1"-14 Rods | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Material

Fastener Strength Grade/Class

Thread Spacing

Threading

Shank Thread Size

Thread Direction

Finish

Zinc Yellow-Chromate Plated

Shank Gender

Female

Male

Fastener Strength Rating

Thread Type

Tensile Strength

Rod End Type

Performance

Static Radial Load Capacity

10,000 lb. to 99,999 lb.

100,000 lb. to 199,999 lb.

Hardness

Export Control Classification Number (ECCN)

EAR99

Shank Thread Direction

Left Hand

Right Hand

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

RoHS

Thread Fit

Unified Standard Class 1A

Unified Standard Class 2A

Unified Standard Class 2B

Forward

How can we improve?

75 Products

Threaded Rods

Anchor, connect, or hang components in a wide variety of applications, from mounting I-beams to suspending light fixtures.

Medium-Strength Steel

Image of Product. Front orientation. Threaded Rods. Threaded Rods.

With tensile strengths from 110,000 psi to 125,000 psi, these rods are strong enough for most industrial applications, such as anchoring machinery and connecting pipe flanges. They are about twice as strong as low-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also medium-strength steel.

Zinc-Yellow-Chromate-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Zinc-Yellow-Chromate-Plated Steel







	1"-14

	1 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	99086A372	000000


	3 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	99086A151	00000
	6 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	99086A206	000000


	Steel







					1"-14

					4"	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98750A522	00000


					6"	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98750A523	00000
					8"	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98750A524	00000
					10"	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98750A525	00000
					1 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98957A412	00000
					1 1/2 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98957A188	00000
					2 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98957A818	00000
					2 1/2 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	98957A189	00000
					3 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A114	00000
					4 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A153	00000
					5 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A154	00000


					6 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A214	000000
					8 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A155	000000
					12 ft.	125,000	ASTM Grade B7	Rockwell C35	ASTM A193	92580A314	000000

High-Strength Steel

With a tensile strength of 150,000 psi, these rods are strong enough to stabilize steel frameworks and structural supports, such as I-beams. They are about 25% stronger than medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also high-strength steel.

Zinc-Yellow-Chromate-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Black-Oxide Steel—Typically chosen for their appearance, these rods have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Zinc-Yellow-Chromate-Plated Steel







	1"-14

	4"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N75	000000


	6"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N76	00000
	1 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N827	00000
	2 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N828	00000
	3 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N829	000000
	6 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3313N83	000000


	Black-Oxide Steel







					1"-14

					4"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N69	00000


					6"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N71	00000
					1 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N781	00000
					2 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N782	00000
					3 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N783	000000
					6 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	3314N784	000000


					Steel







									1"-14

									4"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A227	00000


									6"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A228	00000
									8"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A288	00000
									10"	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A381	00000
									1 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A229	00000
									1 1/2 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A382	00000
									2 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A230	00000
									3 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A231	000000
									4 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A289	000000
									6 ft.	150,000	ASTM Grade BD	Rockwell C33	ASTM A354 Grade BD	90322A332	000000

Low-Strength Steel

With a tensile strength of 50,000 psi or 60,000 psi, these rods are often used to suspend light fixtures, cable trays, and conduit from ceilings. They're about half the strength of medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also low-strength steel.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Pkg. Qty.		Pkg.
Zinc-Plated Steel







	1"-14

	1	50,000	Rockwell B61	1	90034A320	000000


	2	50,000	Rockwell B61	1	90032A038	00000
	3	50,000	Rockwell B61	1	98842A038	00000
	6	50,000	Rockwell B61	1	98915A038	00000


	Steel







					1"-14

					1	50,000	Rockwell B61	1	98790A420	00000


					2	50,000	Rockwell B61	1	98791A038	00000
					3	50,000	Rockwell B61	1	98838A038	00000
					6	50,000	Rockwell B61	1	98911A038	00000

Stainless Steel

More corrosion resistant than steel rods and comparable in strength to low-strength steel.

18-8 Stainless Steel—The choice for wet and outdoor environments, these rods resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Hardness	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







	1"-14

	4"	70,000	—	Rockwell B70	—	1	95412A358	000000


	6"	70,000	—	Rockwell B70	—	1	95412A359	00000
	8"	70,000	—	Rockwell B70	—	1	95412A104	00000
	1 ft.	75,000	ASTM Grade B8	Not Rated	ASTM A193	1	91187A970	00000
	1 ft.	70,000	—	Rockwell B70	—	1	98804A519	00000
	2 ft.	75,000	ASTM Grade B8	Not Rated	ASTM A193	1	91187A975	00000
	2 ft.	70,000	—	Rockwell B70	—	1	98805A038	00000
	3 ft.	75,000	ASTM Grade B8	Not Rated	ASTM A193	1	91187A980	000000
	3 ft.	70,000	—	Rockwell B70	—	1	98848A038	000000
	4 ft.	70,000	—	Rockwell B70	—	1	95412A105	00000
	6 ft.	75,000	ASTM Grade B8	Not Rated	ASTM A193	1	91187A985	000000


	6 ft.	70,000	—	Rockwell B70	—	1	98921A038	000000

Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K63	000000

Hydraulic Cylinder Flat-Shoulder Rod Ends


Rod End Installed on Hydraulic Cylinder

Create a bend or pivot at the end of a hydraulic cylinder. These rod ends meet common NFPA and JIC mounting patterns, so they're easy to swap out.

	ID	Thread Size	Lg.	Wd.	Ht.	Gender	For Hydraulic Cylinder Mounting Pattern		Each
Steel



	1"	1"	1"-14	3 13/16"	2"	1 1/2"	Female	NFPA Light Duty, NFPA/JIC Heavy Duty	6466N13	000000

Coupling Nuts

Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.

Low-Strength Steel

Rated Grade 2 or lower, these are about half as strong as medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

						Each
	Thread Size	Lg.	Wd.	Threading		1-9	10-49	50-Up
Zinc-Plated Steel



		1"-14	2 3/4"	1 3/8"	Fully Threaded	90264A265	000000	000000	000000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are about twice as strong as low-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

							Each
	Thread Size	Lg.	Wd.	Fastener Strength Grade/Class	Threading		1-9	10-49	50-Up
Zinc-Plated Steel



		1"-14	2 3/4"	1 3/8"	SAE Grade 5	Fully Threaded	90977A230	000000	000000	000000

High-Strength Steel

Rated Grade 8 or Class 10, these are about 25% stronger than medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

							Each
	Thread Size	Lg.	Wd.	Fastener Strength Grade/Class	Threading		1-9	10-49	50-Up
Zinc-Plated Steel



		1"-14	2 3/4"	1 1/2"	SAE Grade 8	Fully Threaded	90983A241	000000	000000	000000

Thread-Mount Idler Rotary Shafts


Tensioner Shown with Idler Shaft (Sold Separately)	Shaft Collar End	Shaft Collar End

Thread these shafts into a tapped hole to support idler sprockets and pulleys in tensioning applications.

Shaft Collar End—Shafts with a shaft collar come with a grease fitting for easy lubrication of your pulleys and sprockets. Adjust the collar to the width of your component.

			Overall		Thread
	Dia.	Lg.	Lg.	Dia.	Size	Lg.	Edge Type	Fabrication	Hardness Rating	Hardness		Each
Shaft Collar End—1215 Carbon Steel



		1 1/2"	3 1/4"	5 11/16"	2 1/4"	1"-14	1 5/16"	Chamfered	Hardened	Extra Hard	Rockwell C58	2435K104	000000


		1 1/2"	5 1/4"	7 11/16"	2 1/4"	1"-14	1 5/16"	Chamfered	Hardened	Extra Hard	Rockwell C58	2435K105	00000

Lubrication-Free Ball Joint Rod Ends

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	2458K443	000000

Internally Threaded Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K73	000000

Left-Hand Threaded Rods

Turn these rods to the left to tighten. Use them with left-hand nuts to prevent counterclockwise-moving parts from loosening.

Medium-Strength Steel

Image of Product. Front orientation. Contains Annotated. Threaded Rods. Left-Hand Threaded Rods.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Steel







	1"-14

	1	125,000	ASTM Grade B7	Rockwell C34	ASTM A193	95625A315	000000


	3	125,000	ASTM Grade B7	Rockwell C34	ASTM A193	95625A047	00000
	6	125,000	ASTM Grade B7	Rockwell C34	ASTM A193	95625A202	000000

Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	37,000	Carbon Steel	Right Hand, Left Hand	4444T7	000000

High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints







				Zinc-Plated Alloy Steel Insert and PTFE Liner

				1"-14	4 1/2"	2 1/2"	1"	17°	2 15/16"	1 3/8"	107,150	Zinc-Plated Alloy Steel	Right Hand, Left Hand	60745K72	0000000

Internally Threaded Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. These rod ends don’t come lubricated, so you'll need to lubricate during installation and on an ongoing basis. Made of steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Carbon Steel	Right Hand, Left Hand	4444T27	000000

Internally Threaded High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints







				Zinc-Plated Alloy Steel Insert and PTFE Liner

				1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	76,200	Zinc-Plated Alloy Steel	Right Hand, Left Hand	60745K73	0000000