DIN 7337 Rivets | McMaster-Carr

Filter by

System of Measurement

Diameter

For Material Thickness

Material

Fastener Head Type

Length

Rivet Type

Mandrel Material

Hole Size

Specifications Met

Drill Bit Size

Head Diameter

Head Height

Countersink Angle

RoHS

Relative Domed Head Size

Tensile Strength

1,000 lbf to 1,999 lbf

REACH

Shear Strength

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Export Control Classification Number (ECCN)

Finish

80 Products

About Rivets

Learn how to install blind and solid rivets with recommended tools.

18-8 Stainless Steel Domed Head Blind Rivets

Installed

Made from 18-8 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.

Use these blind rivets to fasten hinges, shelves, or other assemblies where you can only access one side. You can also use them to join materials that are difficult to weld or solder. The back of the rivet deforms during installation, so it creates a permanent hold that won't loosen from vibration. It also means you can't overtighten or strip them.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material.

18-8 Stainless Steel Mandrel

Image of Product. Front orientation. Contains Annotated. 18-8 Stainless Steel Domed Head Blind Rivets.

ISO 15983—Blind rivets that meet ISO 15983 (formerly DIN 7337) comply with international standards for blind rivet dimensions.

	For Material Thk., mm	Lg., mm	For Hole Size, mm	For Drill Bit Size, mm	Head Dia., mm	Head Ht., mm	Shear Strength, lbf	Tensile Strength, lbf	Material	Specs. Met	Pkg. Qty.		Pkg.
3 mm Diameter



		1 to 3	6	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	50	97525A211	000000


		3 to 5	8	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	50	97525A212	00000
		5.5 to 7	10	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A213	0000
		7 to 9	12	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A214	0000
		9 to 11	14	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A215	00000
		11 to 13	16	3.1 to 3.2	3	6.5	0.8	350	440	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A216	00000


		3.2 mm Diameter



				1 to 3	6	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A217	0000


				3 to 5	8	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A218	0000
				5.5 to 7	10	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A219	0000
				7 to 9	12	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A221	00000
				9 to 11	14	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A222	00000
				11 to 13	16	3.3 to 3.4	3.2	6.5	0.8	400	510	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A223	0000


				4 mm Diameter



						1 to 2.5	6	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A224	00000


						2.5 to 4.5	8	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A251	00000
						4.5 to 6.5	10	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A226	00000
						6.5 to 8.5	12	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A227	00000
						8.5 to 10.5	14	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A228	0000
						8.5 to 12	16	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A229	00000
						12 to 16	20	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A231	0000
						16 to 21	25	4.1 to 4.2	4	8	1	560	780	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A232	0000


						4.8 mm Diameter



								2 to 4	8	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A233	0000


								4 to 6	10	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A234	00000
								6 to 8	12	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A235	0000
								8 to 10	14	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	25	97525A236	00000
								8 to 11	16	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A237	0000
								11 to 15	20	4.9 to 5	4.8	9.5	1.1	850	1,010	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A238	0000


								5 mm Diameter



										2 to 4	8	5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A239	0000


4 to 6										10	5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A241	0000
6 to 8	12									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A242	0000
8 to 10	14									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A243	0000
8 to 11	16									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A244	0000
11 to 15	20									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A245	0000
15 to 20	25									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	10	97525A246	00000
20 to 25	30									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	5	97525A247	0000
25 to 30	35									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	5	97525A248	0000
30 to 35	40									5.1 to 5.2	5	9.5	1.1	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15983	1	97525A249	0000

Aluminum Domed Head Blind Rivets

Installed

Made of aluminum, these blind rivets are lightweight and corrosion resistant. The domed head gives your project a finished appearance.

Use these blind rivets to fasten hinges, shelves, or other assemblies where you can only access one side. They’re also commonly used to join metals that are difficult to solder or weld. For a permanent hold, the back of the rivet deforms to resist vibration and prevent overtightening and stripping.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material.

Aluminum Mandrel

Image of Product. Side1 orientation. Contains Annotated. Aluminum Domed Head Blind Rivets.

ISO 15981—Blind rivets that meet ISO 15981 (formerly DIN 7337) comply with international dimensional standards for blind rivets.

	Lg., mm	For Hole Size, mm	For Drill Bit Size, mm	Head Dia., mm	Head Ht., mm	Shear Strength, lbf	Tensile Strength, lbf	Material	Specs. Met	Pkg. Qty.		Pkg.
3.2 mm Diameter



	1.5 to 3.5	6.1	3.2 to 3.3	3.2	6.5	0.8	110	150	Aluminum	DIN 7337, ISO 15981	50	97447A801	000000


	3.5 to 5.5	8	3.2 to 3.3	3.2	6.5	0.8	110	150	Aluminum	DIN 7337, ISO 15981	10	97447A802	00000
	5.5 to 7	10	3.2 to 3.3	3.2	6.5	0.8	110	150	Aluminum	DIN 7337, ISO 15981	5	97447A803	0000
	7 to 9	12.3	3.2 to 3.3	3.2	6.5	0.8	110	150	Aluminum	DIN 7337, ISO 15981	25	97447A804	0000
	9.5 to 12.5	16	3.2 to 3.3	3.2	6.5	0.8	110	150	Aluminum	DIN 7337, ISO 15981	5	97447A795	0000


	4 mm Diameter



			1.5 to 3	6.6	4 to 4.1	4	8	1	190	220	Aluminum	DIN 7337, ISO 15981	10	97447A806	0000


			5 to 6.5	10	4 to 4.1	4	8	1	190	220	Aluminum	DIN 7337, ISO 15981	25	97447A807	00000
			6.5 to 8.5	12.9	4 to 4.1	4	8	1	190	220	Aluminum	DIN 7337, ISO 15981	5	97447A808	0000
			8.5 to 12.5	16.1	4 to 4.1	4	8	1	190	220	Aluminum	DIN 7337, ISO 15981	10	97447A809	0000


			4.8 mm Diameter



					3.5 to 5.5	8	4.8 to 4.9	4.8	9.5	1.1	260	310	Aluminum	DIN 7337, ISO 15981	5	97447A811	0000


					4.5 to 6	10.3	4.8 to 4.9	4.8	9.5	1.1	260	310	Aluminum	DIN 7337, ISO 15981	25	97447A812	00000
					6 to 8	13.5	4.8 to 4.9	4.8	9.5	1.1	260	310	Aluminum	DIN 7337, ISO 15981	1	97447A813	0000
					8 to 12	16.7	4.8 to 4.9	4.8	9.5	1.1	260	310	Aluminum	DIN 7337, ISO 15981	10	97447A814	0000

Aluminum Flush-Mount Blind Rivets

Installed

Lightweight and corrosion resistant, these blind rivets are made of aluminum. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

They're often used to fasten material together when you only have access to one side, such as when attaching hinges and shelves. You can also use them to join materials that are difficult to weld or solder. The back of the rivet deforms during installation, creating a permanent hold that resists vibration without the chance of overtightening and stripping.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material.

Steel Mandrel


3-5 mm Diameter

ISO 15978—Blind rivets that meet ISO 15978 (formerly DIN 7337) comply with international dimensional standards for blind rivets.

	Lg., mm	For Hole Size, mm	For Drill Bit Size, mm	Head Dia., mm	Head Ht., mm	Countersink Angle	Shear Strength, lbf	Tensile Strength, lbf	Material	Specs. Met	Pkg. Qty.		Pkg.
3 mm Diameter



	1.5 to 3.5	6	3 to 3.1	3	6	0.9	120°	110	80	Aluminum	DIN 7337, ISO 15978	50	90664A101	00000


	3.5 to 5.5	8	3 to 3.1	3	6	0.9	120°	110	80	Aluminum	DIN 7337, ISO 15978	100	90664A102	00000
	5.5 to 7	10	3 to 3.1	3	6	0.9	120°	110	80	Aluminum	DIN 7337, ISO 15978	100	90664A103	00000
	7 to 9	12	3 to 3.1	3	6	0.9	120°	110	80	Aluminum	DIN 7337, ISO 15978	25	90664A104	0000
	9 to 13	16	3 to 3.1	3	6	0.9	120°	110	80	Aluminum	DIN 7337, ISO 15978	25	90664A105	0000


	4 mm Diameter



			1.5 to 3	6	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	50	90664A106	0000


			3 to 5	8	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	50	90664A107	00000
			5 to 6.5	10	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	50	90664A108	00000
			6.5 to 8.5	12	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	50	90664A109	0000
			8.5 to 12.5	16	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	25	90664A110	00000
			12.5 to 14.5	18	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	25	90664A111	0000
			12.5 to 16.5	20	4 to 4.1	4	7.5	1	120°	170	170	Aluminum	DIN 7337, ISO 15978	25	90664A112	00000


			5 mm Diameter



					3 to 4.5	8	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	50	90664A113	00000


					4.5 to 6	10	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	50	90664A114	00000
					6 to 8	12	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	50	90664A115	00000
					8 to 12	16	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	50	90664A116	00000
					10 to 14	18	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	25	90664A117	00000
					12 to 16	20	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	25	90664A118	00000
					16 to 21	25	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	25	90664A119	00000
					21 to 25	30	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	25	90664A120	00000
					25 to 30	35	5 to 5.1	5	9	1.2	120°	350	290	Aluminum	DIN 7337, ISO 15978	5	90664A121	00000

Zinc-Plated Steel Domed Head Blind Rivets

Installed

The zinc-plated finish provides mild corrosion resistance. These rivets join material when you only have access to one side. The low-profile domed head creates a finished appearance.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

Steel Mandrel

Image of Product. Side1 orientation. Contains Annotated. Zinc-Plated Steel Domed Head Blind Rivets.

For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.

Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.

Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

	Lg., mm	For Hole Size, mm	For Drill Bit Size, mm	Head Dia., mm	Head Ht., mm	Shear Strength, lbf	Tensile Strength, lbf	Material	Specs. Met	Pkg. Qty.		Pkg.
3 mm Diameter



	3 to 5	8	3.1 to 3.2	3	6.5	1	220	290	Zinc-Plated Steel	DIN 7337, ISO 15979	25	97519A245	00000


	4 mm Diameter



			2.5 to 4.5	8	4.1 to 4.2	4	8	1.2	440	560	Zinc-Plated Steel	DIN 7337, ISO 15979	25	97519A246	0000


			4.5 to 6.5	10	4.1 to 4.2	4	8	1.2	440	560	Zinc-Plated Steel	DIN 7337, ISO 15979	25	97519A247	0000

18-8 Stainless Steel Flush-Mount Blind Rivets

Installed

With good strength and corrosion resistance, these 18-8 stainless steel blind rivets create a strong hold in damp and wet areas. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

They're often used to fasten material together when you only have access to one side, such as when attaching hinges and shelves. Or, use them to join materials that are difficult to weld or solder. The back of the rivet deforms, so they create a hold that resists vibration, and can't be overtightened or stripped.

All meet either ISO 15980 (formerly DIN 7337) or IFI 114, which are standards for blind rivets.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material.

18-8 Stainless Steel Mandrel

	Lg., mm	For Hole Size, mm	For Drill Bit Size, mm	Head Dia., mm	Head Ht., mm	Countersink Angle	Shear Strength, lbf	Tensile Strength, lbf	Material	Specs. Met	Pkg. Qty.		Pkg.
4 mm Diameter



	2.5 to 4.5	8	4 to 4.1	4	7.5	1	120°	560	780	18-8 Stainless Steel	DIN 7337, ISO 15980	25	90663A110	000000


	4.5 to 6.5	10	4 to 4.1	4	7.5	1	120°	560	780	18-8 Stainless Steel	DIN 7337, ISO 15980	10	90663A120	0000
	6.5 to 8.5	12	4 to 4.1	4	7.5	1	120°	560	780	18-8 Stainless Steel	DIN 7337, ISO 15980	10	90663A130	00000


	5 mm Diameter



			2 to 4	8	5 to 5.1	5	9	1.5	120°	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15980	5	90663A140	0000


			4 to 6	10	5 to 5.1	5	9	1.5	120°	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15980	5	90663A150	0000
			6 to 8	12	5 to 5.1	5	9	1.5	120°	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15980	5	90663A160	0000
			8 to 10	16	5 to 5.1	5	9	1.5	120°	940	1,120	18-8 Stainless Steel	DIN 7337, ISO 15980	5	90663A170	0000