About Rod Ends
![](https://www.mcmaster.com/prerenderstable/mvPRE/contents/gfx/small/60645kc3s.png?ver=1314261151)
More
Ball Joint Rod End Inserts
![](/prerenderstable/mvPRE/contents/gfx/imagecache/950/95034ac1l1549321953@halfx_636849001161568845.png?ver=imagenotfound)
Shown Installed
![](/prerenderstable/mvPRE/contents/gfx/imagecache/950/95034a500p1-d03c-digitall@halfx_636849067240450003.png?ver=imagenotfound)
Washer
![](/prerenderstable/mvPRE/contents/gfx/imagecache/950/95034a119polished-steelpositive_top_positive_right_washer_1604439697_765@halfx_637400149968827303.png?ver=imagenotfound)
Cone
Without changing the ID, these inserts handle some misalignment on rod ends. They attach to your rod end to move your fastener away from the rod-end body.
Washer-style inserts also protect rod ends. They’re commonly known as retaining safety washers.
Cone-style inserts help position rod ends between receiving forks, straps, and clevises.
303 stainless steel inserts won’t rust in wet, humid, and washdown environments.
For technical drawings and 3-D models, click on a part number.
For Rod End ID | ID | OD | Overall Ht. | Each | |
Washer | |||||
---|---|---|---|---|---|
Zinc-Plated Carbon Steel | |||||
1/4" | 1/4" | 11/16" | 1/8" | 000000000 | 00000 |
5/16" | 5/16" | 13/16" | 3/16" | 000000000 | 0000 |
3/8" | 3/8" | 15/16" | 3/16" | 000000000 | 0000 |
7/16" | 7/16" | 1 1/16" | 1/4" | 000000000 | 00000 |
1/2" | 1/2" | 1 1/4" | 1/4" | 000000000 | 0000 |
5/8" | 5/8" | 1 7/16" | 1/4" | 000000000 | 0000 |
3/4" | 3/4" | 1 5/8" | 5/16" | 000000000 | 00000 |
7/8" | 7/8" | 1 7/8" | 5/16" | 000000000 | 00000 |
1" | 1" | 2 1/4" | 3/8" | 000000000 | 00000 |
Chrome-Plated Carbon Steel | |||||
10mm | 10mm | 16mm | 5mm | 000000000 | 00000 |
12mm | 12mm | 20mm | 5mm | 000000000 | 00000 |
303 Stainless Steel | |||||
1/4" | 1/4" | 11/16" | 1/8" | 000000000 | 00000 |
5/16" | 5/16" | 13/16" | 3/16" | 000000000 | 00000 |
3/8" | 3/8" | 15/16" | 3/16" | 000000000 | 00000 |
1/2" | 1/2" | 1 1/4" | 1/4" | 000000000 | 00000 |
5/8" | 5/8" | 1 7/16" | 1/4" | 000000000 | 00000 |
3/4" | 3/4" | 1 5/8" | 5/16" | 000000000 | 00000 |
Cone | |||||
Chrome-Plated Carbon Steel | |||||
3/16" | 3/16" | 1/2" | 5/16" | 000000000 | 00000 |
1/4" | 1/4" | 9/16" | 5/16" | 000000000 | 00000 |
5/16" | 5/16" | 11/16" | 3/8" | 000000000 | 00000 |
1/2" | 1/2" | 1 1/16" | 1/2" | 000000000 | 00000 |
5/8" | 5/8" | 1 5/16" | 9/16" | 000000000 | 00000 |
3/4" | 3/4" | 1 9/16" | 5/8" | 000000000 | 00000 |
7/8" | 7/8" | 1 5/8" | 11/16" | 000000000 | 00000 |
1" | 1" | 2" | 9/16" | 000000000 | 00000 |
1 1/4" | 1 1/4" | 2 1/4" | 13/16" | 000000000 | 00000 |
6mm | 6mm | 14mm | 9mm | 000000000 | 00000 |
8mm | 8mm | 17mm | 9mm | 000000000 | 00000 |
12mm | 12mm | 25mm | 11mm | 000000000 | 00000 |
Ball Joint Rod End Reducers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4723tp3l1549473142@halfx_636850483436257242.png?ver=imagenotfound)
Shown Installed
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4723t3p1-d03c-digital@halfx_636849333281645625.png?ver=imagenotfound)
Decrease the ID of your rod end to allow approximately 60° of misalignment. Reducers attach to your rod end to move your fastener away from the rod-end body.
For Rod End ID | ID | OD | Overall Ht. | Material | Pair | |
1/2" | 3/8" | 5/8" | 5/8" | 17-4 PH Stainless Steel | 000000 | 000000 |
5/8" | 1/2" | 13/16" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
3/4" | 1/2" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
3/4" | 5/8" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
7/8" | 3/4" | 1 1/16" | 1 1/4" | 17-4 PH Stainless Steel | 000000 | 00000 |
1" | 3/4" | 1 1/8" | 1 3/8" | 17-4 PH Stainless Steel | 000000 | 00000 |