UV-Resistant Wet-Environment Grip-Tight Rope—Not for Lifting
Also known as truck tie-down rope, this rope has added UV-ray inhibitors to protect it from deterioration when used outdoors. Rope is polypropylene so it floats in water, resists rot, and doesn’t lose strength when wet. It also resists acid, oil, and gas. The twisted construction gives rope a grooved surface, allowing you to grip it tight without it slipping.
Note: The safety factor for capacity is 12:1.
Comfort-Grip Low-Stretch Grip-Tight Rope—Not for Lifting
Made of a spun polyester blend, this rope is 15% lighter than standard polyester rope and easier on your hands. This rope is often used in applications that require minimal stretch, such as in tie-down applications. It resists UV rays, rot, oil, and gas, and it will not lose strength when wet. The twisted construction gives rope a grooved surface, allowing you to grip it tight without it slipping.
Note: The safety factor for capacity is 12:1.
Shock-Absorbing No-Flatten Rope—Not for Lifting
Use this nylon rope when you need to compensate for sudden force, such as in towing applications or dock lines. Rope is rot and mildew resistant, but it can lose up to 20% of its strength when wet. Solid braided construction keeps the rope from flattening during use and disperses wear evenly, making it a good choice for high-friction applications, such as passing through pulleys. It knots easily and does not rotate under load.
Note: The safety factor for capacity is 12:1.
Shock-Absorbing Wear-Resistant Rope—Not for Lifting
A braided nylon core protected by a braided cover makes this rope resistant to both wear and sudden forces, such as those found in towing applications and dock lines. The braided construction also prevents the rope from rotating under load. When wet, this rope can lose up to 20% of its strength. It resists rot.
Nylon-covered rope resists mildew.
Polyester-covered rope resists UV rays, oil, and gas.
Polyurethane-coated rope is good for high-friction applications since its coating gives it increased wear resistance.
Note: The safety factor for capacity is 12:1.
Comfort-Grip Shock-Absorbing Wear-Resistant Rope—Not for Lifting
Also known as sash cord, this rope has a soft cotton cover, so you can grip it without hurting your hands. It's made of nylon to compensate for sudden force, such as in towing applications or dock lines. The braided cover protects the braided core from wear during use. The rope resists rot and mildew. When wet, it can lose up to 20% of its strength. It knots easily and does not rotate under load.
Note: The safety factor for capacity is 12:1.
| Dia. | Capacity, lbs. | Max. Temperature, °F | Cover Material | Color | Length, ft. | Each | |
Nylon  | |||||||
|---|---|---|---|---|---|---|---|
| 7/16" | 250 | 150° | Cotton | White with Red Strands | 100 | 0000000 | 000000 |
Low-Stretch Wear-Resistant Rope—Not for Lifting
Choose this polyester rope for applications that require minimal stretch, such as in tie-down applications. A braided cover protects the braided core from wear during use. The rope resists UV rays, rot, oil, and gas, and will not lose strength when wet. It knots easily and does not rotate under load.
Polyurethane-coated rope is good for high-friction applications since its coating gives it increased wear resistance.
Note: The safety factor for capacity is 12:1.
Shock-Absorbing Flexible Rope—Not for Lifting
Made of nylon with a strand core, this rope bends freely and compensates for sudden forces, such as those found in towing applications and dock lines. You can peel back the cover and remove the core strands to use it in light duty applications, such as tying items together.
Rope with a polyester cover resists UV rays, rot, oil, and gas.
Note: The safety factor for capacity is 12:1.
For technical drawings and 3-D models, click on a part number.
Shock-Absorbing Easy-Splice Rope—Not for Lifting
Made from nylon, this rope compensates for sudden force, such as in towing applications and dock lines. A polyurethane coating gives this rope wear resistance for high-friction applications. It’s braided with a hollow core, so it’s easier to splice than other rope when adding a fitting or connecting rope together. It doesn’t rotate under load.
Note: The safety factor for capacity is 12:1.
Low-Stretch Easy-Splice Rope—Not For Lifting
Often used to tie items down, this rope is made of polyester, which resists stretching. The braided construction and hollow core make it easier to splice than other rope, so you can add a fitting or connect rope together. A polyurethane coating gives this rope wear resistance for high-friction applications.
Note: The safety factor for capacity is 12:1.
For technical drawings and 3-D models, click on a part number.
High-Temperature Wear-Resistant Rope—For Lifting
Because it's made of a high-performance aramid also known as Technora, this rope keeps its strength in high heat and is chemical and corrosion resistant. The braided cover protects the braided core from wear during use. Rope knots easily and does not rotate under load.
Rope with a polyester cover resists UV rays, rot, oil, and gas.
Rope with an aramid cover withstands higher temperatures than rope with a polyester cover.
Note: The safety factor for capacity is 5:1. Warning: Never use to lift people or items over people.
Wet-Environment Wear-Resistant Rope—For Lifting
Strong even when wet, this rope is a high-performance polyethylene comparable to Spectra and Dyneema. It is commonly used as a lightweight alternative to wire rope due to its superior strength to weight ratio. The braided cover protects the braided core from wear during use. This rope knots easily and won’t rotate under load. Made of polyester, the cover also resists UV rays, rot, oil, and gas.
Polyurethane-coated rope is good for high-friction applications since its coating gives it increased wear resistance. This rope is also core supported, so the rope holds the weight of a load with its core. This means if the cover is damaged, you can repair it without impacting the rope’s capacity.
Note: The safety factor for capacity is 5:1. Warning: Never use to lift people or items over people.
Wet-Environment Easy-Splice Rope—For Lifting
Also known as Dyneema and comparable to Spectra, this rope is made of high-performance polyethylene that remains strong even when wet. It is often used as a lightweight alternative to wire rope. This rope resists UV rays and will float in water. It's braided with a hollow core, so it's easier to splice than other rope for adding a fitting or connecting rope together. It knots easily and does not rotate under load. A polyurethane coating provides additional resistance to wear in high-friction applications.
Note: The safety factor for capacity is 5:1. Warning: Never use to lift people or items over people.
Extra-Flexible Wire Rope—Not for Lifting
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys. It is often used for hanging, tethering, and constructing barriers. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Strand and IWRC core are more crush resistant than fiber core.
For technical drawings and 3-D models, click on a part number.
Wire Rope—For Lifting
This wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Ultra-Flexible Wire Rope—For Lifting
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Ultra-Flexible Corrosion-Resistant Wire Rope—For Lifting
Choose this stainless steel wire rope when lifting in corrosive environments, such as areas that are frequently washed down. More wires per stand than other wire rope provides the flexibility required for repeat bending over drums and pulleys. Individual wire strands are preformed to maintain its shape when cut and prevent unraveling.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Wire Rope—For Lifting
Choose this stainless steel wire rope when lifting in corrosive environments, such as areas that are frequently washed down. This wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
18-8 stainless steel has good corrosion resistance.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Wear-Resistant Wire Rope—For Lifting
Flattened outer strands create a smooth surface area that spreads contact to reduce wear. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Rotation-Resistant Wire Rope—For Lifting
To counteract rotation while under load, the outer strands are wound in the opposite direction of the core. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
