Actuate these switches with a fraction of the force of other subminiature switches for increased accuracy. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Smaller than standard size snap-acting switches, these fit in tight spaces. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Enclosures protect these snap-acting switches from the environment. They open and close circuits quickly to minimize arcing and prevent contacts from sticking.

For technical drawings and 3-D models, click on a part number.

With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They’re rated IP68 for protection from dust and temporary submersion. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Small enough to fit in the tiniest spaces, these switches are rated IP67 for protection from temporary submersion. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4 and IP66, these enclosed switches have a sealed actuator for protection from washdowns. They open and close circuits quickly to minimize arcing and prevent contacts from sticking.

For technical drawings and 3-D models, click on a part number.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meet MIL-PRF-8805. They’re sized to fit in the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and elevators.

Switches with a 4-pole micro M12 plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

Switches with powder-coated zinc and plastic housings are rated NEMA 4 and 13 for protection from washdowns and oil/coolant spraying.

For technical drawings and 3-D models, click on a part number.

Secure these switches into panels using mounting nuts. They have a slim body so they can also be stacked together or fit into tight spaces. They're rated IP67 for protection from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and elevators. All have a 4-pole micro M12 plug that connects to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

For technical drawings and 3-D models, click on a part number.

Rated IP67, these switches are protected from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and elevators.

Styles D and E have an actuator that allows you to adjust its height, making it easier to align the switch with the target during installation.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and bin filling operations.

Styles D and E have an actuator that allows you to adjust its height, making it easier to align switch with the target during installation.

Switches with wire leads are rated NEMA 3S and IP69K and protected from rain, snow and sleet, and from high temperature, high pressure jets of water.

For technical drawings and 3-D models, click on a part number.

Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for temporary submersion. They have a slim design and can be stacked together or fit into narrow spaces. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They're often used on conveyor systems and elevators.

For technical drawings and 3-D models, click on a part number.

Shorter and thinner than other safety limit switches, these are sized to fit tight spaces. They protect machinery and ensure the safety of personnel. Positive-force contacts open the circuit when actuated, even if a spring fails or the contacts stick. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and bin filling operations. All are NEMA and IP rated for protection from washdowns.

Styles E and F have an actuator that allows you to adjust its height, making it easier to align switch with the target during installation.

NEMA 13 and IP67 rated switches are protected from oil/coolant spraying and temporary submersion.

For technical drawings and 3-D models, click on a part number.

Protect machinery and ensure the safety of personnel—these switches have positive-force contacts that will open the circuit when actuated even if a spring fails or the contacts stick. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and bin filling operations. All are NEMA and IP rated for protection from washdowns.

Styles E and F have an actuator that allows you to adjust its height, making it easier to align switch with the target during installation.

NEMA 13 and IP67 rated switches are protected from oil/coolant spraying and temporary submersion.

For technical drawings and 3-D models, click on a part number.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated. Pull the knob to reset. Positive-force contacts open the circuit when actuated, even if a spring fails or the contacts stick. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit. They’re often used on conveyor systems and elevators. All are rated IP67 for protection from washdowns and temporary submersion.

Style C switches have an actuator that allows you to adjust its height, making it easier to align switch with the target during installation.

For technical drawings and 3-D models, click on a part number.