	00000
	M18 × 2.5 mm	24	11	JIS B 1181	1	000000000	00000
	M20 × 2.5 mm	27	12	JIS B 1181	1	000000000	00000


	M22 × 2.5 mm	30	13	JIS B 1181	1	000000000	00000

Narrow-Profile Hex Nuts

When you have limited space for tightening with a wrench, use these nuts. Since they’re about 20% narrower, they fit in tight spots where standard-profile nuts won't fit. Also known as small-pattern hex nuts.

Brass

	Wd.	Ht.	Pkg. Qty.		Pkg.
Brass



	0-80	3/32"	3/64"	10	000000000	000000


	1-72	7/64"	1/16"	10	000000000	00000