McMaster-Carr logo
    Filter by
    System of Measurement
    Roller Width
    Attribute Image
    Roller Mount Type
    Bearing Type
    Industrial Info Compare
    Roller Profile
    Hardness Rating
    Guide Roller Type
    Stud Diameter
    Attribute Image
    Track Roller Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    49 Products

    Abrasion-Resistant Idler Rollers

    Image of Product. Front orientation. Idler Rollers. Abrasion-Resistant Idler Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Abrasion-Resistant Idler Rollers.
    These urethane rollers are nonmarring and wear resistant. Commonly found in conveyor systems and printing equipment, they spin freely on a shaft or stud to position and guide work.
    Roller
    Dia.
    Wd.
    For Shaft
    Dia.
    Shaft Mount
    Type
    Bearing
    Type
    Lubrication
    Lubricant
    Temp. Range,
    ° F
    Choose a Hardness (Hardness Rating)
    Each
    Urethane Rubber Roller with 841 Bronze Bearing
    3/8"1/4"1/8"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2483K61000000
    1/2"1/4"1/8"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2483K6300000
    1/2"1/4"3/16"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2483K6400000
    1/2"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K12100000
    5/8"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2483K7200000
    3/4"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K12700000
    7/8"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K10300000
    1"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K10600000
    1 1/4"1/4"1/4"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K10800000
    1 1/2"1/4"3/8"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K10100000
    1 1/2"1/4"1/2"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K11300000
    2"1/4"1/2"Slip FitPlain
    		LubricatedChemlube SAE30 AM #1-40 to 180Durometer 55A (Medium) Black2483K10200000
     

    Nonstick Idler Rollers

    Image of Product. Front orientation. Idler Rollers. Nonstick Idler Rollers, MDS-Filled Nylon Bearing.
    Image of Product. Front orientation. Idler Rollers. Nonstick Idler Rollers, UHMW Polyethylene Bearing.
    Image of Attribute. Front orientation. Contains Annotated. Nonstick Idler Rollers.

    MDS-Filled

    Nylon Bearing

    UHMW

    Polyethylene

    Bearing

    A slippery UHMW polyethylene surface means these rollers won't stick to adjacent parts. Rollers are also highly corrosion resistant. Commonly found in conveyor systems and printing equipment, idler rollers spin freely on a shaft or stud to position and guide work.
    MDS-Filled Nylon Bearing—Rollers with MDS-filled nylon bearing have a rigid, wear- and abrasion-resistant bearing for increased life over all-UHMW rollers.
    Roller
    Dia.
    Wd.
    For Shaft
    Dia.
    Shaft Mount
    Type
    Bearing
    Type
    Lubrication
    Temp. Range,
    ° F
    Hardness (Hardness Rating)
    Each
    UHMW Polyethylene Roller with MDS-Filled Nylon Bearing
    5/8"1/4"1/4"Slip FitPlain
    		Not Required-22 to 180Durometer 68D (Extra Hard) White1568T57000000
     
    UHMW Polyethylene Roller with UHMW Polyethylene Bearing
    3/8"1/4"1/8"Slip FitPlain
    		Not Required-22 to 180Durometer 68D (Extra Hard) White1568T100000
    1/2"1/4"1/8"Slip FitPlain
    		Not Required-22 to 180Durometer 68D (Extra Hard) White1568T300000
    5/8"1/4"1/4"Slip FitPlain
    		Not Required-22 to 180Durometer 68D (Extra Hard) White1568T700000
     

    Tight-Tolerance Drive Rollers

    Image of Product. Front orientation. Drive Rollers. Tight-Tolerance Drive Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Tolerance Drive Rollers.
    The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. The urethane rubber surface is nonmarring and wear resistant.
    Roller
    Set Screws
    Dia.
    Wd.
    For Shaft
    Dia.
    Hub
    Wd.
    Shaft Mount
    Type
    No.
    Required
    Included
    Temp. Range,
    ° F
    Choose a Hardness (Hardness Rating)
    Each
    Urethane Rubber Rollers with Aluminum Hub
    3/8"1/4"1/8"1/4"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K33000000
    1/2"1/4"3/16"1/4"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K3400000
    1/2"1/4"1/4"1/4"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K3500000
    1 1/4"1/4"5/16"5/16"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K4600000
    1 5/8"1/4"3/8"3/8"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K4800000
    2"1/4"3/8"3/8"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2481K8300000
     

    Shaft-Mount V-Groove Track Rollers

    Image of Product. Front orientation. Track Rollers. Shaft-Mount V-Groove Track Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Track Rollers. Shaft-Mount V-Groove Track Rollers.
    Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
    With Seal—Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
    Roller
    Groove
    Load
    Capacity, lb.
    Dia.
    Wd.
    For Shaft
    Dia., mm
    Overall
    Wd.
    Wd.
    Dp.
    Max. Rotation
    Speed, rpm
    Static
    Radial
    Dynamic
    Radial
    Static
    Thrust
    Max. Temp.,
    ° F
    Bearing
    Type
    Features
    Each
    Steel V-Groove Rollers With Seal
    9/16"1/4"41/4"1/8"1/16"7,00014014020210Ball Bearing
    		—6321K73000000
     
    Steel V-Groove Rollers Without Seal
    9/16"1/4"41/4"1/8"1/16"7,00014014020245Ball Bearing
    		Shielded6321K7100000
     
    440C Stainless Steel V-Groove Rollers Without Seal
    9/16"1/4"41/4"1/8"1/16"7,00012012020500Ball Bearing
    		Shielded6321K7200000
     

    Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers

    Image of Product. 303 Stainless Steel. Front orientation. Track Rollers. Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers, 303 Stainless Steel Flat Rollers With Seal.
    Image of Attribute. Front orientation. Contains Annotated. Track Rollers. Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers.

    303 Stainless Steel

    These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
    303 Stainless Steel Rollers—303 stainless steel rollers are more corrosion resistant than 440C stainless steel rollers.
    Roller
    Stud
    Thread
    Shoulder
    Load
    Capacity, lb.
    Dia.
    Wd.
    Dia.
    Lg.
    Size
    Lg.
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Static
    Radial
    Dynamic
    Radial
    Static
    Thrust
    Max. Temp.,
    ° F
    Bearing
    Type
    Includes
    Each
    303 Stainless Steel Flat Rollers With Seal
     
    Slotted Roller-Head Drive
    3/8"1/4"1/8"7/16"4-40
    		1/4"3/16"1/16"1,5003010020245Ball Bearing
    		Mounting Hardware3668K11000000
     

    Abrasion-Resistant Low-Profile Drive Rollers

    Image of Product. Front orientation. Drive Rollers. Abrasion-Resistant Low-Profile Drive Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Abrasion-Resistant Low-Profile Drive Rollers.
    The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power. The urethane rubber surface is nonmarring and wear resistant.
    Roller
    Set Screws
    Dia.
    Wd.
    For Shaft
    Dia.
    Shaft Mount
    Type
    No.
    Required
    Included
    Temp. Range,
    ° F
    Choose a Hardness (Hardness Rating)
    Each
    Urethane Rubber Rollers with Aluminum Hub
    3/8"1/4"1/8"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K33000000
    1/2"1/4"3/16"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K3400000
    1/2"1/4"1/4"Set Screw1Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K3500000
    1"1/4"1/4"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K4400000
    1 1/4"1/4"5/16"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K4600000
    1 5/8"1/4"3/8"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K4800000
    2"1/4"3/8"Set Screw2Yes-40 to 180Durometer 55A (Medium) Blue, Durometer 70A (Hard) Orange2488K8300000
     

    Press-Fit Low-Profile Drive Rollers

    Image of Product. Front orientation. Drive Rollers. Press-Fit Low-Profile Drive Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Press-Fit Low-Profile Drive Rollers.
    Install these rollers without the need for set screws or keyways. With a nonprotruding hub, they fit where standard drive rollers can’t. Also known as contact wheels and feed rollers, drive rollers spin in unison with shaft or stud to transmit power. These urethane rubber rollers are nonmarring and wear resistant.
    Roller
    Dia.
    Wd.
    For Shaft
    Dia.
    Shaft Mount
    Type
    Temp. Range,
    ° F
    Hardness (Hardness Rating)
    Each
    Urethane Rubber Rollers with Aluminum Hub
    1/2"1/4"1/4"Press Fit-40 to 180Durometer 55A (Medium) Black2473K51000000
    5/8"1/4"1/4"Press Fit-40 to 180Durometer 55A (Medium) Black2473K5500000
    3/4"1/4"1/4"Press Fit-40 to 180Durometer 55A (Medium) Black2473K5900000
    1"1/4"1/4"Press Fit-40 to 180Durometer 55A (Medium) Black2473K6600000
    1 1/4"1/4"1/4"Press Fit-40 to 180Durometer 55A (Medium) Black2473K7100000
    1 1/2"1/4"1/2"Press Fit-40 to 180Durometer 55A (Medium) Black2473K7500000
    2"1/4"1/2"Press Fit-40 to 180Durometer 55A (Medium) Black2473K7800000
     

    Drive Rollers

    Image of Product. Front orientation. Drive Rollers. Drive Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Drive Rollers.
    Tapped hubs allow you to mount these drive rollers onto a shaft or stud to transmit power. Also known as contact wheels and feed rollers.
    Urethane Rubber Roller—Urethane rubber rollers resist abrasion, wear, and oil. They’re also nonmarring.
    Roller
    Hub
    Set Screws
    Dia.
    Wd.
    For Shaft
    Dia.
    Dia.
    Wd.
    Shaft Mount
    Type
    No.
    Required
    Included
    Thread
    Size
    Temp. Range,
    ° F
    Hardness (Hardness Rating)
    Each
    Urethane Rubber Rollers with Aluminum Hub
    5/8"1/4"1/4"1/2"1/4"Set Screw1Yes8-32
    		-40 to 180Durometer 55A (Medium) Black60885K119000000
    3/4"1/4"1/4"1/2"1/4"Set Screw1Yes8-32
    		-40 to 180Durometer 55A (Medium) Black60885K12400000
    7/8"1/4"1/4"1/2"1/4"Set Screw1Yes8-32
    		-40 to 180Durometer 55A (Medium) Black60885K12700000
    1"1/4"1/4"1/2"1/4"Set Screw1Yes8-32
    		-40 to 180Durometer 55A (Medium) Black60885K13100000
    1 1/4"1/4"5/16"5/8"5/16"Set Screw2Yes8-32
    		-40 to 180Durometer 55A (Medium) Black60885K11300000
    1 5/8"1/4"3/8"7/8"3/8"Set Screw2Yes10-32
    		-40 to 180Durometer 55A (Medium) Black60885K11500000
    2 1/8"1/4"1/2"1"3/8"Set Screw2Yes10-32
    		-40 to 180Durometer 55A (Medium) Black60885K10100000
     
    Set Screws
    Pkg.
    Qty.
    Pkg.
    8-32 Stainless Steel Cup-Point Set Screws10092311A18800000
    10-32 Stainless Steel Cup-Point Set Screws10092311A4220000
    back to top