About Nuts, Materials, and Finishes
More
Steel Low-Profile Rivet Nuts
These steel low-profile rivet nuts are about twice as strong as aluminum rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium or tin-zinc plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts may be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Steel Low-Profile Rivet Nuts with Installation Tool
Everything you need to add threads to sheet metal in low-clearance areas. Along with low-profile rivet nuts, these kits include mandrels and an installation tool. As you install these nuts, the threaded portion is drawn into the sleeve, reducing how far they stick out the back of your material. They also have a flange that’s half as thick as those on other rivet nuts, so they have a low profile on both sides of your panel. A tin-zinc plating protects from rust in wet environments and reduces friction, so they collapse smoothly. These rivet nuts create permanent threads in surfaces that are too thin to be tapped. Installation requires access to just one side of your material. The flange distributes the load and holds them against the surface.
To install, thread a rivet nut onto the mandrel, insert the nut into a drilled or punched round hole, push down on the tool's T-handle, and turn clockwise.
Thread | ||||||
|---|---|---|---|---|---|---|
Size | Pitch, mm | For Material Thick., mm | Includes | No. of Nuts Included | Each | |
Tin-Zinc Plated Steel | ||||||
| M3 | 0.5 | 0.76 to 2.29 | Mandrels, Installation Tool | 100 | 000000000 | 0000000 |
Stainless Steel Low-Profile Rivet Nuts
The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals. They're often used for light duty fastening in low-clearance applications. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. The tin-plating provides lubricity allowing the nut to collapse smoothly. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts can be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Aluminum Low-Profile Rivet Nuts
These low-profile rivet nuts are one-third the weight of steel rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium or tin-zinc plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts may be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Insulating Rivet Nuts
A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration. Also known as well nuts. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Flush-Mount Rivet Nuts
With an angled head, these rivet nuts sit flush in countersunk holes. Use them to create reusable threads in sheet metal and other surfaces that are too thin to be tapped. Installation requires access to just one side of your material. Made of steel, all have either a zinc or zinc yellow-chromate plating to resist corrosion in wet environments.
Install them in a drilled or punched countersunk hole with a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material.
Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Low-Profile Rivet Nut Assortments
Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool. Rivet nuts have a cadmium plating that provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut.
| Number of Pieces | Material | Rivet Nuts Included | For Material Thick. | Includes | Container Type | Each | |
Metric | |||||||
|---|---|---|---|---|---|---|---|
| 231 | Cadmium Plated Steel | M3 (50 Pieces) M4 (50 Pieces) M5 (50 Pieces) M6 (50 Pieces) M8 (25 Pieces) | 0.03"-0.09" | Five Mandrels Installation Tool | Plastic Case | 000000000 | 0000000 |
Wrench-Driven Rivet Nut Tools
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Type | For Rivet Nut Material | Each | |
| M3 × 0.5 mm | 7/8" | 11/16" | Smooth, Ribbed, Hex, Bulbed, Sleeve | 18-8 Stainless Steel, Aluminum, Steel, Titanium | 000000000 | 000000 |
Hand-Driven Tools for Low-Profile Rivet Nuts
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Overall Lg. | Each | |
| 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M3, M4, M5, M6, M8, M10 | Sleeve | 18-8 Stainless Steel, Aluminum, Steel | 5 7/8" | 000000000 | 000000 |
| For Thread Size | Each | |
| 4-40 | 000000000 | 000000 |
| 6-32 | 000000000 | 00000 |
| 8-32 | 000000000 | 00000 |
| 10-24 | 000000000 | 00000 |
| 10-32 | 000000000 | 00000 |
| 12-24 | 000000000 | 00000 |
| 1/4"-20 | 000000000 | 00000 |
| 1/4"-28 | 000000000 | 00000 |
| 5/16"-18 | 000000000 | 00000 |
| 5/16"-24 | 000000000 | 00000 |
| 3/8"-16 | 000000000 | 00000 |
| 3/8"-24 | 000000000 | 00000 |
| M3 × 0.5 mm | 000000000 | 00000 |
| M4 × 0.7 mm | 000000000 | 00000 |
| M5 × 0.8 mm | 000000000 | 00000 |
| M6 × 1 mm | 000000000 | 00000 |
| M8 × 1.25 mm | 000000000 | 00000 |
| M10 × 1.5 mm | 000000000 | 00000 |
Air-Powered Rivet Nut Tools
Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install thin-walled bulbed, ribbed, sleeve, and smooth rivet nuts. To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.
Air Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Includes | Each | |
| M3 × 0.5 mm | Bulbed, Ribbed, Sleeve, Smooth | Aluminum, Steel | 6" | 6" | 35 to 45 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 000000000 | 0000000 |
| For Thread Size | Each | |
| M3 × 0.5 mm | 000000000 | 00000 |
| For Thread Size | Includes | Each | |
| M3 × 0.5 mm | Bearing Set, Hex Drive, Mandrel, Nose Cone | 000000000 | 0000000 |
Battery-Powered Rivet Nut Tools
Take our most powerful rivet nut tools anywhere you need. With the greatest pulling force and longest stroke of any we offer, they secure rivet nuts in place even in thick and hard material. The tools include nosepiece assemblies to install M4, M5, M6, and M8 rivet nuts (additional mandrels and nosepieces sold separately). They run on the DeWalt rechargeable battery that's already in your toolkit. As you swap between tasks, use the touch screen to set the exact force and stroke length you need to get the job done. These tools also keep count of how many rivet nuts you install, helping you keep track of high-volume work as you go. The cushioned grip minimizes fatigue for comfortable, repeated use, and the LED light illuminates dim areas and dark surfaces.
These tools have two primary settings: pull-to-stroke and pull-to-force. With the pull-to-stroke setting, you set the stroke depth based on the thickness of your material. This works best when installing a high volume of rivet nuts into the same thickness of material. With the pull-to-force setting, you set the pull force regardless of material thickness. Use this setting when installing rivet nuts in a variety of material thicknesses.
Thread your rivet nut onto the included mandrel and press the trigger to spin it on. To install it, place the nut into the material and press once again. Spin the mandrel off by pressing one more time.
Tools | Replacement Batteries | Replacement Chargers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Max. Stroke Lg. | Pulling Force, lbs. | Voltage | Batteries Included | Weight, lbs. | Includes | Each | Each | Each | |||
| 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Smooth, Ribbed, Hex, Bulbed | Aluminum, Stainless Steel, Steel | 14 1/8" | 10" | 0.335" | 4,040 | 20V DC | Yes | 5 | Nosepiece assemblies for M4, M5, M6, and M8 sizes; Extra Battery | 000000000 | 000000000 | 0000000 | 0000000 | 000000000 | 000000 |
| For Thread Size | Each | |
| 6-32 | 000000000 | 000000 |
| 8-32 | 000000000 | 00000 |
| 10-24 | 000000000 | 00000 |
| 10-32 | 000000000 | 00000 |
| 1/4"-20 | 000000000 | 00000 |
| 5/16"-18 | 000000000 | 00000 |
| 3/8"-16 | 000000000 | 00000 |
| M3 × 0.5 mm | 000000000 | 00000 |
| M4 × 0.7 mm | 000000000 | 00000 |
| M5 × 0.8 mm | 000000000 | 00000 |
| M6 × 1 mm | 000000000 | 00000 |
| M8 × 1.25 mm | 000000000 | 00000 |
| M10 × 1.5 mm | 000000000 | 00000 |
