Robot-Ready Vacuum Lifters
With robot tool mounts and connectors, these vacuum lifters come ready to attach to robot arms with standard ISO mounting hole patterns. Use them with compressed air to grip, lift, and move items with curves, angles, and varied heights. Also known as venturi devices, they generate suction without an installed vacuum system. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
Lifters and lifters with cups have two arms with vacuum cup connections. You can adjust the width of the arms to handle large items as well as tilt them to better grip uneven shapes. You can even remove an arm for applications that require only one cup. All of these lifters have a digital display for viewing the status of the lifter and controlling the vacuum. They’re protected from dust and water splashes. Lifters don’t include cups. Add vacuum cups that meet your specific needs. Lifters with cups include eight silicone and polyurethane rubber cups with different sizes and number of bellows. Cups with more bellows are better for handling items that have more variations in shape.
Lifters with a foam pad have an EPDM foam pad that’s soft enough to conform to items without damaging them. They’re best for delicate surfaces as well as porous surfaces where cups cannot obtain an airtight grip. They are not protected from dust and water splashes.
Lifters with PNP signal output communicate proximity with a positive signal, while those with NPN signal output send a negative signal.
Choose lifters with an additional port if you’d like to add a pressure transmitter (not included). Your transmitter will convert air pressure to an electrical signal for viewing air measurements on remote displays and programmable logic controllers (PLCs).
Optional sensors can be added to lifters with a foam pad for communicating the grip position to a controller. They require an A-code micro M12 power cord (sold separately).
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Female Air Connection | End of Robot Arm | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model Number) | Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Use With | Pipe Size  | Thread Type | Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mount. Fasteners Included | Signal Output Type | Each | |
For Smooth and Textured Surfaces | |||||||||||
With Additional Port | |||||||||||
| ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Omron (TM 5, 12, 14) Productive Robotics (OB7) Staubli (TX2) | 15.4 lbs. @ 24 in. of Hg | 24 in. of Hg | 1 scfm @ 60 psi | Bagged Material, Cardboard, Electronics, Glass, Plastic, Sheet Metal | 1/4 | BSPP | 50 mm (ISO 50) | No | NPN, PNP | 00000000 | 000000000 |
Female Air Connection | End of Robot Arm | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model Number) | Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Use With | Pipe Size | Thread Type | Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mount. Fasteners Included | Signal Output Type | Each | |
For Smooth and Textured Surfaces—Polyurethane and Silicone Rubber Cups | |||||||||||
With Additional Port | |||||||||||
| ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Omron (TM 5, 12, 14) Productive Robotics (OB7) Staubli (TX2) | 15.4 lbs. @ 24 in. of Hg | 24 in. of Hg | 1 scfm @ 60 psi | Bagged Material, Cardboard, Electronics, Glass, Plastic, Sheet Metal | 1/4 | BSPP | 50 mm (ISO 50) | No | NPN, PNP | 00000000 | 000000000 |
Female Air Connection | End of Robot Arm | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model Number) | Pad Ht., mm | Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Use With | Pipe Size | Thread Type | Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mount. Fasteners Included | Each | |
For Smooth and Textured Surfaces—EPDM Foam Pad | |||||||||||
With Additional Port | |||||||||||
| ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Omron (TM 5, 12, 14) Productive Robotics (OB7) Staubli (TX2) | 10 | 48.8 lbs. @ 24 in. of Hg | 26 in. of Hg | 4 scfm @ 60 psi | Bagged Material, Cardboard, Electronics, Glass, Plastic, Sheet Metal | 1/8 | BSPP | 50 mm (ISO 50) | No | 00000000 | 000000000 |
| ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Omron (TM 5, 12, 14) Productive Robotics (OB7) Staubli (TX2) | 20 | 48.8 lbs. @ 24 in. of Hg | 26 in. of Hg | 4 scfm @ 60 psi | Bagged Material, Cardboard, Electronics, Glass, Plastic, Sheet Metal | 1/8 | BSPP | 50 mm (ISO 50) | No | 00000000 | 00000000 |
| ABB (IRB 2400; IRB 2600) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Omron (TM 5, 12, 14) Productive Robotics (OB7) Staubli (TX2) | 30 | 48.8 lbs. @ 24 in. of Hg | 26 in. of Hg | 4 scfm @ 60 psi | Bagged Material, Cardboard, Electronics, Glass, Plastic, Sheet Metal | 1/8 | BSPP | 50 mm (ISO 50) | No | 00000000 | 00000000 |
| Output Voltage | Connection Type | Gender | Housing Thread Size | Number of Poles | Each | |
| 1-5V DC | Nano M8 | Male | M8 | 8 | 00000000 | 0000000 |
Robot-Ready Vacuum Lifters for Large Surfaces
These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms. Using compressed air through multiple suction ports, they lift larger and heavier items than standard vacuum lifters. Also known as venturi devices, they generate suction without an installed vacuum system. To view data and adjust settings in a smartphone app, hold a phone that can read near-field communication (NFC) up to one of the NFC tags on these lifters. A digital display lets you read measurements while standing next to them.
These lifters have an IP40 rating, meaning that they keep out objects 1 mm or larger—such as wire—to protect their inner parts. They also meet ISO/TS 15066—with no pinch points or sharp edges, you can safely use them on robots that will be near people.
Lifters with cups grip irregularly shaped items better than lifters with a pad.
Lifters with a pad are better at lifting porous items than lifters with cups, and are also less likely to damage delicate surfaces.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Female Air Connection | End of Robot Arm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Use With | Pipe Size | Thread Type | Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mount. Fasteners Included | Signal Output Type | Communication Standard | Specifications Met | Each | |
For Smooth and Textured Surfaces—Silicone Rubber Cups | |||||||||||||
Schmalz FXCB Series | |||||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) | 18 lbs. @ 17.7 in. of Hg | 17.7 in. of Hg | 7.7 scfm @ 80 psi | Bagged Material, Cardboard, Glass, Plastic, Sheet Metal | 1/4 | BSPP | 50 mm (ISO 50) | Yes | PNP | IO Link, NFC | ISO/TS 15066 | 0000000 | 000000000 |
Female Air Connection | End of Robot Arm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Use With | Pipe Size | Thread Type | Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mount. Fasteners Included | Signal Output Type | Communication Standard | Specifications Met | Each | |
For Smooth and Textured Surfaces—EPDM Foam Pad | |||||||||||||
Schmalz FXCB Series | |||||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) | 18 lbs. @ 17.7 in. of Hg | 17.7 in. of Hg | 7.7 scfm @ 80 psi | Bagged Material, Cardboard, Glass, Plastic, Sheet Metal | 1/4 | BSPP | 50 mm (ISO 50) | Yes | PNP | IO Link, NFC | ISO/TS 15066 | 0000000 | 000000000 |
| Number of Bellows | Cup Dia., mm | Compressed Cup Ht., mm | Cup Ht., mm | Mount. Hole Dia., mm | Each | |
Silicone Rubber | ||||||
|---|---|---|---|---|---|---|
| 2 | 43.5 | 27 | 47 | 4.6 | 00000000 | 000000 |
Number of | |||||
|---|---|---|---|---|---|
| Columns | Rows | Lg., mm | Wd., mm | Each | |
EPDM Foam | |||||
| 15 | 3 | 300 | 130 | 00000000 | 0000000 |
Robot-Ready Electric Vacuum Lifters
Pick up and move items using suction created by electricity—a good option when compressed air isn't available. Choose from complete kits that include everything you need to connect to your robot and start moving items, or individual components to build your own assembly and replace parts.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Robot tool mounts attach lifters to your robot's wrist. Some have standard ISO mounting patterns that match the patterns on most robot arms. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
| For Robot Arm Manufacturer (Series/Model No.) | Bolt Circle Dia, mm | Mounting Hole Pattern Compatibility | Bolt Hole Dia., mm | No. of Bolt Holes | Mounting Fasteners Included | Dia., mm | Ht., mm | Wt. | Each | |
For Schmalz ECBPi Series | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||||
| Doosan (M0609, M0617, M1013, M1509) FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) KUKA Robotics (iiwa 7, 14) Universal Robots (UR3; UR3e; UR5; UR5e; UR10; UR10e; UR16; UR16e) | 50 | ISO 50 | 6.6 | 4 | No | 63.5 | 18 | 0.18 lbs. / 0.08 kg | 00000000 | 0000000 |