M36 Rods | McMaster-Carr

With tensile strengths from 110,000 psi to 125,000 psi, these rods are strong enough for most industrial applications, such as anchoring machinery and connecting pipe flanges. They are about twice as strong as low-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also medium-strength steel.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Zinc-Plated Steel







	M36 × 4 mm

	1 m	110,000	Class 8.8	Rockwell C20	DIN 976	99067A142	0000000


	Steel







					M36 × 3 mm

					300 mm	125,000	ASTM Grade B7	Rockwell C35	ASTM A193, DIN 975	95245A185	000000


					1 m	125,000	ASTM Grade B7	Rockwell C35	ASTM A193, DIN 975	95245A186	000000




							M36 × 4 mm

							300 mm	125,000	ASTM Grade B7	Rockwell C35	ASTM A193, DIN 976	93325A330	000000


							300 mm	110,000	Class 8.8	Rockwell C20	DIN 976	99055A342	00000
							1 m	125,000	ASTM Grade B7	Rockwell C35	ASTM A193, DIN 976	93325A305	000000
							1 m	110,000	Class 8.8	Rockwell C20	DIN 976	99055A343	000000
							2 m	125,000	ASTM Grade B7	Rockwell C35	ASTM A193, DIN 976	93325A320	000000

High-Strength Steel

With a tensile strength of 150,000 psi, these rods are strong enough to stabilize steel frameworks and structural supports, such as I-beams. They are about 25% stronger than medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also high-strength steel.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Steel







	M36 × 4 mm

	100 mm	150,000	Class 10.9	Rockwell C32	DIN 976	1078N101	000000


	150 mm	150,000	Class 10.9	Rockwell C32	DIN 976	1078N102	00000
	200 mm	150,000	Class 10.9	Rockwell C32	DIN 976	1078N103	00000
	300 mm	150,000	Class 10.9	Rockwell C32	DIN 976	1078N104	00000
	500 mm	150,000	Class 10.9	Rockwell C32	DIN 976	1078N105	000000
	1 m	150,000	Class 10.9	Rockwell C32	DIN 976	1078N24	000000
	2 m	150,000	Class 10.9	Rockwell C32	DIN 976	1078N106	000000

Extreme-Strength Steel

Our strongest threaded rods have a tensile strength of 170,000 psi to hold up in your most demanding high-stress applications. They're about 20% stronger than high-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also extreme-strength steel.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Hardness	Specs. Met		Each
Steel







	M36 × 4 mm

	50 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N671	000000


	100 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N676	00000
	150 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N688	000000
	200 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N697	000000
	300 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N702	000000
	500 mm	170,000	Class 12.9	Rockwell C39	DIN 976	1077N709	000000
	1 m	170,000	Class 12.9	Rockwell C39	DIN 976	1077N745	000000
	2 m	170,000	Class 12.9	Rockwell C39	DIN 976	1077N826	000000

Low-Strength Steel

With a tensile strength of 50,000 psi or 60,000 psi, these rods are often used to suspend light fixtures, cable trays, and conduit from ceilings. They're about half the strength of medium-strength steel rods. To avoid stripped threads during installation, make sure your nuts are also low-strength steel.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these rods to rust.

	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







	M36 × 4 mm

	300 mm	50,000	Rockwell B49	DIN 976	1	94595A253	0000000


	1 m	50,000	Rockwell B49	DIN 976	1	94595A254	000000


	Steel







					M36 × 3 mm

					300 mm	50,000	Rockwell B49	DIN 976	1	98861A617	00000


					1 m	50,000	Rockwell B49	DIN 976	1	98861A618	00000




							M36 × 4 mm

							300 mm	50,000	Rockwell B49	DIN 976	1	98861A240	00000


							1 m	50,000	Rockwell B49	DIN 976	1	98861A180	00000

Stainless Steel

More corrosion resistant than steel rods and comparable in strength to low-strength steel.

18-8 Stainless Steel—The choice for wet and outdoor environments, these rods resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these rods won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







	M36 × 4 mm

	300 mm	70,000	Not Rated	DIN 976	1	90024A320	0000000


	1 m	70,000	Not Rated	DIN 976	1	90024A321	000000
	2 m	70,000	Not Rated	DIN 976	1	90024A322	000000


	Highly Corrosion-Resistant 316 Stainless Steel







					M36 × 4 mm

					300 mm	75,000	Not Rated	DIN 976	1	94185A596	000000


					1 m	75,000	Not Rated	DIN 976	1	94185A597	000000
					2 m	75,000	Not Rated	DIN 976	1	94185A598	000000

Threaded on Both Ends Setup Studs

Known as setup studs, these studs withstand sideways forces better than fully threaded studs because they have a strong unthreaded middle. The unthreaded middle also makes more contact with unthreaded holes, creating better alignment than a fully threaded stud.

Steel

	Thread, mm
	Lg. (A)	Lg. (B)	Lg., mm	Tensile Strength, psi		Each
M36 × 4 mm



		51	200	315	125,000	98867A117	000000


		51	315	500	125,000	98867A118	000000

Coupling Nuts

Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.

Low-Strength Steel

Rated Grade 2 or lower, these are about half as strong as medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Oxide Steel—A dark, matte coating creates a finished look. Nuts offer minimal corrosion resistance, so they're best for dry environments.

							Each
	Thread Size	Lg., mm	Wd., mm	Threading	Specs. Met		1-9	10-49	50-Up
Zinc-Plated Steel



		M36 × 4 mm	108	55	Fully Threaded	DIN 6334	93355A590	0000000	000000	000000


		Black-Oxide Steel



				M36 × 4 mm	108	55	Fully Threaded	DIN 6334	93020A112	000000	00000	00000

High-Strength Steel

Rated Grade 8 or Class 10, these are about 25% stronger than medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Steel—Best for dry environments since moisture will cause these nuts to rust.

								Each
	Thread Size	Lg., mm	Wd., mm	Fastener Strength Grade/Class	Threading	Specs. Met		1-9	10-49	50-Up
Steel



		M36 × 4 mm	108	55	Class 10	Fully Threaded	DIN 6334	97778A180	0000000	0000000	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

							Each
	Thread Size	Lg., mm	Wd., mm	Threading	Specs. Met		1-9	10-49	50-Up
18-8 Stainless Steel



		M36 × 4 mm	108	55	Fully Threaded	DIN 6334	93590A337	0000000	0000000	0000000