About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Plastic
More
About Tool Steel
More
About Aluminum
More
Low-Carbon Steel Rods and Discs
- Yield Strength: See table
- Hardness: See table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See table
- Specifications Met: See table
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. This material can be surface hardened with heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
High-Strength 1045 Carbon Steel Rods and Discs
Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 77,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Specifications Met: ASTM A108
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Straightness Tolerance | Choose a Length | Per Inch | |
4 3/4" | -0.006" to 0" | 1/8" | 13"-90" | 0000000 | 000000 |
High-Strength 4340 Alloy Steel Rods
- Yield Strength: 68,000 psi
- Hardness: Rockwell C20 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Not Rated
Use 4340 alloy steel for power transmission and structural applications that involve extreme impact, heat, and wear.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Impact-Resistant Ductile Cast Iron Rods and Discs
- Yield Strength: 55,000 psi
- Hardness: Rockwell C20 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A536
Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking. It also absorbs vibration, so finished parts run quieter than those made of steel.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized Multipurpose Air-Hardening A2 Tool Steel Rods and Discs
- Yield Strength: 55,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C64
An oversized diameter allows for finishing to your exact requirements. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To order: Please specify length in increments of 0.25” within the range listed.
Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | Specifications Met | Choose a Length | Per Inch | |
4 3/4" | 0.01" to 0.093" | Turned | Not Rated | ASTM A681 | 13" to 90" in 0.25" increments | 0000000 | 000000 |
Oversized Shock-Resistant S7 Tool Steel Rods and Discs
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C55
- Specifications Met: ASTM A681
An oversized diameter allows for finishing to your exact requirements. Often made into chisels, rivets, and punches, S7 tool steel can handle repeated impact without fracturing. It is an air-hardening material. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
4 3/4" | 0.062" to 0.109" | Annealed (Softened) | Turned | Not Rated | 13"-90" | 0000000 | 000000 |
Multipurpose 6061 Aluminum Rods and Discs
- Yield Strength: 35,000 psi
- Hardness:
Foot and inch sizes: Brinell 95 (Soft)
Metric sizes: Brinell 80 (Soft) - Temper: See table
- Fabrication: See table
- Specifications Met:
Cold Worked: ASTM B211
Extruded: ASTM B221
Cold Rolled: ASTM B209
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | Choose a Length | Per Inch | |
4 3/4" | -0.034" to 0.034" | Extruded | T6511 | Hardened | -320° to 300° | 13"-90" | 0000000 | 000000 |
Wear-Resistant Nylon Rods and Discs
- Color: Off-White or Black
- Max. Temperature: 185° F
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
- Specifications Met:
Off-White:
1/16" Dia.: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 HB
1/8" Dia. and larger: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 V-2
Black:
ASTM D5989, ASTM D6779, UL 94 V-2
Often machined into bearings, gears, cams, and valve seats, these wear-resistant nylon 6/6 rods and discs have a slippery surface that reduces friction.
For technical drawings and 3-D models, click on a part number.