About Rod Ends
More
Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M4 × 0.7 mm | 4mm | 30° | 11mm | 6.9mm | 25mm | 14mm | Not Rated | Carbon Steel | Right Hand | 00000000 | 000000 |
Internally Threaded Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M4 × 0.7 mm | 4mm | 30° | 11mm | 4.9mm | 22mm | 10mm | Not Rated | Carbon Steel | Right Hand | 00000000 | 000000 |
Corrosion-Resistant Ball Joint Rod Ends
Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| M4 × 0.7 mm | 4mm | 33.5° | 14mm | 6.9mm | 30mm | 19mm | Not Rated | 303 Stainless Steel | Right Hand | 00000000 | 000000 |
Internally Threaded Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Shank Thread Direction | Each | |
| M4 × 0.7 mm | 5mm | 15° | 18mm | 6mm | 27mm | 10mm | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 000000 |
Easy-Adapt Clevis Rod Ends
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Specifications Met | Each | |
Zinc-Plated Carbon Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M4 × 0.7 mm | 4mm | 4mm | 8mm | 16mm | 8mm | 8mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 00000 |