Clear All
Pilot Type Pilot Type | Show |
|---|
|
Pilot Type Pilot Type | Hide |
|---|
|
Cut Style Cut Style |
|---|
 |  |
| Flush Trimming | Corner Rounding |
 |  |
| Chamfer | Slotting |
 | |
| Rabbet |
System of Measurement System of Measurement |
|---|
|
For Tool Type For Tool Type |
|---|
|
For Use On For Use On |
|---|
|
Cutting Diameter Cutting Diameter |
|---|
|
|
|
Length of Cut Length of Cut |
|---|
|
|
|
Length Length |
|---|
Corner Style Corner Style |
|---|
|  |
| Rounded | Rounded with Beading |
 |  |
| Cove | Wavy |
 | |
| Roman Ogee |
Shank Type Shank Type |
|---|
 | Round |
Individual/Set Individual/Set |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Flush-Trimming Router Bits
Flush-Trimming Cut Style (Bottom Pilot)
Flush-Trimming Cut Style (Top Pilot)
Carbide (Spiral Flutes)
Carbide-Tipped High-Speed Steel (Bottom Pilot)
Carbide-Tipped High-Speed Steel (Top Pilot)
Diamond-Tipped Carbide (Bottom Pilot)
Cut layers of material flush to one another or make cuts along a template. All bits have a pilot to guide cuts.
Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.
Bottom-pilot bits trim material from an upper layer of the workpiece so that it is flush with the layer below. In addition to flush trimming, they can be used to cut along a template placed below the workpiece.
Top-pilot bits cut a lower layer of the workpiece flush to the layer above. In addition to flush trimming, they can be used for pattern cutting with a template placed above the workpiece.Carbide-tipped high-speed steel bits are for use on wood and plastic laminate. Micrograin carbide and diamond-tipped carbide bits are for use on aluminum.
For technical drawings and 3-D models, click on a part number.
| Cutting Dia. | Lg. of Cut | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | Flute Type | For Tool Type | For Use On | Each | |
Uncoated Carbide | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Bottom Pilot | |||||||||||
| 1/4" | 3/4" | 1/4" | 3" | Ball Bearing | 1/4" | 2 | Spiral | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate, Soft Plastic, Foam, Hard Plastic, Plastic Composites | 0000000 | 000000 |
| 1/2" | 1 1/8" | 1/2" | 4" | Ball Bearing | 1/2" | 2 | Spiral | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate, Soft Plastic, Foam, Hard Plastic, Plastic Composites | 0000000 | 000000 |
Uncoated Carbide-Tipped High-Speed Steel | |||||||||||
Bottom Pilot | |||||||||||
| 1/4" | 1/2" | 1/4" | 2 1/4" | Ball Bearing | 1/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/4" | 1" | 1/4" | 2 1/2" | Ball Bearing | 1/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 3/8" | 1/2" | 1/4" | 2 1/4" | Ball Bearing | 3/8" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 3/8" | 1" | 1/4" | 2 3/4" | Ball Bearing | 3/8" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 3/8" | 1 1/4" | 1/4" | 2 3/8" | Ball Bearing | 3/8" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1/2" | 1/4" | 2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 1/2" | 1/2" | 1/4" | 2" | Ball Bearing | 1/2" | 3 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1" | 1/4" | 2 3/4" | Ball Bearing | 1/2" | 3 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 1/2" | 1" | 1/2" | 3 1/4" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 1/2" | 1 1/2" | 1/2" | 3 7/8" | Ball Bearing | 1/2" | 3 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1 1/2" | 1/2" | 4 1/4" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 1/2" | 2" | 1/2" | 4 1/4" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 00000000 | 00000 |
| 1/2" | 2" | 1/2" | 4 5/8" | Ball Bearing | 1/2" | 3 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 3/4" | 1" | 1/2" | 3 1/4" | Ball Bearing | 3/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 3/4" | 1 1/4" | 1/2" | 3 1/2" | Ball Bearing | 3/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
Top Pilot | |||||||||||
| 3/8" | 1/2" | 1/4" | 2" | Ball Bearing | 3/8" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1/4" | 1/4" | 1 5/8" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1/2" | 1/4" | 2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 1/2" | 1" | 1/4" | 2 1/2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 3/4" | 1" | 1/2" | 3" | Ball Bearing | 3/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
| 3/4" | 1 3/4" | 1/2" | 3 3/4" | Ball Bearing | 3/4" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood, Plastic Laminate | 0000000 | 00000 |
Uncoated Micrograin Carbide | |||||||||||
Bottom Pilot | |||||||||||
| 1/4" | 5/8" | 1/4" | 2 3/8" | Ball Bearing | 1/4" | 2 | Spiral | Hand Router, Router Table | Wood, Particleboard, Plywood, Aluminum, Plastic Laminate, Soft Plastic, Foam, Hard Plastic, Plastic Composites | 0000000 | 00000 |
Uncoated Diamond-Tipped Carbide | |||||||||||
Bottom Pilot | |||||||||||
| 1/2" | 7/16" | 1/4" | 2 5/16" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Aluminum, Fiberglass, Plastic Composites | 0000000 | 000000 |
| 1/2" | 1" | 1/4" | 2 13/16" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Aluminum, Fiberglass, Plastic Composites | 0000000 | 000000 |
Flush-Trimming and Chamfer Router Bits
Chamfer Cut Style
Flush-Trimming Cut Style
These bits have a straight cutting edge for flush trimming and an angled cutting edge for making 22° chamfer cuts. They're for use on countertops and other plastic laminate material. For flush trimming, hold the bit at a height where only the straight cutting edge makes contact with the workpiece. For chamfer cuts, position the bit so the angled cutting edge makes contact with the workpiece. A ball-bearing pilot guides the bit for accurate cuts. All are carbide-tipped high-speed steel for a long tool life and fast cutting speeds.
| Cutting Dia. | Lg. of Cut | Chamfer Cut Angle | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Flutes | |||||||||||
| 1/2" | 3/8" | 22° | 1/4" | 2" | Ball Bearing | 1/2" | 2 | Hand Router | Plastic Laminate | 00000000 | 000000 |
Slotting Router Bits
Slotting Cut Style
With a ball-bearing pilot and wide cutting wings, these bits cut straight and smooth slots into wood. All are made of carbide-tipped high-speed steel for a long tool life and fast cutting speeds.
| Cutting Dia. | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | For Tool Type | For Use On | Each | |
1/16" Cutter Thick. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped High-Speed Steel | |||||||||
| 1 7/8" | 1/4" | 2 3/8" | Ball Bearing | 7/8" | 3 | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 000000 |
1/8" Cutter Thick. | |||||||||
Uncoated Carbide-Tipped High-Speed Steel | |||||||||
| 1 7/8" | 1/4" | 2 3/8" | Ball Bearing | 7/8" | 3 | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 00000 |
1/4" Cutter Thick. | |||||||||
Uncoated Carbide-Tipped High-Speed Steel | |||||||||
| 1 7/8" | 1/4" | 2 3/8" | Ball Bearing | 7/8" | 3 | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 00000 |
Rabbet Router Bits
Rabbet Cut Style
Make square, recessed rabbet cuts for joining wood. These bits are made of carbide-tipped high-speed steel for a long tool life and fast cutting speeds.
Bits with 1 3/8" cutting diameter include interchangeable bearings in a range of sizes to adjust the rabbet width.
| Cutting Dia. | Rabbet Wd. | Lg. of Cut | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | Flute Type | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 1/4" | 3/8" | 1/2" | 1/4" | 2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 000000 |
| 1 3/8" | 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" | 1/2" | 1/4" | 2" | Ball Bearing | 3/8", 1/2", 5/8", 3/4", 7/8", 1 1/8" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 00000 |
Corner-Rounding Router Bits
Rounded Corner Style (Carbide-Tipped High-Speed Steel)
Rounded with Beading Corner Style
Cove Corner Style
Wavy Corner Style
Roman Ogee Corner Style
Choose from bits that cut rounded, cove, wavy, or Roman ogee corners along the edges of your workpiece.
Carbide-tipped high-speed steel bits are for use on wood. A ball-bearing pilot helps position the bit for straight cuts.
| Cutting Dia. | Cut Radius | Lg. of Cut | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | Bead Radius | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rounded Corner Style | ||||||||||||
| 5/8" | 1/16" | 5/16" | 1/4" | 1 3/4" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 000000 |
| 3/4" | 1/8" | 3/8" | 1/4" | 2 1/8" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 13/16" | 5/32" | 15/32" | 1/4" | 2 3/32" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 7/8" | 3/16" | 1/2" | 1/4" | 2" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1" | 1/4" | 7/16" | 1/4" | 1 29/32" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/4" | 3/8" | 5/8" | 1/4" | 2 1/32" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/2" | 1/2" | 3/4" | 1/4" | 2 5/32" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/2" | 1/2" | 3/4" | 1/2" | 2 11/16" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 3/4" | 5/16" | 9/16" | 1/4" | 2 1/4" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 2" | 3/4" | 1 1/32" | 1/2" | 3" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
Rounded with Beading Corner Style | ||||||||||||
| 5/8" | 1/16" | 5/16" | 1/4" | 1 3/4" | Ball Bearing | 3/8" | 2 | 1/16" | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 7/8" | 3/16" | 1/2" | 1/4" | 2" | Ball Bearing | 3/8" | 2 | 3/16" | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1" | 1/4" | 7/16" | 1/4" | 1 29/32" | Ball Bearing | 3/8" | 2 | 3/16" | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/4" | 3/8" | 23/32" | 1/4" | 2 3/8" | Ball Bearing | 3/8" | 2 | 3/16" | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/2" | 1/2" | 13/16" | 1/4" | 2 13/32" | Ball Bearing | 3/8" | 2 | 3/16" | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
Cove Corner Style | ||||||||||||
| 7/8" | 1/4" | 9/16" | 1/4" | 2" | Ball Bearing | 3/8" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 1/8" | 3/8" | 9/16" | 1/4" | 2" | Ball Bearing | 3/8" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1 3/8" | 1/2" | 5/8" | 1/4" | 2 1/8" | Ball Bearing | 3/8" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
Wavy Corner Style | ||||||||||||
| 1 1/4" | __ | 5/8" | 1/4" | 2 1/4" | Ball Bearing | 1/2" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
Roman Ogee Corner Style | ||||||||||||
| 1 1/8" | 5/32" | 9/16" | 1/4" | 2" | Ball Bearing | 3/8" | 2 | __ | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
Chamfer Router Bits
Chamfer Cut Style
Ball-Bearing Pilot
These bits make chamfer, bevel, and other angled cuts in wood.
Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.
For technical drawings and 3-D models, click on a part number.
| Cutting Dia. | Lg. of Cut | Cut Angle | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | Flute Type | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5/8" | 1/4" | 15° | 1/4" | 2 1/8" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 000000 |
| 3/4" | 1/4" | 25° | 1/4" | 2 1/8" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 0000000 | 00000 |
| 7/8" | 1/2" | 25° | 1/4" | 1 7/8" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1" | 1/2" | 45° | 1/4" | 2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |
| 1" | 5/8" | 45° | 1/2" | 2 1/2" | Ball Bearing | 1/2" | 2 | Straight | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 00000 |