Shock-Absorbing Grip-Tight Rope—Not for Lifting
Use this nylon rope when you need to compensate for sudden force, such as in towing applications or dock lines. It is rot and mildew resistant. When wet, the rope can lose up to 20% of its strength. The twisted construction gives this rope a grooved surface, allowing you to grip it tight without it slipping.
Note: The safety factor for capacity is 12:1.
Extra-Grip-Tight Rope—Not for Lifting
Softer than all other grip-tight rope, this manila rope is more comfortable to grip. Its twisted construction gives it a grooved surface, so you can grip it tight without it slipping.
Note: The safety factor for capacity is 12:1.
Shock-Absorbing Wear-Resistant Rope—Not for Lifting
A braided nylon core protected by a braided cover makes this rope resistant to both wear and sudden forces, such as those found in towing applications and dock lines. The braided construction also prevents the rope from rotating under load. When wet, this rope can lose up to 20% of its strength. It resists rot.
Nylon-covered rope resists mildew.
Note: The safety factor for capacity is 12:1.
Rope with Eye on Both Ends—Not for Lifting
Rope has an eye on both ends to save time when attaching to tie downs and hooks. It knots easily and won’t rotate under load. Nylon rope compensates for sudden force, such as those often found in towing applications and dock lines. It resists rot and mildew.
Rope with a braided core resists wear during use because it has a braided cover.
Note: The safety factor for capacity is 12:1.
Eye | ||||||||
|---|---|---|---|---|---|---|---|---|
| Length | Dia. | Capacity, lbs. | Max. Temperature, °F | Style | Lg. | Color | Each | |
Nylon—Braided Nylon Cover with Braided Core | ||||||||
| 30 ft. | 1 1/4" | 4,500 | 150° | Woven | 6" | Red | 0000000 | 0000000 |
Crosby Forged Single-Saddle Wire Rope Clamps—Not for Lifting
These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. They’re also known as wire rope clips. Clamps have a thick coating for corrosion resistance.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Clamp | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Rope Dia. | No. of Clamps Required | Rope Turnback | For Wire Rope Construction | Wd. | Ht. | Thick. | Color | Required Torque, ft.-lbs. | Capacity | Specifications Met | 1-9 | 10-Up | |
Galvanized Steel | |||||||||||||
| 1 1/4" | 7 | 44" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 4 3/16" | 5 5/16" | 3 3/16" | Red | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 000000 | 000000 |
Medium Duty Wire Rope Thimbles—Not for Lifting
Also known as standard-pattern thimbles, these provide better protection against fraying than light-duty thimbles.
Zinc-plated and galvanized steel thimbles are corrosion resistant.
Warning: Do not use with coated rope unless the coating is removed.
Loop | |||||
|---|---|---|---|---|---|
| For Wire Rope Dia. | Inside Lg. | Inside Wd. | Specifications Met | Each | |
Galvanized Steel | |||||
| 1 1/8", 1 1/4" | 4 1/2" | 2 3/4" | Fed. Spec. FF-T-276B | 0000000 | 000000 |