About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Drive Rollers


Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Thread Size | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Aluminum Hub | ||||||||||||
3" | 2" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | No | 1/4"-28 | -30° to 200° | 55A (Medium) Black | 00000000 | 000000 |
Abrasion-Resistant Flex-Grip Drive Rollers



These urethane rollers are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||||||
3" | 2" | 1/2" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 000000 |
3" | 2" | 5/8" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
3" | 2" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 1/2" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
5" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
5" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
6" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
6" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Flex-Grip Press-Fit Drive Rollers




Mount these rollers directly onto your shaft without the need for set screws or keyways. They have a press-fit hub, but you can add your own hub to create a custom roller. Made of urethane, they are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers spin with the shaft or stud to transfer power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||
2 1/2" | 2" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
2 1/2" | 2" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||
4" | 2" | 3/4" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
4" | 2" | 1" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Keyed Drive Rollers



These urethane rollers are wear and chemical resistant. They’re also nonmarring. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 1 1/2" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||||||
2" | 2" | 3/4" | 3/16" | 3/32" | 2 3/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 0000000 |
2 1/2" | 2" | 3/4" | 3/16" | 3/32" | 2 3/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 000000 |
Urethane Roller with Steel Hub | |||||||||||||
3" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 00000 |
3" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 00000 |
4" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 00000 |
4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
5" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
6" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
6" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
8" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
8" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
Keyed Drive Rollers



These rollers are made of SBR rubber. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 3" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
SBR Rubber Roller with Cast Iron Hub | |||||||||||||
3" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 000000 |
3" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 00000 |
4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 00000 |
5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 000000 |
6" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 00000 |
8" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 000000 |
Threaded Idler Rollers


Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Includes | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Stud | |||||||||||||
6" | 2" | 1/2" | 1 1/8" | 1/2"-13 | 1" | Ball | Lubricated | Tena-Film #2500-2-ST | -40° to 200° | Mounting Hardware | 60A (Medium) Black | 00000000 | 0000000 |
High-Load Threaded Track Rollers


With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers with Seal | |||||||||||||||
3 1/2" | 2" | 1 3/4" | 2 3/4" | 1 3/4"-12 | 1 3/8" | 2 23/64" | 1/16" | 940 | 53,000 | 24,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
Maintenance-Free Threaded Track Rollers

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
For technical drawings and 3-D models, click on a part number.

Roller | Stud | Thread | Shoulder | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
3 1/2" | 2" | 1 3/8" | 2 3/4" | 1 3/8"-12 | 1 3/8" | 2 5/8" | 1/32" | 1,200 | 810 | 250° | Plain | Mounting Hardware | 00000000 | 0000000 |
Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.

Roller | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | ID | ID Tolerance | Each | |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||
3 1/2" | 2" | 1 1/8" | 2 1/16" | 800 | 63,000 | 22,000 | 220° | Needle Roller | 1 1/8" | -0.0005" to 0.0001" | 0000000 | 0000000 |
High-Load Shaft-Mount Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.


Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||
3 1/2" | 2" | 1 1/8" | 2 1/16" | 2,900 | 53,000 | 36,100 | 250° | Cylindrical Roller | 0000000 | 0000000 |
Thrust-Load-Rated Shaft-Mount Track Rollers


These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as yoke-style cam followers, they have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers with Seal | |||||||||||
3 1/2" | 2" | 1 1/8" | 2 1/16" | 2,100 | 27,200 | 18,600 | 15,400 | 250° | Tapered Roller | 0000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers


Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||
5" | 2" | 1 1/8" | 2 1/16" | 1 1/2" | 3/4" | Not Rated | 27,200 | 17,000 | 13,000 | 225° | Tapered Roller | 0000000 | 0000000 |
Flanged Shaft-Mount Track Rollers


Shaft-mount track rollers have more mounting flexibility than threaded track rollers. Because they’re flanged, they can handle both radial and thrust (top and side) loads. The flange also provides guidance and helps rollers stay on track. All are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Shoulder | Flange | Static Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Dia. | Lg. | OD | Thick. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||||||
3 1/2" | 2" | 1 1/8" | 2 1/16" | 2" | 1/32" | 4 7/16" | 19/32" | 2,100 | 27,200 | 13,100 | 225° | Tapered Roller | 0000000 | 0000000 |
Seam Rollers



Roll the seams where wall coverings meet for an even, continuous appearance.
Plastic rollers are good for light duty applications such as wallpaper. Rollers with an oval shape offer more pressure control than round rollers.
Stainless steel rollers resist corrosion and have better pressure control than plastic rollers, which helps you smooth out seams and air bubbles on wall coverings. Use these rollers for heavy duty applications, such as construction, roofing tape, countertops, and set tile.