Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

The open-end design leaves more room for connections than other thimbles.

Cut a sleeve to size, slip it over your rope, and shrink with a heat gun.

Protect the inside of rope loops from fraying.

Compress sleeves with less effort than standard compression tools.

The spring-loaded latches on these hooks snap back into place, securing your load.

These hooks have closed ends on both sides.

Bend these S-hooks by hand to hang large and small objects from almost any surface.

Use these S-hooks for lifting applications.

The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.

Weld these stubs to parts or use them to push objects apart instead of pulling them together.

The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.