McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    90 Products

    Rotary Tool Engraving Bit Kits for Dremel Grinders

    Image of Product. Front orientation. Rotary Tool Engraving Bits. Rotary Tool Engraving Bit Kits for Dremel Grinders.
    For engraving and carving, these kits contain a variety of Dremel-compatible bits.
    No. of
    Pieces
    For Mfr. Model No.
    Includes
    Each
    1/8" Diameter Shank
    11100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260Four Engraving Cutters, Seven Grinding Bits, Plastic Storage Case4757N11000000
     

    Engraving End Mills

    Image of ProductInUse. Engraving Cut Style. Front orientation. Engraving Cut Style. Engraving End Mills.

    Engraving Cut

    Style

    Image of Product. Front orientation. End Mills. Engraving End Mills, 1 Flute.

    1 Flute

    Image of Product. Front orientation. End Mills. Engraving End Mills, 2 Flutes.

    2 Flutes

    Image of Product. Front orientation. End Mills. Engraving End Mills, 3 Flutes.

    3 Flutes

    A fine-point tip cuts lettering, numbering, and designs in a variety of metals and composites, such as aluminum, fiberglass, and titanium. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.
    Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs. They stay sharper than coated end mills when used on soft materials like aluminum, leaving a better finish.
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide and Aluminum Titanium Nitride (AlTiN)-Coated Carbide—Use end mills coated with titanium aluminum nitride (TiAlN) or aluminum titanium nitride (AlTiN) for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated end mills. They dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication.
    1 Flute—End mills with one flute are best where fine detail is required. They evacuate chips and dissipate heat better than end mills with more flutes, which extends tool life.
    2 Flutes—End mills with two flutes can both engrave and chamfer, which reduces the need for multiple tools. Two-flute end mills are stronger than one-flute end mills and evenly distribute the cutting force for a better surface finish.
    3 Flutes—Three flute end mills have the strongest tip that resists breaking. Precision-ground to a sharp point, these are commonly used to engrave serial numbers, logos, signage, and to create molds and dies. They distribute cutting force and resist heat build-up better than two-flute end mills for improved surface finish and tool life.
    Mill
    Tip
    Dia.
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Overall
    Lg.
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Carbide
     
    1 Flute—30° Cutting Angle
    0.015"1/8"-0.001" to 0.001"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N11000000
    0.015"3/16"-0.001" to 0.001"3/16"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1500000
    0.015"1/4"-0.001" to 0.001"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1900000
    0.015"3/8"-0.001" to 0.001"3/8"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2400000
    0.015"1/2"-0.001" to 0.001"1/2"3"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2800000
     
    1 Flute—60° Cutting Angle
    0.015"1/8"-0.001" to 0.001"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1200000
    0.015"3/16"-0.001" to 0.001"3/16"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1600000
    0.015"1/4"-0.001" to 0.001"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2100000
    0.015"3/8"-0.001" to 0.001"3/8"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2500000
    0.015"1/2"-0.001" to 0.001"1/2"3"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2900000
     
    1 Flute—90° Cutting Angle
    0.015"1/8"-0.001" to 0.001"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1300000
    0.015"3/16"-0.001" to 0.001"3/16"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1700000
    0.015"1/4"-0.001" to 0.001"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2200000
    0.015"3/8"-0.001" to 0.001"3/8"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2600000
    0.015"1/2"-0.001" to 0.001"1/2"3"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N3100000
     
    1 Flute—120° Cutting Angle
    0.015"1/8"-0.001" to 0.001"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1400000
    0.015"3/16"-0.001" to 0.001"3/16"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N1800000
    0.015"1/4"-0.001" to 0.001"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2300000
    0.015"3/8"-0.001" to 0.001"3/8"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N2700000
    0.015"1/2"-0.001" to 0.001"1/2"3"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N3200000
     
    3 Flutes—30° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32400000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32800000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33300000
     
    3 Flutes—60° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32500000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32900000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33400000
     
    3 Flutes—90° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32600000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33100000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33500000
     
    3 Flutes—120° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32700000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33200000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33600000
     
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
     
    1 Flute—30° Cutting Angle
    0.015"1/8"-0.0003" to 0"1/8"1 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4100000
    0.015"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4400000
    0.015"1/4"-0.0003" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4600000
     
    1 Flute—60° Cutting Angle
    0.015"1/8"-0.0003" to 0"1/8"1 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4200000
    0.015"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4500000
    0.015"1/4"-0.0003" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4700000
     
    1 Flute—90° Cutting Angle
    0.015"1/8"-0.0003" to 0"1/8"1 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4300000
    0.015"1/4"-0.0003" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N4800000
     
    Aluminum Titanium Nitride (AlTiN)-Coated Carbide
     
    2 Flutes—30° Cutting Angle
    0.02"1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31100000
    0.02"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31500000
    0.02"1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31900000
     
    2 Flutes—60° Cutting Angle
    0.02"1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31200000
    0.02"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31600000
    0.02"1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32100000
     
    2 Flutes—90° Cutting Angle
    0.02"1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31300000
    0.02"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31700000
    0.02"1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32200000
     
    2 Flutes—120° Cutting Angle
    0.02"1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31400000
    0.02"3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N31800000
    0.02"1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N32300000
     
    3 Flutes—30° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33700000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34200000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34600000
     
    3 Flutes—60° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33800000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34300000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34700000
     
    3 Flutes—90° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N33900000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34400000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34800000
     
    3 Flutes—120° Cutting Angle
    —1/8"-0.0003" to 0"1/8"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34100000
    —3/16"-0.0003" to 0"3/16"2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34500000
    —1/4"-0.0004" to 0"1/4"2 1/2"Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingEngraving6502N34900000
     

    Electric Engravers

    Image of Product. Front orientation. Engravers. Electric Engravers, Plastic Body.

    Plastic Body

    Image of Product. Front orientation. Engravers. Electric Engravers, Stainless Steel Body.

    Stainless Steel Body

    Freehand permanent markings on a variety of materials. These engravers are often used to mark tools and equipment for easy identification and tracking. Adjust the stroke to mark materials as soft as plastic and wood and as hard as metal.
    Stainless Steel Body—More durable than plastic to stand up to wear over time. These engravers last longer and won’t get damaged in your toolbox.
    Carbide—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.
    Steel Tip—Ideal for engraving soft materials, such as plastic, wood, and leather. Steel tips are less durable than carbide tips.
    Diamond Tip—The most durable tip material. Diamond tips are the best choice for marking extra-hard materials, such as ceramic, glass, and stone.
    Engravers
    Carbide
    Engraver Tips
    Steel
    Engraver Tips
    Diamond
    Engraver Tips
    Body Material
    Max. Strokes per
    min., stroke/min
    Stroke
    Adjustability
    No. of Stroke
    Settings
    Tip
    Style
    Tip Material
    Carbide For Use On
    Steel For Use On
    Diamond For Use On
    Wt.,
    lb.
    Cord Lg.,
    ft.
    Certification
    Includes
    Each
    Each
    Each
    Each
    Dremel
    Plastic7,200Adjustable10PointedCarbideAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood——0.85UL Listed
    		0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)1613T10000001613T300000———01613T4000000
    Plastic7,200Adjustable10PointedCarbide, DiamondAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood—Acrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Nickel, Steel, Tin, Wood0.85UL Listed
    		0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)1613T2000001613T30000———01613T400000
     
    Other Engravers
    Plastic7,200Adjustable10PointedCarbideAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood——0.66ETL Listed
    		0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/), Shape Stencils1613T11000001613T120000———01613T400000
    Stainless Steel
    		7,200Adjustable2PointedCarbide, Steel, DiamondAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, WoodAcrylic Plastic, Leather, Rubber, WoodAcrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Nickel, Steel, Tin, Wood0.66——1864T220000001864T2400001864T23000001864T2500000
     

    Air-Powered Engraver Kits

    Image of Product. Front orientation. Engravers. Air-Powered Engraver Kits.
    Use these kits for everything from permanently marking materials to cleaning and finishing surfaces. They come with all you need to get started, including an engraver, four types of tips, and a tip holder. The engraver is more powerful than an electric option, so you can make the same markings in fewer passes and with less effort. A continuous dial lets you adjust the stroke to mark materials as soft as plastic and wood and as hard as metal. When swapping in another tip style, you must secure it in the engraver with the included tip holder. These engravers need lubrication to work properly.
    Industrial—Durable enough for everyday marking. Optional compatible tip styles (sold separately) add functionality, such as cleaning weld beads, scaling, or deburring. Optional tips require a tip holder (sold separately).
    Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.
    Steel Tip—Ideal for engraving soft materials, such as plastic, wood, and leather. Steel tips are less durable than carbide tips.
    Angled-Chisel Tip—A great choice for cleaning weld beads.
    Flat Tip—Grind these tips into a shape that works for your application.
    Flat-Chisel Tip—Best for scaling and deburring.
    Hose
    Max. Strokes per
    min., stroke/min
    Stroke
    Adjustability
    Tip Material
    Carbide
    Tip Style
    Carbide For Use On
    Steel Tip Style
    Steel For Use On
    Average Air Consumption
    @ Pressure
    Wt.,
    lb.
    Gender
    Pipe
    Size
    Thread
    Type
    ID
    Lg.,
    ft.
    Includes
    Each
    Industrial
    13,500AdjustableCarbide, SteelPointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, WoodAngled Chisel, Flat, Flat ChiselAcrylic Plastic, Leather, Rubber, Wood1.1 ft³/min @ 90 psi0.3Male1/4
    		NPT
    		3/16"8Air Filter, Carrying Case, Tip Holder, Replacement Pointed Carbide Tip1564T630000000
     
    Accessories and Replacements for Engravers
    Engraver Tips for Industrial Engravers
    Image of Product. Pointed Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engraver Kits, Carbide Tip, Pointed Tip.
    Image of Product. Flat Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engraver Kits, Steel Tip, Flat Tip.
    Image of Product. Angled Chisel Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engraver Kits, Steel Tip, Angled-Chisel Tip.
    Image of Product. Flat Chisel Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engraver Kits, Steel Tip, Flat-Chisel Tip.

    Pointed Tip

    Flat Tip

    Angled Chisel

    Tip

    Flat Chisel Tip

    Tip
    Material
    Style
    For Use On
    Each
    CarbidePointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood1564T68000000
    SteelFlatAcrylic Plastic, Leather, Rubber, Wood1564T7400000
    SteelAngled ChiselAcrylic Plastic, Leather, Rubber, Wood1564T6600000
    SteelFlat ChiselAcrylic Plastic, Leather, Rubber, Wood1564T65000000
    Replacement Air Hose, Engraver Tip Holders and Replacement Engraver Filters for Industrial Engravers
    Each
    Replacement Air Hose1564T69000000
    Engraver Tip Holder1564T6400000
    Replacement Filter1564T7200000

    Air-Powered Engravers

    Image of Product. Front orientation. Engravers. Air-Powered Engravers.
    More powerful than electric engravers to create the same markings in fewer passes and with less effort. Adjust the stroke with a continuous dial to mark materials as soft as plastic and wood and as hard as metal. These engravers need lubrication to work properly.
    Economy—Ideal for intermittent use. These engravers are only compatible with pointed carbide tips.
    Industrial—Durable enough for everyday marking. Optional compatible tip styles (sold separately) add functionality, such as cleaning weld beads, scaling, or deburring. Optional tips require a tip holder (sold separately).
    Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.
    Hose
    Max. Strokes per
    min., stroke/min
    Stroke
    Adjustability
    Tip
    Material
    Tip
    Style
    For Use On
    Average Air Consumption
    @ Pressure
    Wt.,
    lb.
    Gender
    Pipe
    Size
    Thread
    Type
    ID
    Lg.,
    ft.
    Includes
    Each
    Economy
    13,000AdjustableCarbidePointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood1.0 ft³/min @ 90 psi0.5Female1/4
    		NPT
    		1/4"5Hose1564T120000000
     
    Industrial
    13,500AdjustableCarbidePointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood1.1 ft³/min @ 90 psi0.3Female1/4
    		NPT
    		3/16"8Filter, Hose1564T62000000
     
    Accessories and Replacements for Engravers
    Engraver Tips for Economy Engravers
    Image of Product. Pointed Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engravers, Carbide Tip, Pointed Tip.

    Pointed Tip

    Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.
    Tip
    Material
    Style
    For Use On
    Each
    CarbidePointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood1564T13000000
    Engraver Tips for Industrial Engravers
    Image of Product. Pointed Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engravers, Carbide Tip, Pointed Tip.
    Image of Product. Flat Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engravers, Steel Tip, Flat Tip.

    Pointed Tip

    Flat Tip

    Image of Product. Angled Chisel Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engravers, Steel Tip, Angled-Chisel Tip.
    Image of Product. Flat Chisel Tip. Front orientation. ZoomedIn view. Engraver Tips. Air-Powered Engravers, Steel Tip, Flat-Chisel Tip.

    Angled Chisel

    Tip

    Flat Chisel Tip

    Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.
    Steel Tip—A good choice for marking soft materials, such as plastic, wood, and leather. These tips are less durable than carbide tips. They require a tip holder (sold separately).
    Flat Tip—Grind these tips into a shape that works for your application.
    Angled-Chisel Tip—A great choice for cleaning weld beads.
    Flat-Chisel Tip—Best for scaling and deburring.
    Tip
    Material
    Style
    For Use On
    Each
    CarbidePointedAcrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood1564T68000000
    SteelFlatAcrylic Plastic, Leather, Rubber, Wood1564T7400000
    SteelAngled ChiselAcrylic Plastic, Leather, Rubber, Wood1564T6600000
    SteelFlat ChiselAcrylic Plastic, Leather, Rubber, Wood1564T65000000
    Replacement Air Hose, Engraver Tip Holders and Replacement Engraver Filters for Industrial Engravers
    Each
    Replacement Air Hose1564T69000000
    Engraver Tip Holder1564T6400000
    Replacement Filter1564T7200000

    Cordless Engravers

    Image of Product. Front orientation. Engravers. Cordless Engravers.
    Carry these pen-sized engravers wherever you need to mark materials. At 20,000 rotations per minute, they match the power of corded electric engravers to carve away material for permanent markings. Powered by two AAA batteries (included).
    Engravers
    Engraver Tips
    Body
    Material
    Rotation
    Speed, rpm
    Rotational Speed
    Adjustability
    Tip
    Style
    Tip
    Material
    For Use On
    Wt.,
    lb.
    Batteries
    Included
    Each
    Each
    Aluminum
    		20,000FixedBallDiamondAcrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Nickel, Steel, Tin, Wood0.1Yes9424N110000009424N1200000
     

    Deep Marking Air-Powered Engravers

    Image of Product. Front orientation. Engravers. Deep Marking Air-Powered Engravers.
    Our fastest, deepest-cutting handheld engravers create marks that stay crisp and clear, even with wear and tear over time. With 30,000 strokes per minute, they can also make deep markings on hard materials. However, you can’t adjust their high stroke speed, so they may be too fast for shallow marking and engraving legibly on soft materials. These engravers need lubrication to work properly.
    Carbide Tip—Hard enough to mark metal and can also be used on plastic and wood.
    Engravers
    Engraver Tips
    Hose
    Max. Strokes per
    min., stroke/min
    Stroke Speed
    Adjustability
    Tip
    Material
    Tip
    Style
    For Use On
    Average Air Consumption
    @ Pressure
    Wt.,
    lb.
    Gender
    Pipe
    Size
    Thread
    Type
    ID
    Lg.,
    ft.
    Each
    Each
    30,000FixedCarbidePointedAcrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood1.1 ft³/min @ 90 psi0.3Female1/4
    		NPT
    		1/8"61602T1100000001602T12000000
    back to top