McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    15 Products

    Rotary Tool Router Bit Kits for Dremel Grinders

    Image of ProductInUse. Ball Cut Style. Front orientation. Ball Cut Style.
    Image of ProductInUse. Chamfer Cut Style. Front orientation. Chamfering Cut Style.
    Image of ProductInUse. Corner Rounding Cut Style. Front orientation. Corner-Rounding Cut Style.
    Image of ProductInUse. Square Cut Style. Front orientation. Square Cut Style.

    Ball Cut Style

    Chamfer Cut Style

    Corner Rounding Cut

    Style

    Square Cut Style

    Image of Product. Front orientation. Rotary Tool Router Bits.
    Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.
    No. of
    Pieces
    For Mfr. Model No.
    Includes
    Cut Style
    Each
    High-Speed Steel
    6100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 8220, 8240, 8250, 8260Six Router BitsBall, Chamfering, Corner Rounding, Square0000000000000
     

    Chamfering Router Bits

    Image of ProductInUse. Chamfering Cut Style. Front orientation. Router Bits. Chamfering Router Bits.

    Chamfering Cut Style

    These bits make chamfer, bevel, and other angled cuts in wood.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of Product. Front orientation. Router Bits. Chamfering Router Bits, Uncoated Carbide-Tipped High-Speed Steel, Chamfering Cut Style, Straight Flutes, Ball Bearing.

    Chamfering

    Cut Style,

    Straight

    Flutes, Ball

    Bearing

    Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.
    Cutting
    Dia.
    Lg. of
    Cut
    Cut
    Angle
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Chamfering Cut Style
     
    Straight Flutes
    5/8"1/4"15°1/4"2 1/8"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    3/4"1/4"25°1/4"2 1/8"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood000000000000
    7/8"1/2"25°1/4"1 7/8"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1"1/2"45°1/4"2"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1"5/8"45°1/2"2 1/2"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Uncoated Carbide
    Image of Product. Front orientation. Router Bits. Chamfering Router Bits, Uncoated Carbide, Chamfering Cut Style, Straight Flutes, Solid.

    Chamfering Cut

    Style, Straight

    Flutes, Solid

    Solid carbide bits offer the longest tool life and fastest cutting speeds, so they can be used on wood and laminate. A solid pilot guides the bit while routing. The extreme hardness of these bits makes them brittle, so they're not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.
    Cutting
    Dia.
    Lg. of
    Cut
    Cut
    Angle
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    No. of
    Flutes
    For Tool
    Type
    For Use On
    Each
    Chamfering Cut Style
     
    Straight Flutes
    1/4"1/4"7°1/4"1 1/2"Solid1CNC MachineWood, Laminate00000000000000
     

    Router Bit Sets

    Image of ProductInUse. Chamfering Cut Style. Front orientation. Chamfering Cut Style. Router Bit Sets.
    Image of ProductInUse. Corner Cut Style. Front orientation. Corner-Rounding Cut Style. Router Bit Sets.
    Image of ProductInUse. Square Cut Style. Front orientation. Square Cut Style. Router Bit Sets.
    Image of ProductInUse. Flush-Trimming Cut Style. Front orientation. Flush-Trimming Cut Style. Router Bit Sets.

    Chamfering Cut Style

    Corner Cut Style

    Square Cut Style

    Flush-Trimming Cut

    Style

    Image of ProductInUse. Groove Cut Style. Front orientation. Groove Cut Style. Router Bit Sets.
    Image of ProductInUse. Hinge Mortise Cut Style. Front orientation. Hinge-Mortise Cut Style. Router Bit Sets.
    Image of ProductInUse. Joining Cut Style. Front orientation. Joining Cut Style. Router Bit Sets.
    Image of ProductInUse. Panel Pilot Cut Style. Front orientation. Panel-Pilot Cut Style. Router Bit Sets.

    Groove Cut Style

    Hinge Mortise Cut Style

    Joining Cut Style

    Panel Pilot Cut Style

    Image of Product. Front orientation. Router Bits. Router Bit Sets.
    Keep a variety of router bits on hand to cut grooves, chamfers, and other detailed shapes into wood and plastic. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
    Flush-Trimming Cut Style—Flush-trimming bits cut layers of material flush to one another or make cuts along a template.
    Hinge-Mortise Cut Style—Hinge-mortise bits create large, shallow recesses.
    Joining Cut Style—Joining bits create shapes that fit together in order to form joints.
    Panel-Pilot Cut Style—Panel-pilot bits have a pointed tip that creates starter holes for efficient plunge cutting in wood. To make precise cutouts, use the top of the tip as a pilot and guide the bit along a template placed below the workpiece.
    No. of
    Pieces
    Cut Style
    Includes
    Shank
    Dia.
    For Tool Type
    For Use On
    Each
    Uncoated Carbide-Tipped High-Speed Steel
     
    Multipurpose
    6Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Joining    		One Chamfer Router Bit: 1-5/16" Cutting Diameter
    One Flush-Trimming Router Bit: 3/8" Cutting Diameter
    One Dovetail Router Bit: 1/2" Cutting Diameter
    One Rounded-Corner Bit: 1/4" Cutting Diameter
    Two Square Router Bits: 1/4" and 1/2" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite000000000000000
    10Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Hinge Mortise
    Joining    		One Chamfer Router Bit: 1-5/16" Cutting Diameter
    Two Rounded-Corner Bits: 1/4" and 3/8" Cutting Diameters
    One Flush-Trimming Router Bit: 1/2" Cutting Diameter
    One Rounded-Groove Router Bit: 1/4" Cutting Diameter
    One V-Groove Router Bit: 9/16" Cutting Diameter
    One Hinge-Mortise Router Bit: 1/2" Cutting Diameter
    One Dovetail Router Bit: 1/2" Cutting Diameter
    Two Square Router Bits: 1/4" and 3/4" Cutting Diameters    		1/2"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
    15Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Joining    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    One Cove Router Bit: 3/8" Cutting Diameter
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    One V-Groove Router Bit: 5/8" Cutting Diameter
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Roman Ogee Router Bit: 5/32" Cutting Diameter
    One Slotting Router Bit: 1-1/4" Cutting Diameter
    One Tongue-and-Groove Router Bit: 1-1/4" Cutting Diameter
    Three Square Router Bits: 1/4", 1/2", and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
    30Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Hinge Mortise
    Joining
    Panel Pilot    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    One Beaded-Corner Router Bit: 1-1/16" Cutting Diameter
    One Wavy-Corner Router Bit: 1-1/4" Cutting Diameter
    Five Rounded-Corner Router Bits: 1/8", 1/4", 5/16", 3/8", and 1/2" Cutting Diameters
    Two Cove Router Bits: 7/8" and 1-1/8" Cutting Diameters
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Hinge-Mortise Router Bit: 1/2" Cutting Diameter
    One Panel-Pilot Router Bit: 5/16" Cutting Diameter
    Three Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    Two Rabbet Router Bits: 1-1/4" Cutting Diameter
    Two Rounded-Groove Router Bits: 1/2" and 3/4" Cutting Diameters
    Two V-Groove Router Bits: 5/8" Cutting Diameter
    Seven Square Router Bits: 5/32", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
     
    Trimming, Edging
    6Chamfering
    Corner Rounding
    Flush Trimming    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite0000000000000
     

    Flush-Trimming and Chamfering Router Bits

    Image of Product. Front orientation. Router Bits. Flush-Trimming and Chamfering Router Bits .
    Create straight and chamfering cuts on countertops or other laminate material without changing bits. For flush trimming, hold the bit at a height where only the straight cutting edge contacts the workpiece. For chamfering cuts, use the angled cutting edge. A ball-bearing pilot guides the bit for accurate cuts and produces low friction for smooth operation. The straight flutes quickly remove material and leave a rough finish. These bits cannot make plunge cuts, so they're best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of ProductInUse. Chamfering Cut Style. Front orientation. Router Bits. Flush-Trimming and Chamfering Router Bits , Uncoated Carbide-Tipped High-Speed Steel, Chamfering Cut Style and Flush-Trimming Cut Style.
    Image of ProductInUse. Flush-Trimming Cut Style. Front orientation. Router Bits. Flush-Trimming and Chamfering Router Bits , Uncoated Carbide-Tipped High-Speed Steel, Chamfering Cut Style and Flush-Trimming Cut Style.

    Chamfering Cut Style

    Flush-Trimming Cut

    Style

    Carbide-tipped high-speed steel bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
    Cutting
    Dia.
    Lg. of
    Cut
    Chamfering
    Cut Angle
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    For Tool
    Type
    For Use
    On
    Each
    Chamfering Cut Style and Flush-Trimming Cut Style
     
    Straight Flutes
    1/2"3/8"22°1/4"2"Ball Bearing1/2"2Hand RouterLaminate00000000000000
     
    Uncoated Micrograin Carbide
    Image of ProductInUse. Chamfering Cut Style. Front orientation. Router Bits. Flush-Trimming and Chamfering Router Bits , Uncoated Micrograin Carbide, Chamfering Cut Style and Flush-Trimming Cut Style.
    Image of ProductInUse. Flush-Trimming Cut Style. Front orientation. Router Bits. Flush-Trimming and Chamfering Router Bits , Uncoated Micrograin Carbide, Chamfering Cut Style and Flush-Trimming Cut Style.

    Chamfering Cut Style

    Flush-Trimming Cut

    Style

    Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.
    Cutting
    Dia.
    Lg. of
    Cut
    Chamfering
    Cut Angle
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    For Tool Type
    For Use
    On
    Each
    Chamfering Cut Style and Flush-Trimming Cut Style
     
    Straight Flutes
    3/4"3/8"9°1/4"2"Ball Bearing5/8"3Hand Router, Router Table, CNC MachineLaminate0000000000000
    7/8"3/8"22°1/4"2"Ball Bearing5/8"3Hand Router, Router Table, CNC MachineLaminate000000000000
     
    back to top