60 Size Roller Chain Attachment Links

Filter by

Roller Chain Trade Number

Attachment Type

Pitch

Link Type

Adding and Connecting

Roller Chain Type

Strand Type

Component

Roller Chain Attachment Style

Material

Length

Roller Width

Mounting Hole Diameter

Tab Length

Working Load

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

Chain Pitch Type

Single

Chain Standard

ANSI

Roller Diameter

0.469"

Finish

Corrosion-Resistant Coated

Nickel Plated

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Tab Width

REACH

RoHS

Pin Diameter

Performance

Height

86 Products

Attachment Roller Chain Links


Connecting Link A-1 Attachment	Connecting Link K-1 Attachment	Connecting Link SA-1 Attachment	Connecting Link SK-1 Attachment	Connecting Link WA-2 Attachment

Connecting Link WK-2 Attachment	Connecting Link WSA-2 Attachment	Connecting Link WSK-2 Attachment	Connecting Link D-1 Attachment	Connecting Link D-3 Attachment

Adding Link A-1 Attachment	Adding Link K-1 Attachment	Adding Link SA-1 Attachment	Adding Link SK-1 Attachment

Image of Attribute. Front orientation. Contains Annotated.

Add these links to your roller chain to attach brackets and guides, move items directly, or trip switches in conveying, timing, and aligning setups. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping. We offer compatible chain for your convenience. When using your own chain, make sure the trade numbers match. Do not use these links with our Low-Maintenance Roller Chain.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Corrosion-Resistant-Coated Steel—Combines the strength of steel with the corrosion resistance of stainless steel. The coating has been tested to withstand 500 hours of salt spray, so it holds up well in wet and outdoor conditions.

Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.

Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller links.

Pin—The pins are extended to trip switches.

Tab—The tabs have holes to mount parts and hang hooks.

	Links												Chain
	Attachment		Roller Chain						Connecting Link		Adding Link
	Style	Type	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each		Each		Per Ft.
Steel



		A-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	00000	0000000	00000	00000000	000000


		K-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	0000000	0000	00000000	00000
		SA-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	0000000	0000	00000000	00000
		SK-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	0000000	0000	00000000	00000
		WA-2	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	00000000	00000	———	0	00000000	00000
		WK-2	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	00000000	00000	———	0	00000000	00000
		WSA-2	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	00000000	00000	———	0	00000000	00000
		WSK-2	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	00000000	00000	———	0	00000000	00000
		D-1	Pin	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	00000000	00000
		D-3	Pin	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	00000000	00000


		Corrosion-Resistant-Coated Steel



				A-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000


				K-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000
				SA-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000
				SK-1	Tab	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000
				D-1	Pin	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000
				D-3	Pin	60	ANSI	3/4"	0.469"	1/2"	2,450	0000000	0000	———	0	000000	00000

Roller Chain and Links

Connecting Links

Adding Links

Adding-and-Connecting

Links

Pair this chain with sprockets to transmit power between rotating shafts. Like the chain on a bike, the side plates have a figure-eight shape that grips the sprockets without slipping.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.

Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller links.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain—except for trade number 25, which requires a separate connecting link. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain						Connecting Links		Adding Links		Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each		Each		Each
Single Strand







				Steel

				60	ANSI	3/4"	0.469"	1/2"	2,470	00000000	00000	00000000	00000	00000000	00000




						Corrosion-Resistant-Coated Steel

						60	ANSI	3/4"	0.469"	1/2"	2,450	00000000	0000	00000000	0000	00000000	0000




								Corrosion-Resistant 304 Stainless Steel

								60	ANSI	3/4"	0.469"	1/2"	230	0000000	0000	0000000	0000	0000000	00000

ANSI Roller Chain Spring Clips

Clip Shown

Installed

Replace lost or damaged spring clips to secure the pins on your connecting links. Face the opening away from the direction of travel to maintain a snug fit.

	Lg.	Ht.	Pkg. Qty.		Pkg.
Steel



	60	1 3/16"	1/2"	5	0000000	00000

Flat-Edge Roller Chain and Links

Connecting Links

Adding Links

No more hang-ups thanks to the flat, oblong side plates that create a level surface to keep items moving along conveyor lines. Unlike standard roller chain, there are no divots to snag products. Pair this chain with sprockets to transmit power between rotating shafts.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller links.

	Roller Chain						Connecting Links		Adding Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.		Each		Each
Single Pitch







				Steel

				60	ANSI	3/4"	0.469"	1/2"	2,400	0000000	00000	0000000	00000

Hollow-Pin Roller Chain and Links

Connecting Links

Adding-and-Connecting

Link

Slide rods or other attachments straight through the rollers. With hollow pins, there’s no need to take this chain apart or add attachment links like you would with standard roller chain. Pair the chain with sprockets to transmit power between rotating shafts. It’s commonly used in conveying applications.

Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.

Steel—The go-to for roller chain, steel is strong and economical. While proper lubrication helps prevent rusting, it’s not as corrosion resistant as coated or stainless steel.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain							Connecting Links		Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.	Pinhole Dia.		Each		Each
Single Strand







				Steel

				60	ANSI	3/4"	0.469"	1/2"	940	0.236"	00000000	000000	00000000	000000

Low-Maintenance Roller Chain and Links

Connecting Links

Adding-and-Connecting

Links

Forget the mess and the stress, this chain has bearings that run reliably with little or no need for lubrication. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.

Oil-Embedded Open Bearings—Made from porous bronze saturated with oil, these bearings don’t require lubrication.

Sealed Bearings—These bearings come with seals to retain the grease you add and reduce the need for additional lubrication. They also keep grease off your equipment and prevent dirt from sticking to the chain.

Steel—The go-to for roller chain, steel is strong and economical. It’s best for dry environments since moisture will cause it to rust.

Corrosion-Resistant Nickel-Plated Steel—A step up from plain steel, the nickel plating adds a layer of rust protection in wet environments. However, if scratched, the underlying steel may still rust. The plating may also hinder welding.

Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.

	Roller Chain							Connecting Links		Adding-and-Connecting Links
	Trade No.	Std.	Pitch	Roller Dia.	Roller Wd.	Working Load, lb.	Lubrication		Each		Each
Oil-Embedded Open Bearings







				Steel

				60	ANSI	3/4"	0.469"	31/64"	1,950	Lubricated	00000000	00000	00000000	000000




						Corrosion-Resistant Nickel-Plated Steel

						60	ANSI	3/4"	0.469"	31/64"	1,600	Lubricated	0000000	00000	0000000	00000


						Sealed Bearings







										Steel

										60	ANSI	3/4"	0.469"	1/2"	2,050	Required	000000000	0000	000000000	00000