Locking-Collar Rivets
Also known as magna-grip lockbolts, these are the strongest rivets we offer. Consisting of a ribbed rivet and a collar (sold separately), they have the holding power to withstand excessive vibration, expansion, and contraction.
Installation requires access to both sides of the material and a locking collar rivet tool. The tool pulls the rivet to the collar, clinches it in place, and clips off any excess length.
Rivets | Collars | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Material | Pkg. Qty. | Pkg. | Flange Dia. | Flange Ht. | Pkg. Qty. | Pkg. | ||
3/16" Dia. | ||||||||||||||||
| 0.063"-0.625" | 1.875" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 00000 | 0.385" | 0.052" | 10 | 000000000 | 00000 |
| 0.313"-1.25" | 2.75" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.385" | 0.052" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||||||||||||
| 0.063"-0.625" | 2" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
| 0.313"-1.25" | 2.625" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
Tools for Locking-Collar Rivets
Install locking-collar rivets, also known as magna-grip lockbolts. These air-powered tools pull the rivet tight to the collar, clinch the collar in place, and clip off any excess length of the rivet.
A nosepiece (sold separately) is required.
Removal Tools for Locking-Collar Rivets
Remove locking-collar rivets, also called Magna-Grip lockbolts, without damaging your workpiece. Instead of breaking off the collar with a chisel, these tools attach to your drill to mill off the collar. All that's left to do is to drive the pin out with a hammer.
For a complete removal tool, you'll need a cutter and a stop (both sold separately).
Cutters thread into the stop.
