McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    9 Products

    Threaded Rods

    Anchor, connect, or hang components in a wide variety of applications, from mounting I-beams to suspending light fixtures.
    High-Strength Steel
    Image of Product. Front orientation. Threaded Rods. Threaded Rods.
    With a tensile strength of 150,000 psi, these rods are strong enough to stabilize steel frameworks and structural supports, such as I-beams. They are about 25% stronger than medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also high-strength steel.
    Steel—Best for dry environments since moisture will cause these rods to rust.
    Lg.,
    ft.
    Tensile Strength,
    psi
    Fastener Strength
    Grade/Class
    Hardness
    Specs. Met
    Each
    Steel
     
    1 3/4"-12
    3150,000ASTM Grade BD
    Rockwell C33ASTM A354 Grade BD0000000000000000
    6150,000ASTM Grade BD
    Rockwell C33ASTM A354 Grade BD000000000000000
     
    Medium-Strength Steel
    Image of Product. Front orientation. Threaded Rods. Threaded Rods.
    With tensile strengths from 110,000 psi to 125,000 psi, these rods are strong enough for most industrial applications, such as anchoring machinery and connecting pipe flanges. They are about twice as strong as low-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also medium-strength steel.
    Steel—Best for dry environments since moisture will cause these rods to rust.
    Lg.,
    ft.
    Tensile Strength,
    psi
    Fastener Strength
    Grade/Class
    Hardness
    Specs.
    Met
    Each
    Steel
     
    1 3/4"-12
    1125,000ASTM Grade B7
    Rockwell C35ASTM A193
    000000000000000
    3125,000ASTM Grade B7
    Rockwell C35ASTM A193
    000000000000000
    6125,000ASTM Grade B7
    Rockwell C35ASTM A193
    000000000000000
     
    Low-Strength Steel
    Image of Product. Front orientation. Threaded Rods. Threaded Rods.
    With a tensile strength of 50,000 psi or 60,000 psi, these rods are often used to suspend light fixtures, cable trays, and conduit from ceilings. They're about half the strength of medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also low-strength steel.
    Steel—Best for dry environments since moisture will cause these rods to rust.
    Lg.,
    ft.
    Tensile Strength,
    psi
    Hardness
    Pkg.
    Qty.
    Pkg.
    Steel
     
    1 3/4"-12
    150,000Rockwell B611000000000000000
    250,000Rockwell B611000000000000000
    350,000Rockwell B611000000000000000
    650,000Rockwell B611000000000000000
     
    back to top