Sleeve bearings ride directly on the axle and have no moving parts to wear out.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

Choose the width you need from 6" to 60" in 1/16" increments.

These rollers have 0.78" diameters.

These rollers have diameters 1 3/4" and below.

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

Rollers move in one direction so they won't roll back when idle, keeping packages in place.

Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.

We'll get the between frame width and groove spacing you need in 1/16" increments.

Replace rollers on a chain-driven conveyor.

Drop-in design makes for easy installation.

These ball transfers have capacities up to 3,300 lbs.

Swap out worn inserts instead of replacing the entire mounted unit.

Give thick coatings a smooth finish with these hard phenolic roller covers. Designed to apply anti-slip coatings to floors, they can also be used with epoxies and other thick protective coatings.

These short, narrow roller covers fit behind and between objects.

Made from foam, these paint roller covers don't have any fibers to shed. When used on very smooth surfaces, they create a finish similar to that of a paint sprayer.