Made of a polyester/polypropylene blend, this rope is approximately 15% lighter than standard polyester rope. Use it for applications that require minimal stretch, such as in tie-down applications. It resists UV rays, rot, oil, and gas, and will not lose strength when wet. The twisted construction gives it a grooved surface, allowing you to grip it tight without it slipping.

Note: The safety factor for capacity is 12:1.

Made from nylon, this rope compensates for sudden force, such as in towing applications and dock lines. A polyurethane coating gives this rope wear resistance for high-friction applications. It’s braided with a hollow core, so it’s easier to splice than other rope when adding a fitting or connecting rope together. It doesn’t rotate under load.

Note: The safety factor for capacity is 12:1.

This wire rope won't spin or twist loads in the air. The outer strands twist in the opposite direction of the inner strands to keep loads stable when lifted or suspended. They're often used to lift and lower elevators without any unwanted movement.

Warning: Never use wire rope to lift people or items over people.

Lift everything from heavy machinery to timber. With more than twice as many individual wires as standard wire rope, it bends easily without wear. Use it with cranes and hoists.

Warning: Never use wire rope to lift people or items over people.

Kits include clamps and thimbles to protect the inside of wire rope loops from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. They’re also known as wire rope clips. Clamps have a thick coating for corrosion resistance.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Our most flexible wire rope. It contains the most individual wires within it, so it can bend around a small radius repeatedly without wear. Loop it around small pulleys and sheaves to lift and suspend equipment and materials.

Warning: Never use wire rope to lift people or items over people.

Install with a compression tool to create a strong, permanent loop. Compression sleeves are also known as ferrules, crimps, swaging, and splicing sleeves. They're compatible with Nicopress compression tools.

Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

These clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. They provide a saddle for both the long (live) and the short (dead) end of the wire rope. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. Also known as fist grip wire rope clips.

Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

Compress sleeves with more strength than hydraulic hand tools.