Wrench-Driven Rivet Nut Tools
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
| For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Type | For Rivet Nut Material | Each | |
| 3/8"-16, 3/8"-24 | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 96349A509 | 000000 |
Single-Size Air-Powered Rivet Nut Tools
Use compressed air to install rivet nuts with less effort than manual tools. Tailored to specific thread sizes, these tools rotate a rivet nut with the exact force needed to collapse it onto your workpiece. They’re smaller and lighter than other powered rivet nut tools, so you can squeeze them into tighter spaces. However, they generate less force, so they’re not recommended for installing nuts into thick materials.
Air Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size  | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Includes | Each | |
Pistol Grip | |||||||||||
| 3/8"-24 | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 90 to 110 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 94675A021 | 0000000 |
| For Thread Size | Each | |
| 3/8"-24 | 94675A422 | 00000 |
| For Thread Size | Includes | Each | |
| 3/8"-24 | Bearing Set, Hex Drive, Mandrel, Nose Cone | 94675A081 | 0000000 |
Air-Powered Rivet Nut Tools
Install any size or style of rivet nut with a single tool. When you connect these tools to your compressed air line, the hydraulic fluid inside is pressurized, which generates the force needed to collapse a rivet nut. They’re also known as hydropneumatic rivet nut tools. Rather than rotating the rivet nut, like single-size rivet nut tools, these tools pull it straight back. This means you can adjust the pull force or stroke depth to match your application. Set the pull force if you’re installing rivet nuts into workpieces with different thicknesses. Set the stroke depth to install rivet nuts in soft or fragile materials without cracking or warping the surface.
Use tools with a 7,190 lb. pulling force to install rivet nuts made from hard materials, such as titanium. They’re also good for large nut sizes. However, they take about three times longer to install a nut than tools with a 3,960 lb. pulling force.
Body | Air Connection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pulling Force, lbs. | For Thread Size (For Rivet Nut Body Type) | Dia. | Wd. | Head Lg. | Overall Ht. | Max. Stroke Lg. | Rivet Nut Tool Cycle Time | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Features | Includes | Each | |
| 3,960 | 4-40 to 3/8"-24, M4 to M10 (Smooth, Ribbed, Sleeve)—For Aluminum, Stainless Steel, Steel 4-40 to 5/16"-24, M4 to M8 (Hex)—For Aluminum, Stainless Steel, Steel 8-32 to 3/8"-16, M4 to M10 (Stud)—For Aluminum, Stainless Steel, Steel | 3 3/4" | 1 1/16" | 9 5/8" | 10 3/4" | 0.275" | 1.5 Seconds/Rivet Nut | 75 to 100 | 1/4 | NPT | 3 1/2 | Adjustable Pull Force Adjustable Stroke Depth Rubber Bottom | Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 × 1.25 mm sizes | 92894A700 | 000000000 |
| 7,190 | 8-32 to 1/2"-13, M4 to M12 (Smooth, Ribbed, Hex, Sleeve, Stud)—For Aluminum, Stainless Steel, Steel 10-24 to 5/16"-18, M5 to M8 (Smooth, Ribbed, Hex, Sleeve, Stud)—For Titanium | 5 1/8" | 1 1/16" | 10 1/4" | 12 5/8" | 0.39" | 4-5 Seconds/Rivet Nut | 75 to 100 | 1/4 | NPT | 7 | Adjustable Pull Force Adjustable Stroke Depth Rubber Bottom | Nosepiece assembly for 1/4"-20 size, Carrying Case | 92894A911 | 00000000 |
| For Thread Size | Each | |
For 3,960 lbs. Pulling Force | ||
|---|---|---|
| 4-40 | 92894A111 | 0000000 |
| 8-32 | 92894A550 | 000000 |
| 10-24 | 92894A560 | 000000 |
| 10-32 | 92894A570 | 000000 |
| 1/4"-20 | 92894A580 | 000000 |
| 1/4"-28 | 92894A112 | 000000 |
| 5/16"-18 | 92894A600 | 000000 |
| 5/16"-24 | 92894A113 | 000000 |
| 3/8"-16 | 92894A620 | 000000 |
| 3/8"-24 | 92894A114 | 000000 |
| M4 × 0.7 mm | 92894A810 | 000000 |
| M5 × 0.8 mm | 92894A820 | 000000 |
| M6 × 1 mm | 92894A830 | 000000 |
| M8 × 1.25 mm | 92894A840 | 000000 |
| M10 × 1.5 mm | 92894A850 | 000000 |
For 7,190 lbs. Pulling Force | ||
| 8-32 | 92894A917 | 00000 |
| 10-24 | 92894A918 | 00000 |
| 10-32 | 92894A919 | 00000 |
| 1/4"-20 | 92894A921 | 00000 |
| 1/4"-28 | 92894A922 | 00000 |
| 5/16"-18 | 92894A923 | 00000 |
| 5/16"-24 | 92894A924 | 00000 |
| 3/8"-16 | 92894A925 | 00000 |
| 3/8"-24 | 92894A926 | 00000 |
| 1/2"-13 | 92894A928 | 00000 |
| M4 × 0.7 mm | 92894A912 | 00000 |
| M5 × 0.8 mm | 92894A913 | 00000 |
| M6 × 1 mm | 92894A914 | 00000 |
| M8 × 1.25 mm | 92894A915 | 00000 |
| M10 × 1.5 mm | 92894A916 | 00000 |
| M12 × 1.75 mm | 92894A927 | 00000 |
| Includes | Each | |
| Hex Key Wrench, Pin-Removal Punch, Spanner Wrench | 92894A711 | 000000 |
Hand-Driven Tools for Low-Profile Rivet Nuts
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Overall Lg. | Each | |
| 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M3, M4, M5, M6, M8, M10 | Sleeve | 18-8 Stainless Steel, Aluminum, Steel | 5 7/8" | 98590A100 | 000000 |
| For Thread Size | Each | |
| 4-40 | 98590A210 | 000000 |
| 6-32 | 98590A220 | 00000 |
| 8-32 | 98590A230 | 00000 |
| 10-24 | 98590A240 | 00000 |
| 10-32 | 98590A250 | 00000 |
| 12-24 | 98590A255 | 00000 |
| 1/4"-20 | 98590A260 | 00000 |
| 1/4"-28 | 98590A270 | 00000 |
| 5/16"-18 | 98590A280 | 00000 |
| 5/16"-24 | 98590A285 | 00000 |
| 3/8"-16 | 98590A290 | 00000 |
| 3/8"-24 | 98590A300 | 00000 |
| M3 × 0.5 mm | 98590A310 | 00000 |
| M4 × 0.7 mm | 98590A320 | 00000 |
| M5 × 0.8 mm | 98590A330 | 00000 |
| M6 × 1 mm | 98590A340 | 00000 |
| M8 × 1.25 mm | 98590A350 | 00000 |
| M10 × 1.5 mm | 98590A360 | 00000 |
Pull Force Calibrators for Rivet Nut Tools
Avoid failed rivet nuts by periodically testing the pull force of your rivet nut tool. These calibrators work with air-powered and hydraulic/air-powered rivet nut tools. They display force measurements on two digital touch screens. The left screen shows a graph and read-out of current pulling force, while the right screen shows the results of the last seven tests. Track performance to plan maintenance—they store test data on the included microSD card.
An anvil and mandrel assembly (sold separately) is required. Choose a thread size that matches your tool. Thread the anvil and mandrel assembly onto the calibrator to begin testing.
| For Thread Size | Capacity | Accuracy | Measuring Increments | Ht. | Wd. | Dp. | Housing Material | Electrical Connection Type | Cord Lg., ft. | Includes | Each | |
| 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 1/2"-13, M4, M5, M6, M8, M10, M12 | 11,000 lbs. (English) 5,000 kg (Metric) 50,000 N (Newtons) | ±3% | 1 lbs. (English) 1 kg (Metric) 1 N (Newtons) | 6 3/8" | 8 1/4" | 9 3/4" | Plastic | Plug | 3 | microSD Card, microSD Card Reader, USB Power Adapter | 8068N101 | 000000000 |
| For Thread Size | Each | |
| 6-32 | 8068N102 | 0000000 |
| 8-32 | 8068N103 | 000000 |
| 10-24 | 8068N104 | 000000 |
| 10-32 | 8068N105 | 000000 |
| 1/4"-20 | 8068N106 | 000000 |
| 1/4"-28 | 8068N107 | 000000 |
| 5/16"-18 | 8068N108 | 000000 |
| 5/16"-24 | 8068N109 | 000000 |
| 3/8"-16 | 8068N111 | 000000 |
| 3/8"-24 | 8068N112 | 000000 |
| 1/2"-13 | 8068N113 | 000000 |
| M4 × 0.7 mm | 8068N114 | 000000 |
| M5 × 0.8 mm | 8068N115 | 000000 |
| M6 × 1 mm | 8068N116 | 000000 |
| M8 × 1.25 mm | 8068N117 | 000000 |
| M10 × 1.5 mm | 8068N118 | 000000 |
| M12 × 1.75 mm | 8068N119 | 000000 |