About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Track lubricators reduce friction and wear without shutting down equipment. Oil-infused resin distributes lubricant onto rollers, which transfer it to your track.
For technical drawings and 3-D models, click on a part number.
Track Rollers | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | Roller-Mount Track Lubricators | |||||||||||||
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | Each | ||
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 11 | 0.6 | 19,500 | 500 | 750 | 250° | Needle Roller | __ | 00000000 | 0000000 | 0000000 | 000000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 11 | 0.6 | 19,500 | 500 | 750 | 250° | Needle Roller | __ | 00000000 | 00000 | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 11 | 0.6 | 13,000 | 500 | 1,300 | 250° | Needle Roller | __ | 00000000 | 000000 | 0000000 | 00000 |
Steel Flat Rollers without Seal | ||||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 8 | 12 | 0.6 | 7,000 | 1,900 | 1,500 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 | 0000000 | 00000 |
Steel Flat Rollers with Seal | ||||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 8 | 12 | 0.6 | 7,000 | 1,900 | 1,500 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 | 0000000 | 00000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. Some rollers have end seals to block dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Track lubricators reduce friction and wear without shutting down equipment. Oil-infused resin distributes lubricant onto rollers, which transfer it to your track.
For technical drawings and 3-D models, click on a part number.
Track Rollers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller, mm | Stud, mm | Thread | Radial Load Cap., lbs. | Roller-Mount Track Lubricators | |||||||||||||
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | Each | ||
Steel Crowned Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 8 | 0.6 | 1,600 | 820 | 800 | 175° | Needle Roller | Mounting Hardware | 000000 | 000000 | 0000000 | 000000 |
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Ht. Adjustment Capability, mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
Steel Crowned Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia., mm | Overall Wd., mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | ID | ID Tolerance | Each | |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||
16 | 11 | 5 | 12 | 14,000 | 750 | 700 | 210° | Needle Roller | 5mm | -0.008mm to 0mm | 0000000 | 000000 |
Tapered Stud Track Rollers
Install these rollers in worn-out mounting holes or where you don’t have access to the back of the mounting hole. The stud is tapered, so you can quickly secure them in place with a set screw (not included) instead of a nut on the back like traditional rollers. Keep in mind, this reduces their radial capacity.
Rollers with a seal protect rolling elements from dirt and contamination better than shielded rollers, but they do hold more heat. The seal also helps retain lubrication.
Add a grease fitting to create a lubrication point.
For technical drawings and 3-D models, click on a part number.
Side-Mount Track Roller Carriages and Guide Rails
Mount along a wall or other vertical surface.
Carriages with adjustable rollers can be adjusted for a snug or loose fit on the rail (also known as preload).
Carriages with wipers sweep away dust and other contaminants.
For technical drawings and 3-D models, click on a part number.
Carriages with Adjustable Rollers | Guide Rails | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Roller Dia., mm | Max. Temp., °F | Each | Rail Lengths, mm | Per mm | ||
Aluminum Carriages with Plastic Wipers and Steel Rollers | |||||||||||
30 | 220 | 28 | 25 | 87 | 16 | 175° | 00000000 | 0000000 | 0000000 | 00000 | |
30 | 220 | 28 | 25 | 112 | 16 | 175° | 00000000 | 000000 | 0000000 | 000 | |
30 | 330 | 28 | 25 | 137 | 16 | 175° | 00000000 | 000000 | 0000000 | 000 |