These steel rod ends are machined to SAE standards.

In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration.

A male-threaded shank lets you build a linkage with a tapped tube or any female-threaded connection.

Connect a clevis rod end to a hydraulic cylinder to create a bend or pivot.

For easy interchangeability, the mounting footprints of these cylinders meet NFPA and JIC industry standards.

These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC industry standards.

Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas.

Instead of attaching your round body air cylinder directly to equipment, add a mount to best suit your application.

Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.

These cylinders thread directly into your equipment, taking minimal space.

Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.

Simplify your setup by running fluid or air through the hollow piston in these air cylinders. The rod extends from both ends, so they can push an object and pull another at the same time, unlike standard air cylinders.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Also known as air clamps, these cylinders are used to apply force in holding applications.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour.

Connect these mounts to an air cylinder to create linear, pivot, or arc movements. These mounts are compatible with NFPA tie rod air cylinders.

Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect. They have an ISO industry-standard footprint to match common mounting patterns for easy interchangeability.

Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.