For quick jobs without the cleanup, these rollers come with a small plastic tray. Handy for painting a tight spot, they cover spaces where standard-size rollers won't fit.

Use these small, disposable, light foam rollers for quick touch-up jobs. They’re small enough to fit inside a one-gallon paint can. Use with any type of paint or coating on semi-smooth surfaces, such as walls and ceilings, and semi-rough surfaces, such as textured walls and concrete.

Use these rollers to apply stencil ink to flat surfaces. They have an ultra-absorbent neoprene foam wheel that allows you to make multiple stencil imprints with a single inking. The included pad works with any stencil ink (sold separately).

These short, narrow rollers cover areas where standard paint rollers won't fit.

Quickly paint round surfaces as small as 1" and up to 10 feet in diameter. The two rollers adjust in 30° increments, so you can adjust the angle to suit your application. They accept 4 _1/2" and 6 _1/2" long roller covers (sold separately). Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

Cover large areas quickly without the need for a paint tray. These rollers have a tube that draws 22 fl. oz. of paint into the handle—enough to cover about 70 square feet. Squeeze the trigger to keep the roller filled with fresh paint as you go. Rollers have a knitted fabric nap that leaves a textured finish. Use them with latex and other water-based paint on semi-smooth surfaces, such as walls and ceilings.

Fill the bottle-like handle on these rollers with paint and dispense as you roll, so you don't have to stop at a paint tray. Rollers are short for quick touch-up jobs or to fit in tight spaces. Rollers have a plastic nap. Use them with water-based paint on smooth, semi-smooth, semi-rough, or rough surfaces, such as metal doors, cabinetry, walls, ceilings, textured walls, concrete, stone, masonry, and brick.

Coat large curved surfaces of various sizes with these rollers. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces. Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

These paint rollers conform to round surfaces up to 2 _1/2" diameter. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces. Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

The shield on these rollers prevents spatter from creating a mess. Use the 3/4" Acme threaded hole to attach an extension handle (sold separately).

Touch up small scratches on metal surfaces with these pens.

No need to refill—screw on a new cartridge when the ink runs out and the handle dispenses it into the roller so you don't need an ink pad or tray. Use this roller to apply stencil ink to flat surfaces. The included ink works with porous and nonporous surfaces.

Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.