Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression. The second turn also reduces rattling from vibration.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance. For those with a mounting plate, the installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.

For technical drawings and 3-D models, click on a part number.

Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns. These latches help you maintain an IP65 level of protection when they're installed in a sealed enclosure. Each latch comes with one straight and two nonreversible offset cams to accommodate different latching distances. Choose the turn direction when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size. Select the turn direction when mounting the cam. Each latch comes with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and water from washdowns from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches have one or more cams that each have a fixed latching distance. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle. They have a cam that rotates to lock your enclosure. All come with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Turn the head a quarter turn to latch, then turn it another quarter turn to create compression and minimize rattling from vibration.

These latches help keep a sealed enclosure's contents safe from dust and water damage. This helps you maintain your sealed enclosure's IP or NEMA rating. All include a cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown.

For latches with a screw cam, you can easily tighten the screw to adjust the latching distance and tension over time.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers. All have an adjustable latching distance to adapt to a wider range of distances than other latches with a fixed distance. They’re best for tasks when precise distances are unknown. Adjust the latching distance before installing them. Select the turn direction of the latch when you mount the cam.

For technical drawings and 3-D models, click on a part number.

Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating. Also known as quarter-turn latches, they have a cam that turns 90° to hold your enclosure shut. Select the turn direction when mounting the cam. All come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use. Often used on cabinet doors and file drawers, these latches have a metal arm that swings to lock. All can be adjusted to a range of latching distances, which is useful if you don’t know the precise measurements. When mounting the cam, adjust the latching distance and choose your turn direction.

Zinc latches have a reversible offset cam that can be mounted in two different ways, which means these latches have two different latching distance ranges.

For technical drawings and 3-D models, click on a part number.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. Turn the head 90° to lock, then turn it another 90° to draw the cam firmly against your enclosure. The second turn results in a tighter hold, which is ideal for enclosures with a seal and reduces rattling from vibration.

These locks open with a hex key (sold separately), so they’re great for a facility where you don’t want to keep a complicated keying system. They have an adjustable latching distance to handle a wide range of latching distances, so they’re best for spots where precise distances are unknown. Adjust the position of the cam before installing them. They project further into the enclosure than those with a fixed latching distance.

Locks with a screw cam allow you to easily adjust the latching distance and tension over time.

IP65 and NEMA 4 locks have a gasket that blocks water, dust, and dirt from getting into a sealed enclosure through the lock, helping you maintain both ratings on your enclosure.

Pull tabs (sold separately) make opening your door or panel easier.

For technical drawings and 3-D models, click on a part number.

When installed on sealed assemblies, these locks guard against dust, dirt, and low-pressure washdowns. You'll commonly find these locks securing cabinet doors. All are keyed alike, so they're best if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with multiple cams to accommodate different latching distances. They have a stainless steel shutter that blocks water and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.

For technical drawings and 3-D models, click on a part number.

Wire these locks to a card reader, manual release button, or other access system to remotely open an enclosure door. These locks have a switch that opens the lock when it receives power from your access system. You can also send a signal to a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of an emergency, manually open these locks with a key. Choose them if you need several locks that open with the same key.

These locks secure your enclosure just like a traditional cam lock—an arm rotates 90° to pin your enclosure shut. This type of lock is commonly called a quarter-turn lock. They include multiple cams, so you can change their latching distance. A wing handle makes it harder to snag straps and other items on these locks than T- and L-handle locks.

The locks help keep your sealed enclosure's contents safe from dust and water damage—they help maintain your enclosure's IP65 rating for low-pressure washdowns. A stainless steel shutter blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need several locks that open with the same key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need locks that each open with a different key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn locks, they have an arm that rotates 90° to secure your enclosure. Choose them if you need several locks that open with the same key.

All of these locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. For locks with straight and offset cams, select the turn direction when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Similar to locks on a hotel safe, each user sets a new combination. The combinations can be four to eight digits long. After entering the combination on the keypad, turn the handle to unlatch. Select the turn direction when mounting the cam. Each lock comes with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The tight hold also reduces rattling from vibration. Add a padlock for extra security, so the handle can’t turn.

These locks include one cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

For technical drawings and 3-D models, click on a part number.

Maintain an IP65 rating on your sealed enclosure for low-pressure washdowns. A key shutter on these locks adds another layer of protection to guard the cylinder from water and dust. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. All locks can be locked with a key as well as a padlock for enhanced security. Choose them if you need locks that each open with a different key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from damaging paint or metal chips. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these latches are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn latches, they have an arm that rotates 90° to secure your enclosures.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Select the turn direction when mounting the cam.

For technical drawings and 3-D models, click on a part number.