With just a push, these latches firmly grip the strike bolt on your door to hold it shut. Also known as single-stage rotary latches, they only have one latching position to keep them closed. Push them hard to make sure they don’t accidentally open. They’re a heavier duty alternative to standard push-to-close latches for use in higher capacity applications. These latches come with a handle attached to the latch—no need to install a cable or rod.

For technical drawings and 3-D models, click on a part number.

The slanted edges on these latches guide them into the strike bolt on your door, so the door will close even if it’s misaligned. They’re also known as dovetail latches and two-stage rotary latches. A safety catch stops your door from opening accidentally if it’s not pushed in all the way. You’ll know it’s not fully latched if the door rattles. Give the door an extra push to shut it completely. When closed, these latches grip the strike bolt on your door to hold it firmly shut. They require over 700 lbs. of pulling force to yank open, so they stay closed even in demanding applications. To open these latches remotely, you can connect them to a handle with a cable or rod (not included). This is especially useful when you want your latch hidden but your handle in an easy-to-reach spot.

Latches with two latch points let you open the latch using two handles.

FMVSS rated latches have been designed and tested to meet rigorous Federal Motor Vehicle Safety Standard requirements.

For technical drawings and 3-D models, click on a part number.

Open your door with a card reader or other access control device. In case of emergency, these latches have a lever to manually open your door. You can also connect a cable, rod, or handle (not included) to operate these latches remotely in areas with obstructions. To close these latches, push them in, and they firmly grip the strike bolt or plate on your door to hold it shut. Also known as single-stage rotary latches, they only have one latching position to keep them closed. Push them hard to make sure they don’t accidentally open.

Latches with Bluetooth operate wirelessly. They have a spring-loaded plunger that pushes the door open, so you don’t have to pull it open yourself.

Control modules (sold separately) are required to operate these latches. Connect and operate up to six latches with a single module.

Wire connectors (sold separately) easily connect the control modules (sold separately) to power and the rotary latches.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

For technical drawings and 3-D models, click on a part number.

Secure enclosure doors with these T-handle latches. All have a cam that rotates to keep doors closed.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.

For technical drawings and 3-D models, click on a part number.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets. The handle and latch are each sold separately. Select the turn direction of the latch when mounting the cam.

For technical drawings and 3-D models, click on a part number.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

Use a 5/16" hex key to open and close these locks. They’re good for use on sliding doors. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the lock can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

Lift and turn the handle 180° to open and close this lock. It has a spring-loaded handle that provides a tight hold and compensates for slight misalignment. It's keyed alike, choose it if you need several locks that open with the same key. Capacity is the maximum amount of force the latch can withstand.

For technical drawings and 3-D models, click on a part number.