Roller Presses | McMaster-Carr

Filter by

For Use On

Width

For Maximum Steel Thickness

Material

Power Source

Maximum Bending Width

Square Wire Size

Roller Diameter

Export Control Classification Number (ECCN)

REACH

RoHS

Number of Rollers

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Wire Diameter

Depth

Diameter

Frame Material

For Maximum Steel Width

Cut Length

Number of Mounting Holes

Jaw Width

Wire Rope Diameter

Mounting Hole Diameter

Height

Minimum Bending Radius

69 Products

Benchtop Rolling Mills

With hardened rollers and precision-machined gears, these rolling mills stand up to heavy use. They’re often used to compress sheets to an uncommon gauge size, convert scrap metal into sheets or wire, or create different thicknesses in a single piece of metal without welding multiple pieces together. After several passes through the mill, you may need to anneal your metal to soften it and prevent cracking.

Manual

Manual mills are gear driven, making them easier to turn than direct-drive rolling mills. Their rollers have grooves so you can form square and half-round wire in addition to sheets.

Gear Speed Ratio—Gear speed ratio indicates the force it takes to turn the output gear. For instance, the manual rolling mill has a 4:1 gear ratio, meaning that you rotate the handle four times to turn the gear powering the rollers once.

	For Max. Steel									Roller					Mounting Holes
	Wd.	Thk.	Square Wire Size	Half-Round Wire Size	Gear Speed Ratio	Ht.	Wd.	Dp.	Handle Lg.	Dia.	No. of	Material	Frame Material	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Brass, Stainless Steel, Steel



		2 9/16"	3/16"	3/64", 5/64", 1/8", 5/32", 3/16", 13/64", 7/32", 15/64", 1/4"	0.098", 0.118", 0.157"	4:1	14"	12"	8"	12"	2 1/2"	2	Steel	Cast Iron	No	6	3/8"	3369N12	0000000

Electric

Electric mills do not require hand cranking, so they provide the power you need to complete high volumes of work. They have flat rollers for creating uniform sheets.

	For Max. Steel						Roller										Mounting Holes
	Wd.	Thk.	Gear Speed Ratio	Ht.	Wd.	Dp.	Dia.	No. of	Material	Frame Material	Power, hp	Max. Rotation Speed, rpm	Current, amp	Voltage, V AC	Cord Lg., ft.	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Brass, Stainless Steel, Steel



		6 1/4"	3/16"	100:1	19"	22"	15"	2 1/2"	2	Steel	Cast Iron	1/2	13	1.7	120	5	No	4	1/2"	3369N11	000000000

Slip Rollers

Create bends, curves, and circles in sheet metal. These machines can form a single curve. The rollers also have wire grooves to shape three sizes of wire. They mount to a table or bench top.

								Roller					Mounting Holes
	Max. Bending Wd.	For Max. Steel Thk.	Min. Bending Radius	For Wire Dia.	Ht.	Wd.	Dp.	Material	Dia.	No. of	Frame Material	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Stainless Steel, Steel



		12"	1/32"	1/2"	1/16", 1/8"	8"	17"	12"	Steel	1"	3	Cast Iron	No	4	3/8"	23815A11	0000000


		24"	1/32"	1"	3/16", 1/4", 5/16"	19"	38"	19"	Steel	2"	3	Iron	No	4	3/8"	2438A35	00000000
		36"	1/32"	1"	3/16", 1/4", 5/16"	19"	51"	19"	Steel	2"	3	Iron	No	4	3/8"	2438A37	00000000
		42"	1/64"	1"	3/16", 1/4", 5/16"	19"	57"	19"	Steel	2"	3	Iron	No	4	3/8"	2438A19	00000000

Roller Swage Presses for Wire Rope End Fittings

Dies are sold separately.

For Wire Rope Dia.	For Wire Rope Material	Material	Overall Lg.	Includes		Each
1/16" to 3/16"	Galvanized Steel, Stainless Steel	Steel	30"	Case	3429T51	000000000

Dies

		For Balls with Shank			For Eyes, Clevis, or Threaded Studs
For Wire Rope Dia.	Material	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1/16"	Steel	2	3429T52	0000000	2	3429T55	0000000
3/32"	Steel	2	3429T53	000000	2	3429T56	000000
1/8"	Steel	2	3429T54	000000	2	3429T57	000000
5/32"	Steel	—	———	0	2	3429T58	000000
3/16"	Steel	—	———	0	2	3429T59	000000

Wire, Rod, and Flat Stock Curvers


Curver	Curver with Stand

Also known as ring rollers, these curvers shape wire, rods, and flat stock into curves and circles. Turn the handle to drive material through the steel rollers. With each pass through the rollers, tighten the tensioner knob in small increments to gradually increase the curve.

Curvers with stand come with three sets of rollers—one for flat stock and two for wire and rods. They can apply pressure from either side of the bottom roller, creating more curve options.

		For Max. Flat Stock										Stand				Mounting Holes
	For Wire Dia.	Thk.	Wd.	For Rod Dia.	Min. Bending Radius	Material	Ht.	Wd.	Dp.	Handle Lg.	Roller Dia.	Ht.	Wd.	Dp.	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Brass, Copper, Stainless Steel, and Steel



		1/4"	3/16"	1"	1/4"	1 1/2"	Steel	5 1/2"	6 1/2"	5 1/2"	13 1/2"	1 1/4"	—	—	—	No	2	3/8"	3330N11	0000000


		1/4", 1/2"	3/16"	1"	1/4", 1/2"	1 3/8"	Steel	6 3/4"	5 1/2"	9 3/4"	9"	1 13/16"	39"	21"	21"	Yes	2	5/16"	3330N12	000000

Bench-Top Roller Swage Presses for Wire Rope End Fittings

Permanently mount this press on a bench top. Dies are sold separately.

For Wire Rope Dia.	For Wire Rope Material	Material	Overall Lg.		Each
1/16" to 9/32"	Galvanized Steel, Stainless Steel	Steel	18"	3429T4	000000000

Dies

		For Balls with Shank			For Eyes, Clevis, or Threaded Studs
For Wire Rope Dia.	Material	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1/16"	Steel	2	3429T23	000000000	2	3429T11	0000000
3/32"	Steel	2	3429T24	00000000	2	3429T12	000000
1/8"	Steel	2	3429T25	00000000	2	3429T13	000000
5/32"	Steel	2	3429T26	00000000	2	3429T14	000000
3/16"	Steel	2	3429T27	00000000	2	3429T15	000000
1/4"	Steel	2	3429T29	00000000	2	3429T17	000000
9/32"	Steel	—	———	0	2	3429T18	000000

Benders

Bend wire and rod up to _1/2" diameter and flat stock up to _1/4"×1" with this rugged steel bender. Use it to create hooks, brackets, and pipe hangers. It can be clamped in a vise.

			For Max. Flat Stock
	Die Dia.	For Max. Wire Dia.	Thk.	Wd.	For Max. Rod Dia.	Material	Lg.	Wd.	Ht.		Each
For Brass, Copper, Stainless Steel, and Steel



		3/4", 1 1/4", 1 5/8"	1/2"	1/4"	1"	1/2"	Steel	20"	2"	5"	2460A11	000000

Depth-Measuring Sheet Metal Bender/Crimpers

The jaws have V-notches in _1/4" increments to measure the depth of bends.

Throat Dp.	Notch Increments	Jaw Wd.	Lg.	Material		Each
1 1/4"	1/4", 1/2", 3/4", 1", 1 1/4"	3 1/4"	8"	Steel	8763A11	0000000

Shears/Benders/Curvers

Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.

When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.

	Max. Bending		For Max. Thk.										Roller				Mounting Holes
	Wd.	Angle	Aluminum	Brass	Copper	Stainless Steel	Steel	Min. Bending Radius	Cut Lg.	Ht.	Wd.	Dp.	Dia.	No. of	Blade Material	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Brass, Copper, Stainless Steel, Steel



		12"	90°	1/32"	1/32"	1/32"	1/64"	1/32"	3/4"	12"	15"	14"	11"	1 1/2"	3	Steel	No	4	0.32"	3333N11	0000000


		30"	90°	3/64"	1/32"	1/32"	1/64"	1/32"	3/4"	30"	23"	32 1/2"	14 1/2"	1 1/2"	3	Steel	No	4	0.32"	3333N12	00000000
		40"	90°	3/64"	1/32"	1/32"	1/64"	1/32"	7/8"	40"	23"	42 1/2"	14 1/2"	1 5/8"	3	Steel	No	4	0.32"	3333N13	00000000

Adjustable-Width Sheet Metal Benders for Bench Vises

Shown with Bench Vise (Sold

Separately)

Shape sheet metal using your bench vise as a sturdy base. Remove or slide the four dies along the clamping bar to form angles, channels, boxes, trays, and pans in a variety of widths. Unlike bench-top and floor-mount benders, these are not permanently mounted—pull them out when you need them and store them when you don’t.

									Base
	Max. Bending Wd.	For Max. Steel Thk.	For Jaw Wd.	Ht.	Wd.	Dp.	Max. Box Dp.	Frame Material	Ht.	Wd.	Dp.	Handle Grip Material	Includes		Each
For Aluminum, Copper, Stainless Steel, Steel



		12 1/2"	1/16"	4" to 8"	11"	13"	2"	1"	Steel	1"	9 1/2"	1/2"	Rubber	One 1" Wide Forming Die One 2 7/8" Wide Forming Die One 2" Wide Forming Die One 5 7/8" Wide Forming Die	3386N11	0000000

Depth-Measuring Sheet Metal Bender/Crimpers for Tight Spaces

Offset handles allow you to use this tool in tight spaces. The jaws have V-notches in _1/4" increments to measure the depth of bends.

Throat Dp.	Notch Increments	Jaw Wd.	Lg.	Material		Each
1 1/4"	1/4", 1/2", 3/4", 1", 1 1/4"	3 1/4"	9"	Steel	8763A12	000000

Floor-Mount Adjustable-Width Sheet Metal Benders

Reinforced construction lets this bender handle thicker material than the bench-top model. Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.

										Mounting Holes
	Max. Bending Wd.	For Max. Steel Thk.	Min. Reverse Bend	Ht.	Wd.	Dp.	Max. Box Dp.	Frame Material	Mounting Fasteners Included	No. of	Dia.	Includes		Each
For Aluminum, Stainless Steel, Steel



		48 1/4"	1/16"	1/4"	53"	72"	36"	4"	Steel	No	4	5/8"	Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights	2437A32	000000000

Hand-Held Sheet Metal Benders for Large Sheets

Make deep folds in roofing panels and other large pieces of sheet metal. Set the throat depth up to 19_5/8". Unlike bench-mount benders, these lightweight benders are easily moved from place to place.

	Jaw Wd.	Max. Bending Angle	For Max. Steel Thk.	Lg.	Ht.	Material		Each
For Aluminum, Stainless Steel, Steel



	3 1/8" to 19 5/8"	19 5/8"	150°	1/64"	31 1/2"	4 1/4"	Steel	3375N11	0000000

Handheld Bead Rollers

With a single tool, create both sharp creases and soft curves along the edges of sheet metal. Also known as edge rollers, these tools slide back and forth along edges to create even bends. Unlike benchtop sheet metal tools, these bead rollers are portable, so they’re often used on-site by roofers. Use 1/8” markings to set up precise bends.

	For Max. Steel Thk.	Max. Bending Angle	Graduations	Numeric Graduations	Lg.	Material		Each
For Aluminum, Stainless Steel, and Steel



	3/8" to 8"	1/32"	90°	1/8"	1"	13 1/2"	Steel	3387N11	0000000

High-Force Duct Crimpers

These tools have five blades and compound-leverage action for more power with less effort than other crimpers. Use them to join pieces of metal duct and gutters. Jaws have V-notches in _1/4" increments to measure the depth of bends.

Throat Dp.	Notch Increments	Jaw Wd.	Lg.	Material		Each
1 1/4"	1/4", 1/2", 3/4", 1", 1 1/4"	7/8"	9 3/4"	Steel	2377A51	000000

Impact Driver Duct Crimpers

Turn your impact driver into a power crimper, and create raised edges on sheet metal more quickly than with hand crimpers. Use on standard 30-24 ga. galvanized steel HVAC ductwork. They work with impact drivers in forward or reverse, so they are comfortable for both right- and left-handed users.

						For Impact Driver
Throat Dp.	Jaw Wd.	Lg.	For Steel Ga.	For Crimp Dp.	Hex Shank Size	Max. Current, amp	Min. Voltage, V DC	Material		Each
1 1/2"	2"	4"	30 to 24	1 1/2"	1/4"	7	12	Steel	3334N11	0000000

Sheet Metal Bead Rollers

Wiring

1/8"

Turning

Burring

Crimping

3/4" Ogee

Beading

Make different edge styles on your sheet metal. It comes with rollers for turning, wiring, burring, beading, and crimping.

							Roller
Throat Dp.	Ht.	Wd.	Dp.	For Max. Steel Thk.	Mount Type	Max. Mounting Surface Thk.	Material	Ctr.-to-Ctr.	Material	Includes		Each



	7"	35"	15 3/8"	21 1/8"	1/64"	C-Clamp	2 3/4"	Steel	2"	Iron	Rollers for Burring, Crimping, Wiring, 1/8" Turning, and 3/4" Ogee Bending	2435A74	000000000

Additional and Replacement Bead Roller Turning Rolls


1/8" Turning	Wiring	Burring	Elbow Edging

3/4" Ogee Beading	1/4" Single Beading	Crimping	Offset

Sheet Metal Roller Type	Material		Pair
1/8" Turning	Steel	2435A75	0000000
Wiring	Steel	2435A76	000000
Burring	Steel	2435A77	000000
Elbow Edging	Steel	2435A91	000000
1/4" Single Beading	Steel	2435A79	000000
3/4" Ogee Beading	Steel	2435A89	000000
Crimping	Steel	2435A88	000000
Offset	Steel	2435A81	000000

Tear-Preventing Sheet Metal Bender/Crimpers

Rounded jaws reduce damage to aluminum and other lightweight metal.

Throat Dp.	Jaw Wd.	Lg.	Material		Each
1"	3 1/2"	8"	Steel	2519A11	0000000

Wire, Rod, and Flat Stock Bender for Complex Shapes

		For Max. Flat Stock
	For Max. Wire Dia.	Thk.	Wd.	For Max. Rod Dia.	Material	Lg.	Wd.	Ht.	Handle Lg.		Each
For Brass, Copper, Stainless Steel, and Steel



		0.3125"	0.125"	1"	0.3125"	Steel	9.5"	2.5"	3.5"	12"	2436A12	0000000

Bench-Top Adjustable-Width Sheet Metal Benders

Shown with Floor Stand

Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.

	Sheet Metal Benders															26" Ht. Floor Stand
										Mounting Holes
	Max. Bending Wd.	For Max. Steel Thk.	Min. Reverse Bend	Ht.	Wd.	Dp.	Max. Box Dp.	Frame Material	Mounting Fasteners Included	No. of	Dia.	Handle Grip Material	Includes		Each		Each
For Aluminum, Stainless Steel, Steel



		48 1/4"	3/64"	1/4"	25"	65"	22"	4"	Steel	No	4	1/2"	Plastic	Five 2" Wide Forming Dies Six 3" Wide Forming Dies Five 4" Wide Forming Dies Removable Apron Insert Apron Stop Rod Counterweights	2489A12	000000000	2489A13	0000000

Economy Benders

Bend wire and rod up to _3/8" diameter and flat stock up to _1/2"×_3/16" to create hooks, brackets, and pipe hangers. They can be clamped in a vise.

			For Max. Flat Stock				Base
	Die Dia.	For Max. Wire Dia.	Thk.	Wd.	For Max. Rod Dia.	Material	Lg.	Wd.	Handle Lg.		Each
For Aluminum, Brass, and Steel



		1/2", 3/4", 1", 1 1/4", 1 1/2"	3/8"	3/16"	1/2"	3/8"	Aluminum	3"	3"	12"	2460A16	000000


		3/4", 2", 3", 4"	3/8"	3/16"	1/2"	3/8"	Aluminum	6"	4"	16"	2460A18	00000

Economy Sheet Metal Benders

Make bends up to 90° in metal sheets to form items such as boxes and trays. Benders attach to your bench top and have a brake bar that adjusts for different stock thicknesses and bend angles.

	Max. Bending								Mounting Holes
	Wd.	Angle	For Max. Steel Thk.	Ht.	Wd.	Dp.	Frame Material	Mounting Fasteners Included	No. of	Dia.		Each
For Aluminum, Stainless Steel, Steel



		18"	90°	3/64"	12 1/2"	21"	9 5/8"	Aluminum	No	4	1/4"	2409A11	000000


		30"	90°	3/64"	3 3/8"	33 1/2"	6 3/4"	Aluminum	No	4	3/8"	2409A12	000000

Hand-Held Sheet Metal Benders for Making Corners


Style B Shown Making a 45° Angle	Style A	Style B

Fold corners in flat metal sheets to create your own bin boxes, drip pans, and other three-dimensional objects. Similar to tucking the corners of a bedsheet, these benders twist and wrap the metal into triangle-shaped folds to form corners. Finish the fold by creasing it with a regular hand-held sheet metal bender.

Style A—Style A benders have a longer throat depth for making deeper corners. They create corners in any angle.

Style B—Style B benders form precise 45° or 90° corners. They have a finger hole for additional gripping options.

	Throat Dp.	Bend Angle	For Max. Steel Thk.	Material		Each
For Aluminum, Stainless Steel, Steel



	A	5 1/2"	Any	1/16"	Steel	3384N12	000000


	B	2", 3 1/8"	45°, 90°	1/64"	Stainless Steel	3384N11	000000

Hand-Held Sheet Metal Benders for Long Folds

Create long, uniform folds on the edges of sheet metal. Insert the end of a sheet into either side of these tools to form _3/8" or 1" deep folds.

	For Max. Steel Thk.	Wd.	Material		Each
For Aluminum, Copper, Stainless Steel, Steel



	3/8", 1"	0.025"	12"	Steel	3377N11	000000


	3/8", 1"	0.025"	18"	Steel	3377N12	00000
	3/8", 1"	0.025"	24"	Steel	3377N13	00000

Sheet Metal Benders

Make bends up to 135° in metal sheets. Benders have a clearance of 4" for insertion and removal of large workpieces such as vehicle panels and duct work. They attach to your bench top and have a removable front edge to make bends that are close together.

	Sheet Metal Benders													Floor Stands
	Max. Bending									Mounting Holes
	Wd.	Angle	For Max. Steel Thk.	Ht.	Wd.	Dp.	Clearance	Frame Material	Mounting Fasteners Included	No. of	Dia.		Each		Each
For Aluminum, Stainless Steel, Steel



		24"	135°	3/64"	9"	32"	15"	4"	Steel	No	3	3/8"	2461A11	0000000	2461A21	0000000


		37"	135°	3/64"	9"	45"	15"	4"	Steel	No	3	3/8"	2461A12	000000	2461A22	000000