Robot Bases
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations. Made from steel, these bases are strong and built to last—they’re also machinable and weldable, so you can modify the mounting plates to suit your application. Secure them to the ground or other flat surface using the holes in the bottom plate. Additional holes are designed to level the bases—thread fasteners (not included) through each hole and adjust their depth to compensate for uneven floors. These bases are only for use at collaborative speeds. They are not designed for robots moving at high speeds.
If you do not see your robot model arm listed, you will need to confirm compatibility yourself. In addition to mounting hole pattern, you will also need to ensure that the maximum potential forces of your robot arm and application are within safe limits for the base's footprint, center of gravity, and any additional anchoring systems. Taller bases have a higher center of gravity and thus require heavier anchoring systems to maintain stability at higher forces compared to shorter bases.
Bolt-on bases come with mounting holes that match the patterns on commonly used robot arms.
Bases with cable routing hole are hollow, so you can feed cables, wires, and tubes through the center column. These bases help keep your cables organized and out of the way.
Overall | Robot Mount. Location | Floor Mount. Location | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Lg. | Wd. | Static Load Cap., lbs. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Plate Dia. | Mount. Hole Dia. (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Features | Each | |
Gray Powder-Coated Steel | |||||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 24" | 11 7/8" | 11 7/8" | 200 | No | 0.236" (4) 0.315" (2) | 8" | 9/16" (4) | 11 7/8" | 11 7/8" | 1/2"-13 Holes for Leveling, Cable Routing Hole | 0000000 | 0000000 |
| FANUC (CRX 5iA, 10iA, 10iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 30" | 11 7/8" | 11 7/8" | 200 | No | 0.236" (4) 0.315" (2) | 8" | 9/16" (4) | 11 7/8" | 11 7/8" | 1/2"-13 Holes for Leveling, Cable Routing Hole | 0000000 | 000000 |
| FANUC (CRX 5iA, 10iA, 10iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 36" | 11 7/8" | 11 7/8" | 200 | No | 0.236" (4) 0.315" (2) | 8" | 9/16" (4) | 11 7/8" | 11 7/8" | 1/2"-13 Holes for Leveling, Cable Routing Hole | 0000000 | 000000 |
| FANUC (CRX 5iA, 10iA, 10iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 42" | 11 7/8" | 11 7/8" | 200 | No | 0.236" (4) 0.315" (2) | 8" | 9/16" (4) | 11 7/8" | 11 7/8" | 1/2"-13 Holes for Leveling, Cable Routing Hole | 0000000 | 000000 |
| FANUC (CRX 5iA, 10iA, 10iA/L) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 48" | 11 7/8" | 11 7/8" | 200 | No | 0.236" (4) 0.315" (2) | 8" | 9/16" (4) | 11 7/8" | 11 7/8" | 1/2"-13 Holes for Leveling, Cable Routing Hole | 0000000 | 000000 |
Bolt-on bases come with mounting holes that match the patterns on commonly used robot arms.
Overall | Robot Mount. Location | Floor Mount. Location | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Lg. | Wd. | Static Load Cap., lbs. | Mount. Fasteners Included | Mount. Hole Thread Size (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Mount. Hole Dia. (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Features | Each | |
Gray Powder-Coated Steel | ||||||||||||||
| FANUC (LR Mate 200iD/4S) | 24" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 000000000 |
| FANUC (LR Mate 200iD/4S) | 30" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/4S) | 36" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/4S) | 42" | 20" | 20" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/4S) | 48" | 20" | 20" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/7L) | 24" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/7L) | 30" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 000000 | 00000000 |
| FANUC (LR Mate 200iD/7L) | 36" | 14" | 14" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/7L) | 42" | 20" | 20" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| FANUC (LR Mate 200iD/7L) | 48" | 20" | 20" | 200 | No | M10 × 1.5mm (4) | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
For a custom mounting pattern, drill your own holes onto blank bases.
Overall | Robot Mount. Location | Floor Mount. Location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Lg. | Wd. | Static Load Cap., lbs. | Mount. Fasteners Included | Mount. Plate Lg. | Mount. Plate Wd. | Mount. Hole Dia. (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Features | Each | |
Gray Powder-Coated Steel | ||||||||||||
| 24" | 14" | 14" | 200 | No | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 0000000 |
| 30" | 14" | 14" | 200 | No | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 000000 |
| 36" | 14" | 14" | 200 | No | 11" | 11" | 3/4" (8) | 14" | 14" | 5/8"-11 Holes for Leveling | 0000000 | 000000 |
| 42" | 20" | 20" | 200 | No | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
| 48" | 20" | 20" | 200 | No | 11" | 11" | 3/4" (8) | 20" | 20" | 5/8"-11 Holes for Leveling | 0000000 | 00000000 |
Use dollies to turn these stationary bases into mobile bases. They have three swivel casters with total lock brakes, so you can brake the wheels and lock the swivel motion with the press of a foot pedal. They also have three leveling feet that swivel to compensate for uneven floors. Clearance under and between the dolly legs will let you use a pallet jack to move very heavy or delicate setups.
Overall | Base Mount. Location | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Lg. | Wd. | Static Load Cap., lbs. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Plate Dia. | Mount. Ht. | Each | |
Gray Powder-Coated Steel | |||||||||
| 7 3/16" | 38 11/16" | 34 1/2" | 500 | Yes | 17/32" (12) | 18" | 5" to 5.5" | 0000000 | 000000000 |
Use anchors to temporarily secure dollies to your floors. Each anchor has a notch that wraps around the stem of the dolly’s leveling foot to hold it in place. Tighten the foot’s wing nut for added holding power. When you need to move the dolly, slide the leveling foot out of the anchor’s notch. To secure one dolly, you’ll need three anchors—one for each leveling foot.
Overall | Floor Mount. Location | ||||||
|---|---|---|---|---|---|---|---|
| Ht. | Lg. | Wd. | Mounting Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Hole Center-to-Center | Each | |
Gray Powder-Coated Steel | |||||||
| 1 13/32" | 6 11/16" | 2 1/4" | No | 9/16" (2) | 5 3/16" | 0000000 | 000000 |
Use these mounts with robot bases to secure your controller near your robot arm for easy access and to cut down on cord lengths. When installed, these mounts elevate your controller off the floor, keeping it out of harm’s way.
Overall | Controller Mount. Location | Base Mount. Location | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Lg. | Wd. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Each | |
Gray Powder-Coated Steel | |||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 4 1/4" | 16 3/4" | 11" | Yes | 1/4" (12) | 3 1/8" | 9" | Yes | 1/4" (5) | 0000000 | 0000000 |
Mounts for Robot Controllers
Use these mounts with robot bases to secure your controller near your robot arm for easy access and to cut down on cord lengths. When installed, these mounts elevate your controller off the floor, keeping it out of harm’s way.
Overall | Controller Mount. Location | Base Mount. Location | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Lg. | Wd. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Plate Lg. | Mount. Plate Wd. | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Each | |
Gray Powder-Coated Steel | |||||||||||
| FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) Omron (TM 5, TM 12, TM 14) | 4 1/4" | 16 3/4" | 11" | Yes | 1/4" (12) | 3 1/8" | 9" | Yes | 1/4" (5) | 0000000 | 0000000 |
Positioning Slides for Universal Robots
 Shown with Robot Arm (Not Included) |  |
 |
Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC. All of these slides have a carriage, slide controller, and software plug-in for connecting, operating, and programming your robot’s arm. The slides become an extension of the arm, so you can program how they glide back and forth on the rail as part of the robot's work cycle. A cable management system keeps your cables from tangling while the slides are in motion.
These slides are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair them with Telescoping Bases for Universal Robots to also extend the vertical reach of your robot’s arm.
Overall | Carriage | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Wd., mm | Ht., mm | Travel Lg., mm | Position Accuracy, mm | Lg., mm | Wd., mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For UR3e, UR5e, UR10e, UR16e Series | |||||||||||||||
Aluminum  | |||||||||||||||
| 1,245 | 150 | 190 | 700 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 0000000000 |
| 1,550 | 150 | 190 | 1,000 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 1,855 | 150 | 190 | 1,300 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 2,160 | 150 | 190 | 1,600 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
| 2,337 | 150 | 190 | 1,800 | ±0.1 | 170 | 200 | 2,450 | 2,700 | 6mm, 8mm (4) | Yes | 6mm (10) | No | Slide Controller, Software Plug-In for Universal Robots | 0000000 | 000000000 |
Telescoping Robot Bases
Take your robot arm to new heights—these bases move up and down to extend your robot’s vertical reach for high and low stacking jobs. Often used for loading boxes off a conveyor, they start at ground level and extend as your stack gets higher. Attach them to your robot arm and program their movement with the robot's work cycle. The bases have a mounting plate, base controller, and software plug-in for connecting, operating, and programming your arm. Use the threaded holes on the bases and mounting plate to attach accessories, such as a cable management system.
Bases for FANUC are approved for compatibility and simple integration with FANUC CRX robot arms. To integrate these bases, install and activate FANUC’s R648 Socket Messaging protocol on your robot arm.
Bases for Universal Robots are all Universal Robots+ (UR+) certified products, and they have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair them with Positioning Slides for Universal Robots to also extend the horizontal reach of your robot’s arm.
Overall Ht. | Overall | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Travel Ht., mm | When Retracted, mm | When Extended, mm | Lg., mm | Wd., mm | Position Accuracy, mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L) | ||||||||||||||
Aluminum | ||||||||||||||
| 700 | 625 | 1,325 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for FANUC Robots | 0000000 | 000000000 |
| 900 | 725 | 1,625 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for FANUC Robots | 0000000 | 00000000 |
For Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) | ||||||||||||||
Aluminum | ||||||||||||||
| 500 | 525 | 1,025 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for Universal Robots | 0000000 | 00000000 |
| 900 | 725 | 1,625 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for Universal Robots | 0000000 | 00000000 |