Miniature Electric Actuators with Automated Controls
Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments. They’re often used for aligning, pressing, and diverting. They come with an all-in-one motion control system to set the speed, timing, and position with buttons—no programming is required.
Rod-style actuators have threads on the front of the rod.
Slide table-style actuators give you setup flexibility, since you can mount equipment on top or in front. Mount on top to reduce the space you need to move a full stroke length.
Lg. | Dynamic Load Capacity, lbs. | Extension Rod | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke | Retracted | Voltage | Full Load Current, A | Horizontal | Vertical | Max. Speed, in./sec. | Repeatability, mm | Extension Rod Type | End Type | Dia. | Thread Size | Thread Pitch, mm | Environmental Rating | Each | |
Rod Actuator Style | |||||||||||||||
| 1" | 5 3/8" | 24V DC | 0.9 | 2 | 1 | 5.91 | ±0.05 | Nonrotating | Threaded | 0.47" | M4 | 0.7 | IP40 | 0000000 | 0000000 |
| 1" | 5 7/8" | 24V DC | 2.2 | 4 | 3 | 7.87 | ±0.05 | Nonrotating | Threaded | 0.55" | M5 | 0.8 | IP40 | 0000000 | 000000 |
| 2" | 6 1/2" | 24V DC | 0.9 | 2 | 1 | 5.91 | ±0.05 | Nonrotating | Threaded | 0.47" | M4 | 0.7 | IP40 | 0000000 | 000000 |
| 2" | 6 7/8" | 24V DC | 2.2 | 4 | 3 | 7.87 | ±0.05 | Nonrotating | Threaded | 0.55" | M5 | 0.8 | IP40 | 0000000 | 000000 |
| 3" | 7 7/8" | 24V DC | 0.9 | 2 | 1 | 5.91 | ±0.05 | Nonrotating | Threaded | 0.47" | M4 | 0.7 | IP40 | 0000000 | 000000 |
| 3" | 8 1/4" | 24V DC | 2.2 | 4 | 3 | 7.87 | ±0.05 | Nonrotating | Threaded | 0.55" | M5 | 0.8 | IP40 | 0000000 | 000000 |
Slide Table Actuator Style | |||||||||||||||
| 1" | 5 1/2" | 24V DC | 0.9 | 2 | 1 | 5.91 | ±0.05 | Nonrotating | Unthreaded | 0.47" | __ | __ | IP40 | 0000000 | 000000 |
| 1" | 6" | 24V DC | 2.2 | 4 | 3 | 7.87 | ±0.05 | Nonrotating | Unthreaded | 0.55" | __ | __ | IP40 | 0000000 | 000000 |
| 2" | 6 5/8" | 24V DC | 0.9 | 2 | 1 | 5.91 | ±0.05 | Nonrotating | Unthreaded | 0.47" | __ | __ | IP40 | 0000000 | 000000 |
| 2" | 9" | 24V DC | 2.2 | 4 | 3 | 7.87 | ±0.05 | Nonrotating | Unthreaded | 0.55" | __ | __ | IP40 | 0000000 | 000000 |
Positioning Slides for Universal Robots
 Shown with Robot Arm (Not Included) |  |
 |
Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC. All of these slides have a carriage, slide controller, and software plug-in for connecting, operating, and programming your robot’s arm. The slides become an extension of the arm, so you can program how they glide back and forth on the rail as part of the robot's work cycle. A cable management system keeps your cables from tangling while the slides are in motion.
These slides are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair them with Telescoping Bases for Universal Robots to also extend the vertical reach of your robot’s arm.
Overall | Carriage | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Wd., mm | Ht., mm | Travel Lg., mm | Position Accuracy, mm | Lg., mm | Wd., mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For UR3e, UR5e, UR10e, UR16e Series | |||||||||||||||
Aluminum | |||||||||||||||
| 1,245 | 150 | 190 | 700 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 0000000000 |
| 1,550 | 150 | 190 | 1,000 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 1,855 | 150 | 190 | 1,300 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 2,160 | 150 | 190 | 1,600 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 2,337 | 150 | 190 | 1,800 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
Adjustable Finger Mounts for Schunk Grippers
Removable positioning slides are good for tasks that require frequent finger changes. Having additional slides on hand with fingers already attached, makes it quick and easy to retool your gripper.
Warning: Never use to lift people or items over people.
