About Nuts, Materials, and Finishes
More
Steel Twist-Resistant Rivet Nuts
Made of steel, these rivet nuts add strong, reusable threads to sheet metal and other material that’s too thin to tap. Their ribbed body grips material better than smooth-body rivet nuts, so they won't twist when you tighten a screw. Also known as blind inserts, they can be installed when you have access to only one side of the material. With a zinc yellow-chromate plating, these nuts resist corrosion in wet environments.
Install these nuts in a drilled or punched round hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | |||||||||||
| 6-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.420" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 00000 |
| 6-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.265" | 0.470" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.420" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 0000 |
| 8-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.265" | 0.470" | 0.305" | 0.390" | 0.030" | 25 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.475" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 0000 |
| 10-24 | 19/64" | 0.130" to 0.225" | Ribbed | 0.296" | 0.585" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 0000 |
| 10-32 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.475" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 0000 |
| 10-32 | 19/64" | 0.130" to 0.225" | Ribbed | 0.296" | 0.585" | 0.315" | 0.415" | 0.030" | 25 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.390" | 0.580" | 0.380" | 0.500" | 0.030" | 25 | 000000000 | 00000 |
| 1/4"-20 | 25/64" | 0.165" to 0.260" | Ribbed | 0.390" | 0.680" | 0.380" | 0.500" | 0.030" | 25 | 000000000 | 00000 |
| 1/4"-28 | 25/64" | 0.027" to 0.165" | Ribbed | 0.390" | 0.580" | 0.380" | 0.500" | 0.030" | 25 | 000000000 | 00000 |
| 1/4"-28 | 25/64" | 0.165" to 0.260" | Ribbed | 0.390" | 0.680" | 0.380" | 0.500" | 0.030" | 25 | 000000000 | 00000 |
| 5/16"-18 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 5/16"-24 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 5/16"-24 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | 25 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 000000000 | 00000 |
| 3/8"-24 | 17/32" | 0.027" to 0.150" | Ribbed | 0.530" | 0.690" | 0.470" | 0.685" | 0.035" | 10 | 000000000 | 0000 |
| 3/8"-24 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 0.805" | 0.425" | 0.685" | 0.035" | 10 | 000000000 | 00000 |
| 1/2"-13 | 11/16" | 0.063" to 0.200" | Ribbed | 0.685" | 1.150" | 0.850" | 0.865" | 0.047" | 10 | 000000000 | 00000 |
| 1/2"-13 | 11/16" | 0.200" to 0.350" | Ribbed | 0.685" | 1.300" | 0.850" | 0.865" | 0.047" | 10 | 000000000 | 00000 |
| 1/2"-13 | 11/16" | 0.350" to 0.500" | Ribbed | 0.685" | 1.450" | 0.860" | 0.865" | 0.047" | 10 | 000000000 | 00000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| M4 | 0.7 | 6.8 mm | 0.5 to 2 | Ribbed | 6.7 | 10.7 | 7.8 | 9.9 | 0.8 | 25 | 000000000 | 00000 |
| M4 | 0.7 | 6.8 mm | 2 to 3.3 | Ribbed | 6.7 | 11.9 | 7.8 | 9.9 | 0.8 | 25 | 000000000 | 0000 |
| M5 | 0.8 | 7.6 mm | 0.5 to 3.3 | Ribbed | 7.5 | 12.1 | 8 | 10.5 | 0.8 | 25 | 000000000 | 0000 |
| M5 | 0.8 | 7.6 mm | 3.3 to 5.7 | Ribbed | 7.5 | 14.9 | 8 | 10.5 | 0.8 | 25 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 0.7 to 4.2 | Ribbed | 9.9 | 14.7 | 9.7 | 12.7 | 0.8 | 25 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 4.2 to 6.6 | Ribbed | 9.9 | 17.3 | 9.7 | 12.7 | 0.8 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.5 | 17.5 | 11.9 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 20.5 | 10.8 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M10 | 1.5 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.5 | 17.5 | 11.9 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M10 | 1.5 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 20.5 | 10.8 | 17.4 | 0.9 | 10 | 000000000 | 00000 |
| M12 | 1.75 | 17.5 mm | 1.6 to 5.1 | Ribbed | 17.4 | 29.2 | 21.6 | 22 | 1.2 | 10 | 000000000 | 00000 |
| M12 | 1.75 | 17.5 mm | 5.1 to 8.9 | Ribbed | 17.4 | 33 | 21.6 | 22 | 1.2 | 10 | 000000000 | 00000 |
| M12 | 1.75 | 17.5 mm | 8.9 to 12.7 | Ribbed | 17.4 | 36.8 | 21.8 | 22 | 1.2 | 5 | 000000000 | 00000 |
Twist-Resistant Rivet Nuts for Soft Materials
A ribbed body and wedges under the flange bite into soft materials such as brass, aluminum, and composites to prevent spinning when you tighten a screw. These rivet nuts create permanent threads in sheet metal and other surfaces that are too thin to be tapped. Installation requires access to just one side of your material. The flange distributes the load and holds the nut against the surface. All resist rusting in wet environments.
Install them in a drilled or punched round hole with a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| M5 | 0.8 | 7.6 mm | 0.5 to 3.3 | Ribbed | 7.5 | 12 | 8 | 10.5 | 0.7 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 7.6 mm | 3.3 to 5.7 | Ribbed | 7.5 | 14.8 | 8 | 10.5 | 0.7 | 25 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 0.7 to 4.2 | Ribbed | 9.9 | 14.7 | 9.6 | 12.7 | 0.7 | 25 | 000000000 | 00000 |
| M6 | 1 | 10 mm | 4.2 to 6.6 | Ribbed | 9.9 | 17.2 | 9.6 | 12.7 | 0.7 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.4 | 17.5 | 11.9 | 17.4 | 0.8 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.4 | 20.4 | 10.8 | 17.4 | 0.8 | 10 | 000000000 | 0000 |
Rivet Nuts for Plastic and Composites
Add strong, permanent threads to plastic and composites. As you install these rivet nuts, a large backside flange forms to distribute loads across a broad area. Installation requires access to only one side of your material. Secure them in a drilled or punched round hole in thin surfaces with a rivet nut tool. Made of zinc yellow-chromate-plated steel, these nuts are suitable for wet environments.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| 10-24 | R | 0.020" to 0.175" | Bulbed | 0.329" | 0.828" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 00000 |
| 10-24 | R | 0.175" to 0.320" | Bulbed | 0.329" | 0.921" | 0.410" | 0.510" | 0.038" | 4 | 5 | 000000000 | 0000 |
| 10-32 | R | 0.020" to 0.175" | Bulbed | 0.329" | 0.828" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 0000 |
| 10-32 | R | 0.175" to 0.320" | Bulbed | 0.329" | 0.921" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 00000 |
| 1/4"-20 | X | 0.020" to 0.280" | Bulbed | 0.382" | 1.000" | 0.505" | 0.645" | 0.059" | 4 | 10 | 000000000 | 0000 |
| 1/4"-20 | X | 0.280" to 0.500" | Bulbed | 0.382" | 1.234" | 0.505" | 0.645" | 0.059" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.020" to 0.280" | Bulbed | 0.495" | 1.141" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.280" to 0.500" | Bulbed | 0.495" | 1.375" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
Thread | Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | |||||||||||||
| M5 | 0.8 | R | 0.5 to 4.5 | Bulbed | 8.4 | 21 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 00000 |
| M5 | 0.8 | R | 4.5 to 8.1 | Bulbed | 8.4 | 23.8 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 0.5 to 7.1 | Bulbed | 9.7 | 25.4 | 12.8 | 16.4 | 1.5 | 4 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 7.1 to 12.7 | Bulbed | 9.7 | 31.3 | 12.8 | 16.4 | 1.5 | 4 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 1/2" | 0.5 to 7.1 | Bulbed | 12.6 | 29 | 14.5 | 19.7 | 1.6 | 4 | 5 | 000000000 | 0000 |
| M8 | 1.25 | 1/2" | 7.1 to 12.7 | Bulbed | 12.6 | 34.9 | 14.5 | 19.7 | 1.6 | 4 | 5 | 000000000 | 0000 |
Thread-Sealing Closed-End Rivet Nuts
The closed end on these nuts keeps debris from passing through the nut or damaging the threads. As rivet nuts, they add reusable threads in material that’s too thin to tap. You only need access to one side of your material to install them, unlike press-fit nuts. They stay in place even when you tighten your screw, thanks to a ribbed body that grips the surrounding material. Made of steel, they create stronger joints in sheet metal than sheet metal screws. They’re zinc yellow-chromate plated to resist corrosion in wet environments.
Mount them in a drilled or round punched hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | |||||||||||
| 6-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.74" | 0.640" | 0.390" | 0.03" | 25 | 000000000 | 000000 |
| 8-32 | 17/64" | 0.020" to 0.080" | Ribbed | 0.265" | 0.74" | 0.640" | 0.390" | 0.03" | 25 | 000000000 | 00000 |
| 8-32 | 17/64" | 0.080" to 0.130" | Ribbed | 0.265" | 0.74" | 0.580" | 0.390" | 0.03" | 25 | 000000000 | 00000 |
| 10-24 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.99" | 0.845" | 0.415" | 0.03" | 25 | 000000000 | 00000 |
| 10-24 | 19/64" | 0.130" to 0.225" | Ribbed | 0.296" | 0.99" | 0.735" | 0.415" | 0.03" | 25 | 000000000 | 00000 |
| 10-32 | 19/64" | 0.020" to 0.130" | Ribbed | 0.296" | 0.99" | 0.845" | 0.415" | 0.03" | 25 | 000000000 | 00000 |
| 10-32 | 19/64" | 0.130" to 0.225" | Ribbed | 0.296" | 0.99" | 0.735" | 0.415" | 0.03" | 10 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.027" to 0.165" | Ribbed | 0.390" | 1.19" | 1.005" | 0.500" | 0.03" | 10 | 000000000 | 0000 |
| 1/4"-20 | 25/64" | 0.165" to 0.260" | Ribbed | 0.390" | 1.19" | 0.905" | 0.500" | 0.03" | 10 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.020" to 0.150" | Ribbed | 0.530" | 1.39" | 1.175" | 0.685" | 0.03" | 5 | 000000000 | 0000 |
| 5/16"-18 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 1.39" | 1.025" | 0.685" | 0.03" | 5 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.020" to 0.150" | Ribbed | 0.530" | 1.39" | 1.175" | 0.685" | 0.03" | 5 | 000000000 | 0000 |
| 3/8"-16 | 17/32" | 0.150" to 0.312" | Ribbed | 0.530" | 1.39" | 1.025" | 0.685" | 0.03" | 5 | 000000000 | 0000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| M5 | 0.8 | 7.6 mm | 3.3 to 5.7 | Ribbed | 7.5 | 25.2 | 18.7 | 10.5 | 0.8 | 10 | 000000000 | 00000 |
| M6 | 1 | 10 mm | 0.7 to 4.2 | Ribbed | 9.9 | 30.2 | 25.5 | 12.7 | 0.8 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 4.2 to 6.6 | Ribbed | 9.9 | 30.2 | 23 | 12.7 | 0.8 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 0.7 to 3.8 | Ribbed | 13.5 | 35.3 | 29.9 | 17.4 | 0.9 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 35.3 | 26 | 17.4 | 0.9 | 10 | 000000000 | 00000 |
| M10 | 1.5 | 13.5 mm | 3.8 to 7.9 | Ribbed | 13.5 | 35.3 | 26 | 17.4 | 0.9 | 10 | 000000000 | 00000 |
Flush-Mount Rivet Nuts
With an angled head, these rivet nuts sit flush in countersunk holes. Use them to create reusable threads in sheet metal and other surfaces that are too thin to be tapped. Installation requires access to just one side of your material. Made of steel, all have either a zinc or zinc yellow-chromate plating to resist corrosion in wet environments.
Install them in a drilled or punched countersunk hole with a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel—100° Countersink Angle | |||||||||||
| 6-32 | No. 12 | 0.065" to 0.106" | Smooth | 0.189" | 0.437" | 0.325" | 3/8" | 0.06" | 5 | 000000000 | 000000 |
| 6-32 | No. 12 | 0.106" to 0.161" | Smooth | 0.189" | 0.437" | 0.280" | 3/8" | 0.06" | 5 | 000000000 | 00000 |
| 8-32 | No. 2 | 0.065" to 0.106" | Smooth | 0.221" | 0.437" | 0.325" | 3/8" | 0.06" | 5 | 000000000 | 00000 |
| 8-32 | No. 2 | 0.106" to 0.161" | Smooth | 0.221" | 0.437" | 0.280" | 3/8" | 0.06" | 5 | 000000000 | 00000 |
| 8-32 | No. 2 | 0.161" to 0.201" | Smooth | 0.221" | 0.499" | 0.290" | 3/8" | 0.06" | 5 | 000000000 | 00000 |
| 10-32 | 1/4" | 0.065" to 0.116" | Smooth | 0.25" | 0.513" | 0.395" | 3/8" | 0.07" | 5 | 000000000 | 00000 |
| 10-32 | 1/4" | 0.116" to 0.166" | Smooth | 0.25" | 0.56" | 0.385" | 3/8" | 0.07" | 5 | 000000000 | 00000 |
| 10-32 | 1/4" | 0.166" to 0.216" | Smooth | 0.25" | 0.622" | 0.400" | 3/8" | 0.07" | 5 | 000000000 | 00000 |
| 1/4"-20 | Q | 0.089" to 0.151" | Smooth | 0.332" | 0.598" | 0.440" | 5/8" | 0.09" | 5 | 000000000 | 00000 |
| 1/4"-20 | Q | 0.151" to 0.211" | Smooth | 0.332" | 0.661" | 0.440" | 5/8" | 0.09" | 5 | 000000000 | 00000 |
| 1/4"-20 | Q | 0.211" to 0.271" | Smooth | 0.332" | 0.723" | 0.440" | 5/8" | 0.09" | 1 | 000000000 | 0000 |
| 1/4"-20 | Q | 0.271" to 0.331" | Smooth | 0.332" | 0.786" | 0.435" | 5/8" | 0.09" | 1 | 000000000 | 0000 |
| 5/16"-18 | Z | 0.106" to 0.181" | Smooth | 0.413" | 0.74" | 0.540" | 3/4" | 0.1" | 1 | 000000000 | 0000 |
| 5/16"-18 | Z | 0.181" to 0.256" | Smooth | 0.413" | 0.833" | 0.560" | 3/4" | 0.1" | 1 | 000000000 | 0000 |
| 5/16"-18 | Z | 0.256" to 0.331" | Smooth | 0.413" | 0.896" | 0.550" | 3/4" | 0.1" | 1 | 000000000 | 0000 |
| 3/8"-16 | 31/64" | 0.125" to 0.211" | Smooth | 0.49" | 0.814" | 0.580" | 3/4" | 0.12" | 1 | 000000000 | 0000 |
| 3/8"-16 | 31/64" | 0.211" to 0.296" | Smooth | 0.49" | 0.907" | 0.590" | 3/4" | 0.12" | 1 | 000000000 | 0000 |
| 3/8"-16 | 31/64" | 0.296" to 0.381" | Smooth | 0.49" | 1.001" | 0.600" | 3/4" | 0.12" | 1 | 000000000 | 0000 |
| 1/2"-13 | 5/8" | 0.125" to 0.226" | Smooth | 0.625" | 0.86" | 0.610" | 7/8" | 0.12" | 1 | 000000000 | 00000 |
| 1/2"-13 | 5/8" | 0.226" to 0.326" | Smooth | 0.625" | 0.97" | 0.620" | 7/8" | 0.12" | 1 | 000000000 | 00000 |
Twist-Resistant Rivet Nut Assortments
Everything you need to add threads to sheet metal, these assortments contain twist-resistant rivet nuts, mandrels, nosepieces, and a plier-style installation tool. The nuts have a ribbed body that grips surrounding material to hold them in place, keeping them from spinning as you tighten screws. They create reusable threads in surfaces that are too thin to be tapped. Also known as blind inserts, installation requires access to just one side of your material. The flange distributes the load and holds the nuts against the surface. All are steel with a zinc yellow-chromate plating to resist corrosion in wet environments.
To install, thread a rivet nut onto the mandrel, insert the nut into a drilled or punched round hole, and squeeze the handles to secure the nut.
| Number of Pieces | Material | Rivet Nuts Included | For Material Thick. | Includes | Container Type | Each | |
Inch | |||||||
|---|---|---|---|---|---|---|---|
| 58 | Zinc Yellow-Chromate Plated Steel | 8-32 (12 Pieces) 10-24 (12 Pieces) 10-32 (12 Pieces) 1/4"-20 (14 Pieces) | 0.02"-0.26" | Three Nosepieces Four Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 0000000 |
| 257 | Zinc Yellow-Chromate Plated Steel | 6-32 (50 Pieces) 8-32 (50 Pieces) 10-32 (50 Pieces) 1/4"-20 (50 Pieces) 5/16"-18 (25 Pieces) 3/8"-16 (25 Pieces) | 0.02"-0.165" | Six Nosepieces Six Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |
Metric | |||||||
| 57 | Zinc Yellow-Chromate Plated Steel | M4 (12 Pieces) M5 (24 Pieces) M6 (14 Pieces) | 0.5mm-6.6mm | Three Nosepieces Three Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |
| 206 | Zinc Yellow-Chromate Plated Steel | M4 (50 Pieces) M5 (50 Pieces) M6 (50 Pieces) M8 (25 Pieces) M10 (25 Pieces) | 0.5mm-4.2mm | Five Nosepieces Five Mandrels Plier-Style Installation Tool | Plastic Case | 000000000 | 000000 |