Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.

Slide these coating strips into metal retainers that you attach to your pulley—they add friction that helps conveyor belts stay on pulleys and are replaceable when they’re worn.

These paint roller covers are woven, so they resist shedding fibers and leave a smoother finish than knitted covers.

These short, narrow roller covers fit behind and between objects.

Use these small, disposable, light foam rollers for quick touch-up jobs.

Fill the bottle-like handle on these rollers with paint and dispense as you roll, so you don't have to stop at a paint tray. Rollers are short for quick touch-up jobs or to fit in tight spaces.

Use these frames to cover large, flat surfaces quickly.

These frames adjust to hold 12", 14", and 18" wide roller covers, so you can take on different-sized jobs with the same frame. Use them to cover large, flat surfaces quickly.

These frames have a telescoping handle that extends from 20.5" to 33".

Give thick coatings a smooth finish with these hard phenolic roller covers. Designed to apply anti-slip coatings to floors, they can also be used with epoxies and other thick protective coatings.

Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.

Coat large curved surfaces of various sizes with these rollers. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces.

After washing brushes and roller covers, insert the paint brush handle into the end of these cleaners or slide the roller cover over them and pump the handle to spin dry.

These urethane rollers are nonmarring and wear resistant.

A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape.

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

A good choice for oily environments, these Buna-N rollers are also abrasion resistant and nonmarring.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Use these SBR rubber rollers with a keyed shaft to prevent slippage in high-torque applications.

Install these rollers without the need for set screws or keyways.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Even with walls as thin as tracing paper, this PET plastic tubing withstands tears and nicks. Thanks to its thin walls, it shrinks down in seconds instead of minutes and at lower temperatures than PVDF and FEP plastic tubing.