McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    26 Products

    Mounts for Custom Robot Tools

    Image of ProductInUse. Front orientation. Contains Annotated. Robot Tool Mounts. Mounts for Custom Robot Tools.
    Image of Product. Front orientation. Robot Tool Mounts. Mounts for Custom Robot Tools, Style A.
    Image of Attribute. Front orientation. Contains Annotated.

    Style A

    Attach custom tools to your robot arm. These mounts have a variety of drilled hole patterns for mounting tools, T-slotted framing rails, sensors, and lights. They attach to the ISO hole pattern on your arm. Made of aluminum, they’re corrosion resistant, lightweight, and machinable.
    For Custom Tool
    For End of Robot Arm
    Style
    No. of Mounting
    Holes
    Mounting
    Hole Dia., mm
    Mount
    Type
    Mounting Fasteners
    Included
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Mount
    Type
    Mounting Fasteners
    Included
    Lg.,
    mm
    Wd.,
    mm
    Thk.,
    mm
    Material
    Each
    A26.1Bolt OnNo31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		Bolt OnYes120809.5Black Anodized Aluminum4904N110000000

    Mounts for Two Robot Tools

    Image of System. Front orientation. Contains Annotated. Robot Tool Mounts. Mounts for Two Robot Tools.
    Image of System. (Each component sold separately). Front orientation. Exploded view. Contains Annotated, MultipleImages. Robot Tool Mounts. Mounts for Two Robot Tools.

    (Each component sold separately)

    Equip your robot arm with two tools at once—these mounts have two angled mounting surfaces. They’re often used to speed up a robot’s work cycle, such as when two grippers swap workpieces in and out of a CNC machine. Or use them to mount tool with different functions, such as a pick-and-place gripper that puts a workpiece into a vise and a sander that finishes the workpiece. These mounts fit most robot arms, such as FANUC CRX and Universal Robots (UR). They either have mounting slots that fit multiple ISO mounting patterns or can be machined to add your own.
    For a complete system, you’ll need one end-of-robot-arm mount and two tool mounts—one for each robot tool. All parts are sold separately. Mounts come with all the hardware you need to attach them to robot arms but not the hardware required to attach tools to the mounts.
    End-of-Robot-Arm Mount
    Image of Product. Front orientation. Robot Tool Mounts. Mounts for Two Robot Tools, End-of-Robot-Arm Mount, For ISO Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.

    For ISO Mounting Patterns

    For ISO Mounting Patterns—Drilled holes make it easy to attach to common robots. Choose a mount that matches the mounting pattern of your robot.
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Mounting
    Plate Dia., mm
    Material
    Mounting Fasteners
    Included
    Each
    For ISO Mounting Patterns
    31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		80Black Anodized AluminumYes4900N110000000
     
    Robot-Tool Mount
    Image of Product. Front orientation. Robot Tool Mounts. Mounts for Two Robot Tools, Robot-Tool Mount, For ISO Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.

    For ISO Mounting

    Patterns

    For ISO Mounting Patterns—Drilled holes make it easy to attach common robot tools. Choose a mount that matches the mounting pattern of your tool.
    For Robot Tool
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Mount
    Type
    Mounting Fasteners
    Included
    Mounting
    Plate Dia., mm
    OD,
    mm
    Material
    Mounting Fasteners
    Included for Tool Mount
    Each
    For ISO Mounting Patterns
    31.5 mm (ISO 31.5)M5 × 0.8 mm (4)Bolt OnNo4060Black Anodized AluminumYes4900N16000000
     

    Robot Tool ISO Mounting Pattern Adapters

    Image of ProductInUse. Front orientation. Contains Annotated. Robot Tool Mounts. Robot Tool ISO Mounting Pattern Adapters.
    Secure robot tools to robot arms that have different ISO mounting patterns. These adapters are compatible with most robot arm models, including FANUC CRX and Universal Robot (UR) arms. Use them to equip your robot with pick-and-place grippers, vacuum lifters, and custom tooling.
    For ISO Mounting Patterns
    Image of Product. Front orientation. Robot Tool Mounts. Robot Tool ISO Mounting Pattern Adapters, For ISO Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.
    For Robot Tool
    For End of Robot Arm
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Mount
    Type
    Mounting Fasteners
    Included
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Mount
    Type
    Mounting Fasteners
    Included
    Material
    Each
    31.5 mm (ISO 31.5)M5 × 0.8 mm (4)Bolt OnNo40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		Bolt OnYesBlack Anodized Aluminum4903N140000000
    31.5 mm (ISO 31.5)M6 × 1 mm (4)Bolt OnNo50 mm (ISO 50)Bolt OnNoBlack Anodized Aluminum3685N10800000
    40 mm (ISO 40)M6 × 1 mm (4)Bolt OnNo31.5 mm (ISO 31.5)
    50 mm (ISO 50)
    63 mm (ISO 63)    		Bolt OnYesBlack Anodized Aluminum4903N13000000
    50 mm (ISO 50)M6 × 1 mm (4)Bolt OnNo31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    63 mm (ISO 63)    		Bolt OnYesBlack Anodized Aluminum4903N12000000
    63 mm (ISO 63)M6 × 1 mm (4)Bolt OnNo31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)    		Bolt OnYesBlack Anodized Aluminum4903N11000000
    Drill-Your-Own Mounting Patterns
    Image of Product. Front orientation. Robot Tool Mounts. Robot Tool ISO Mounting Pattern Adapters, Drill-Your-Own Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.
    Blank on the robot tool side, these adapters let you machine your own holes to attach custom tools. They have an ISO mounting pattern on the robot arm side.
    For Robot Tool
    For End of Robot Arm
    Mount
    Type
    Mounting Fasteners
    Included
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Mount
    Type
    Mounting Fasteners
    Included
    Material
    Each
    Bolt OnNo31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		Bolt OnYesBlack Anodized Aluminum4903N150000000
    For ISO Mounting Patterns—Right Angle
    Image of Product. Front orientation. Robot Tool Mounts. Robot Tool ISO Mounting Pattern Adapters, For ISO Mounting Patterns—Right Angle.
    Image of Attribute. Front orientation. Contains Annotated.
    For Robot Tool
    For End of Robot Arm
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Mount
    Type
    Mounting Fasteners
    Included
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Mount
    Type
    Mounting Fasteners
    Included
    Material
    Each
    50 mm (ISO 50)M6 × 1 mm (4)Bolt OnNo31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)    		Bolt OnNoBlack Anodized Aluminum4903N230000000

    Lever-Locking Robot Tool Changers

    Image of System. Front orientation. Contains Annotated. Robot Tool Changers. Lever-Locking Robot Tool Changers.
    Image of ProductInUse. Front orientation. Contains Annotated. Robot Tool Changers. Lever-Locking Robot Tool Changers.
    Switch out end-of-arm tools with ease. These tool changers use lever-locks for fast, tool-free swaps. Lift the lever to release a tool, slide in a new one, and close the lever—the down position gives you a clear visual that it’s secure. These tool changers have multiple ISO mounting patterns, which makes them compatible with most robot tools and arms, including FANUC CRX and Universal Robots (UR).
    A complete assembly consists of one mount for the end of robot arm and a mount for each of your robot tools. All components are sold separately
    End-of-Robot-Arm Mounts
    Image of Product. Front orientation. Robot Tool Changers. Lever-Locking Robot Tool Changers, End-of-Robot-Arm Mounts.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Product. Front orientation. Robot Tool Changer Calibration Styli.

    Robot Tool

    Calibration

    Styli

    Bolt these mounts to your robot’s wrist with the included fasteners. Confirm that the ISO pattern for the mount matches your robot.
    Robot Tool Calibration Styli—Connect a calibration stylus to your robot arm mount to line up robots with a work area. They’re often used to teach coordinate systems with machine vision cameras for robot guidance. These styli also help teach points with tight tolerances—the pointed tip ensures you’re teaching the exact center of your parts.
    Robot Tool Changers
    Robot Tool
    Calibration Styli
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Max. Load
    Cap.
    Wt.
    Lg.,
    mm
    Mounting Fasteners
    Included
    Material
    Each
    Each
    31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)    		M5 × 0.8 mm (4)
    M6 × 1 mm (4)
    M6 × 1 mm (4)    		110 lb./50 kg0.53 lb./0.24 kg19YesPTFE-Coated Aluminum6968N11200000006968N111000000
     
    Robot-Tool Mounts
    Image of Product. Front orientation. Robot Tool Changers. Lever-Locking Robot Tool Changers, Robot-Tool Mounts, For ISO Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.

    For ISO Mounting

    Patterns

    Attach these mounts to your robot tool.
    For ISO Mounting Patterns—Mounting holes match the ISO bolt patterns on many common robot tools.
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Wt.
    Lg.,
    mm
    Mounting Fasteners
    Included
    Material
    Each
    For ISO Mounting Patterns
    31.5 mm (ISO 31.5)M5 × 0.8 mm (4)0.34 lb./0.15 kg24NoPTFE-Coated Aluminum6968N115000000
     

    Robot Vacuum Cup Mounts

    Image of ProductInUse. Bottom orientation. Contains Annotated. Robot Tool Mounts. Robot Vacuum Cup Mounts.
    Image of Product. Front orientation. Robot Tool Mounts. Robot Vacuum Cup Mounts.
    Image of Attribute. Front orientation. Contains Annotated.
    Attach threaded vacuum cups to robot arms for simple pick-and-place applications. These mounts have push-to-connect inlets on the side, so you don’t need additional fittings. Use them to connect tubing from vacuum pumps or venturi devices. Once connected, vacuum will flow directly into your vacuum cup so your arm can pick up objects. They include the hardware you need to connect them to robot arms.
    For Vacuum Cup
    For End of Robot Arm
    Pipe
    Size
    Thread
    Size
    Thread Type
    Gender
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size
    Mount
    Type
    Mounting Fasteners
    Included
    Material
    Push to Connect
    Inlet Size
    Each
    —10-32, M5
    		UNF, Metric
    		Female31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N160000000
    —10-32, M5
    		UNF, Metric
    		Male31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N17000000
    1/8
    		—BSPP, BSPT, NPT, NPTF
    		Female31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N14000000
    1/8
    		—BSPP, BSPT, NPT, NPTF
    		Male31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N15000000
    1/4
    		—BSPP, BSPT, NPT, NPTF
    		Female31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N12000000
    1/4
    		—BSPP, BSPT, NPT, NPTF
    		Male31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N13000000
    3/8
    		—BSPP, BSPT, NPT, NPTF
    		Female31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N11000000
    3/8
    		—BSPP, BSPT, NPT, NPTF
    		Male31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)
    63 mm (ISO 63)    		M5 × 0.8 mm
    M6 × 1 mm    		Bolt OnYesBlack Acetal6 mm, 10 mm8923N18000000

    Robot Tool Extensions

    Image of System. Front orientation. Contains Annotated. Robot Tool Mounts. Robot Tool Extensions.
    Image of Product. Front orientation. Robot Tool Mounts. Robot Tool Extensions.
    Image of Attribute. Front orientation. Contains Annotated.
    Lengthen your robot arm’s reach for access to the far side of wide conveyors and the bottom of deep containers. These extensions use standard ISO mounting patterns, so they’re compatible with most robot arms and tools, such as those made by FANUC and Universal Robots (UR). They include mounting hardware to connect them to your robot arm, but you'll need to provide your own fasteners to attach your robot tools.
    For End of Robot Arm
    For Robot Tool
    Lg.,
    mm
    Material
    Bolt Hole Dia.
    (No. of)
    Mount
    Type
    Mounting Fasteners
    Included
    Bolt Hole Thread
    Size (No. of)
    Mount
    Type
    Mounting Fasteners
    Included
    Each
    31.5 mm (ISO 31.5)
    25Black Acetal5.5 mm (4)Bolt OnYesM5 × 0.8 mm (4)Bolt OnNo4902N29000000
    50Black Acetal5.5 mm (4)Bolt OnYesM5 × 0.8 mm (4)Bolt OnNo4902N31000000
    100Black Acetal5.5 mm (4)Bolt OnYesM5 × 0.8 mm (4)Bolt OnNo4902N33000000
     

    Robot Tool Changers with Electric and Air Pass-Throughs

    Image of System. Front orientation. Exploded view. Robot Tool Changers. Robot Tool Changers with Electric and Air Pass-Throughs.
    Image of ProductInUse. Front orientation. Contains Annotated. Robot Tool Changers. Robot Tool Changers with Electric and Air Pass-Throughs.
    Quickly swap air- and electric-powered robot tools with these tool changers. Pass-throughs for air and electric connections run through the changer, so you don’t need to disconnect and reconnect air lines or cords when switching robot tools. The separate mounts for your robot arm and tool connect with a lever-locking clamp. Lift the lever to release a tool, slide in a new one, and close the lever to secure it. These tool changers have multiple ISO mounting patterns, which makes them compatible with most robot tools and arms, including FANUC CRX and Universal Robots (UR).
    A complete assembly consists of one mount for the end of robot arm and a mount for each of your robot tools. All components are sold separately.
    End-of-Robot-Arm Mounts
    Image of Product. Front orientation. Robot Tool Changers. Robot Tool Changers with Electric and Air Pass-Throughs, End-of-Robot-Arm Mounts.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Product. Front orientation. Robot Tool Changer Calibration Styli.

    Robot Tool

    Calibration

    Styli

    These mounts pass power and signals from your robot to the connected tool. Two air inlets supply compressed air to single- and double-acting pneumatic tools. Bolt these mounts to your robot’s wrist with the included fasteners, then connect the M8 socket to the plug in your arm. Confirm that the ISO pattern for the mount matches your robot.
    Robot Tool Calibration Styli—Connect a robot tool calibration stylus to your mount to line up robots with a work area. They’re often used to direct robots to hole centers when attaching fasteners, or to help them find objects in pick-and-place applications. You can also use them to help your machine-vision camera recognize patterns and locations.
    Robot Tool Changers
    Robot Tool
    Calibration Styli
    Electrical
    Connection
    Female Air
    Inlets
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Type
    No. of
    Poles
    Coding
    No.
    of
    Connection
    For Tube
    OD, mm
    Max. Load
    Cap.
    Wt.
    Lg.,
    mm
    Mounting Fasteners
    Included
    Material
    Each
    Each
    31.5 mm (ISO 31.5)
    40 mm (ISO 40)
    50 mm (ISO 50)    		M5 × 0.8 mm (4)
    M6 × 1 mm (4)
    M6 × 1 mm (4)    		M8 Socket8A2Push to Connect6110 lb./50 kg0.71 lb./0.32 kg36.8YesPTFE-Coated Aluminum6968N1190000000006968N111000000
     
    Robot-Tool Mounts
    Image of Product. Front orientation. Robot Tool Changers. Robot Tool Changers with Electric and Air Pass-Throughs, Robot-Tool Mounts, For ISO Mounting Patterns.
    Image of Attribute. Front orientation. Contains Annotated.

    For ISO Mounting

    Patterns

    Attach these mounts to your robot tool then connect your tool to the plug and/or outlets on the mount.
    For ISO Mounting Patterns—Mounting holes match the ISO bolt patterns on many common robot tools.
    Electrical
    Connection
    Female Air
    Outlets
    Bolt Circle Dia. (Mounting
    Pattern Compatibility)
    Bolt Hole Thread
    Size (No. of)
    Type
    No. of
    Poles
    Coding
    No.
    of
    Connection
    For Tube
    OD, mm
    Wt.
    Lg.,
    mm
    Mounting Fasteners
    Included
    Material
    Each
    For ISO Mounting Patterns
    31.5 mm (ISO 31.5)M5 × 0.8 mm (4)M8 Plug8A2Push to Connect60.66 lb./0.30 kg40NoPTFE-Coated Aluminum6968N1230000000
     
    back to top