About Installing Blind Rivets
More
Plastic Blind Rivets
Corrosion resistant and nonconductive, these rivets are designed to join plastic, fiberglass, wood, and metal. They join material when you only have access to one side. A low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
Nylon mandrel absorbs moisture which can affect dimensions and other properties. A tool for plastic blind rivets (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength  | Temperature Range, °F | Material | Color | Pkg. Qty. | Pkg. | |
0.197" Dia. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.02"-0.197" | 0.315" | 0.2"-0.204" | No. 7 | 0.445" | 0.071" | 60 | Not Rated | -25° to 175° | Nylon Plastic | Off-White | 50 | 000000000 | 000000 |
| 0.197"-0.354" | 0.472" | 0.2"-0.204" | No. 7 | 0.445" | 0.071" | 60 | Not Rated | -25° to 175° | Nylon Plastic | Off-White | 50 | 000000000 | 00000 |
| For Rivet Dia. | Each | |
| 0.157", 0.195", 0.197", 0.236", 0.246" | 000000000 | 000000 |
Blind Rivets for Wood
An alternative to wood screws, these rivets have a grooved body that expands during installation, digging into the wood and creating a secure hold. They are for use in closed-end holes. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Min. Hole Dp. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength | Tensile Strength | Material | Pkg. Qty. | Pkg. | |
Steel Mandrel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
0.197" Dia. | |||||||||||
| 0.691" | 0.591" | 0.205" | No. 5 | 0.375" | 0.063" | Not Rated | Not Rated | 5000 Series Aluminum | 50 | 000000000 | 000000 |