Monitor the flow rate of air and other gases from your instrument panel—these flowmeters have fittings on the back for panel mounting.

Instead of a scale calibrated to a specific gas’ flow rate, these flowmeters measure in millimeters and include a conversion chart, so you can check the flow rate of water and multiple gases without any calculations.

Instead of a scale, these flowmeters have a large dial that makes it easy to read the flow rate of your gas from a distance.

Check the flow rate of liquids in your system.

To avoid metal contaminating liquids, such as deionized water, these flowmeters are made entirely of plastic and rubber.

A 304 stainless steel case protects these flowmeters from blows that could shatter the glass body.

Easily install the unthreaded ends of these flowmeters into a PVC piping system.

Monitor the flow rate of liquids and use the integrated switch to turn equipment on and off, or activate an alarm when liquid reaches a set flow rate.

Fittings on the back let you install these flowmeters in instrument panels.

Install these flowmeters in an instrument panel to measure the flow rate of hot water and other liquids reaching up to 212° F.

If the oil in your line is too hot or pressurized for standard flowmeters, use these flowmeters to measure the flow rate.

Measure the total amount of liquid flowing through these totalizers.

Use these totalizers to measure the total amount of liquid up to 200° F flowing through your pipe system.

Often used in heating, cooking, and power-generating systems, these totalizers measure the total amount of natural gas, propane, and butane that flow through them.

Meeting NSF/ANSI 61, these totalizers measure the cumulative amount of drinking water flowing through them.

Determine the amount of gasoline, diesel fuel, and kerosene that flows through these totalizers.

Install this totalizer on your grease gun or valve to measure grease dispensing and reduce waste.

Often used in hard-to-access areas, these flowmeter/totalizers have a display that can be placed up to 25 feet from the sensor. They connect to unthreaded PVC pipe.

Easy to remove for cleaning and maintenance, these flowmeter/totalizers connect to sanitary quick-clamp fittings (often called tri-clamp fittings) and measure the flow rate and volume of liquid passing through your system.

The unthreaded ends of these flowmeter/totalizers install into a PVC piping system, so you can measure the flow rate and volume of liquid passing through your system.