Use these rotating joints to transfer high-temperature materials from your supply line.

Joints are aluminum, which is lighter than other metals.

Supply air to two different rotating objects from a stationary supply.

Joints are for two-way flow and are brass for good corrosion resistance.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies.

Use these fittings with power washer guns and in other high-pressure water supply applications.

Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.

Fittings have sharp barbs that grip push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use in low-pressure hydraulic applications up to 350 psi.

With just a vise and a wrench, make or repair hose assemblies in the field.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Couplings consist of a plug and a socket that connect quickly. Use them if you need frequent access to a line. They are designed for low-pressure steam applications up to 300 psi.

No need for expensive crimping tools—these fittings make air conditioning and refrigeration assemblies with clamps.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.

Fittings have good corrosion resistance.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

Fittings can withstand temperatures up to 200° F.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

A tube adapter sits flush against the flat face of the fitting so you can slide the steel tubing and fitting sideways to disconnect in cramped spaces. Also known as zero-clearance fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

Polished to at least a 15 Ra finish on the inside, these fittings have an ultra-smooth interior surface that helps prevent contamination. They are also known as ultra-high-purity fittings.

Able to stand up to frequent use, these linkages offer excellent wear resistance. They consist of ball joint rod ends with a ball stud attached to simplify mounting.

These internally threaded linkages have a slippery PTFE liner that reduces wear and eliminates the need for lubrication.

Along with excellent wear resistance, these linkages have a grease fitting for easy lubrication. An internally threaded rod end connects to threaded rods, studs, and other parts with male threads.

An oil-embedded bronze insert slowly releases lubricant throughout the life of the joint.

A spring-loaded sleeve allows for rapid assembly and disassembly. These ball joint linkages are made of steel.

Use these bent linkages for light duty applications.

Use these linkages to create inline pivoting connections. They have internal threads on one end and external threads on the other.

Use these U-joints in wet environments to connect and transfer torque between two shafts.

Customize the bores of these U-joints to fit the exact dimensions of your shafts.

Ideal for use in assemblies that change frequently, these U-joints have clamping screws that can be quickly loosened when you need to move them.

Since these U-joints have zero backlash (no play), there’s no motion lost when your shafts change direction, so machines move smoothly with more accurate, repeatable motion. As double U-joints, they connect and transfer torque between two shafts that are either parallel to each other or are misaligned at an angle.

Drill custom bore sizes to connect shafts that are either parallel to each other or are misaligned at an angle.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.